Conquer Industry CQL1696-B User manual

CQL1696-B Bluetooth Speaker
Instruction Manual (Read before proceeding)
Power:
zPlease charge your Bluetooth speaker fully before its first use.
To charge the battery:
zUsing a Micro USB Charging Cable (included), insert the USB power cable into the
micro USB port located on the back of the speaker. Connect the other end of the USB
cord into a powered USB source such as a computer, laptop or USB AC adapter.
zWhen your Bluetooth speaker is charging, the indicator light will turn red.
zOnce your Bluetooth speaker is fully charged, the red light will turn off.
Playing Music via Bluetooth
zTurn your Bluetooth speaker on by sliding the power switch located on the back of the
speaker to ‘ON’ position. There is no Bluetooth LED indicator hole for this unit.
The Bluetooth indicator light can be seen only from the holes of the speaker
flashing quickly.
zMake sure the Bluetooth function on your device is turned on.
zSearch the speaker named,” CQL1696-B ”.
zOnce you have selected the pair name, your device will pair without a password. (If
your device prompts for a password, enter the password”0000”.)
zOnce your speaker is paired, a tone will be heard and the blue indicator light will
begin to flash slowly (It can only be seen from the speaker holes. No indicator
hole for this.).
zStart playing music on your device. Make sure that you keep your device within a 33
feet range of your Bluetooth speaker.
zAdjust the volume of your device to a comfortable level.
zTurn off the unit when not in use.
Light Operation
zSwitch the button to “on” position, the Bluetooth and the LED light will both be
enabled.
zPlay music on your mobile device, the light will dance to the music.
zTurn off the unit, the light will turn off accordingly.
zCaution:
zThis is not a toy. Please keep away from children.
zPlease keep away from water / heat.
zLow power may cause poor connection even no working of Bluetooth.
zDo not overcharge the battery.
zBattery pack shall not be exposed to excessive heat such as sunshine, fire or the like.
NOTE:
**There is only “on off” on the speaker, no middle position. Turn the speaker on, the

Bluetooth and LED lights will both be on.
**There is only charging indicator hole for this unit. No Bluetooth indicator hole.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions (1)this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.