Connects2 Vision CAM-TY5-RT User manual

Toyota
Avalon 2014>
Avensis 2014>
Camry 2014>
Corolla 2014>
Highlander 2014>
Hilux 2014>
Land Cruiser 2014>
Prius + 2014>
RAV4 2014>
Sequoia 2014>
Sienna 2014>
Tacoma 2014>
Verso 2014>
Yaris 2014>
4Runner 2014>
User Manual
Prior to Installation
Read the manual prior to installation. Technical knowledge is necessary for installa-
tion. The place of installation must be free of moisture and away from heat sources.
Please ensure you use the correct tools to avoid damage to the vehicle or product.
Connects2 can not be held responsible for the installation of this product.
Technical Support
Connects2 want to provide a fast and suitable resolution should you encounter any
technical issues. With this in mind, when contacting Connects2, try to provide as much
Information as possible. This will speed up the process and help us to help you.
Please use our dedicated online technical support centre: support.connects2.com
OEM Reverse Camera Retention Interface
For Toyota Vehicles
APPLICATION:
DISCLAIMER:
CAM-TY5-RT
CAM-TY5-RT_IG_en-GB_v1

www.connects2.com
2
Connects2Vision
CONTENTS
- OEM Camera Retention Interface
- Instructions
INSTALLATION
1. Connect the yellow RCA connector from the interface to the camera input
on the rear of the aftermarket head unit
2. Connect the white connector (24 Pin Connector) from the interface to the
vehicle harness
3. Connect the black ying wire to ground
4. Connect the red ying wire to vehicle’s 12V ignition
5. Connect the brown ying wire to vehicle’s reverse signal feed
Subscribe to our YouTube Channel for installation
guides and tips... www.youtube.com/connects2