Connects2 CAM-VW6-AD User manual

www.connects2.com
CAM-VW6-AD
Rear Camera/AV Input Interface
Application:
Volkswagen Golf 2003>, Passat 2002>, Touareg 2002>,
Touran 2002>, T5 2003>
For Vehicles with MFD2/SRN Navigation Head Units

www.connects2.comwww.connects2.com
2
ABOUT THIS PRODUCT...
CAM-VW6-AD
Add On Reverse Camera Interface for OEM Systems allows the addition of an
aftermarket reverse camera to the OEM screen - for PAL and NTSC cameras.
Factory TV tuner and factory rear-view camera must not be installed.
Prior to Installation
Read the manual prior to installation. Technical knowledge is necessary for installa-
tion. The place of installation must be free of moisture and away from heat sources.
Please ensure you use the correct tools to avoid damage to the vehicle or product.
Connects2 can not be held responsible for the installation of this product.
Technical Support
Connects2 want to provide a fast and suitable resolution should you encounter any
technical issues. With this in mind, when contacting Connects2, try to provide as
much Information as possible. This will speed up the process and help us to help you.
Please use our dedicated online technical support centre: support.connects2.com
Subscribe to our YouTube Channel for installation
guides and tips... www.youtube.com/connects2

www.connects2.comwww.connects2.com 3
CONNECTION DIAGRAM/INSTALLATION
Installation
NB: Before installation, switch off ignition, disconnect the vehicle battery and
remove the vehicle’s head unit.
The interface is installed behind the vehicle’s head unit.
Interface Box
Harness

www.connects2.comwww.connects2.com
4
INSTALLATION
Connecting Interface Box, Harness and Head-Unit
1. Plug the harness into the 12pin Molex of Interface box.
2.Plug the female 18pin AMP connector of the harness into the male 18pin AMP
connector of the head-unit.
3. If connecting an AV-source:
Connect the red cable of the harness to +12V ACC and the black cable of the
harness to ground. Do not connect the green wire.
If connecting a rear-view camera:
Connect the red and green cable of the harness to +12V reverse gear light and the
black cable of the harness to ground.
Note: If the 18pin AMP socket of the head-unit is already occupied, the vehicle may
already have a factory TV-tuner installed. To complete installation, it must be unin-
stalled. Disconnect the female 18pin AMP-connector of the factory harness and
disconnect all wires from the factory TV-tuner.
Interface Box
Harness

www.connects2.comwww.connects2.com 5
INSTALLATION
Connecting to AV-Source or Aftermarket Rear-View Camera
1. Connect the video RCA of the AV-source or the after-market rear-view camera
to the female video RCA-connector of the harness.
2. If connecting an AV-Source, connect the audio RCA of the AV-source to the
female audio RCA-connector of the harness.
Note: The interface is initialised to PAL. To connect an NTSC source, remove and
isolate pin 15 of the 18pin female AMP connector of harness
Activating AV Source
CD-version Press AUDIO and select “AV“
DVD-version Press CD and select “AUX“
Harness

www.connects2.comwww.connects2.com
6
NOTES

www.connects2.comwww.connects2.com 7
NOTES

www.connects2.com
8
NOTES