Conrad Sygonix 1597114 User manual

App Instruction Manual
Sygonix Home Starter Kit
Item No. 1597114
www.conradconnect.de

- 2 -
Contents
Conrad Connect .............................................. 4
Symbols........................................................... 4
Core functions ................................................. 5
App to device communication ......................... 6
App – Installation............................................. 7
App – Deinstallation ........................................ 7
App – Multiple mobile devices......................... 7
App – User account......................................... 8
App – Landing page ...................................... 10
App – Settings ............................................... 11
App – Updates............................................... 11
Smart devices – Firmware update................. 12
Gateway – Add .............................................. 13
Gateway – Gateway page ............................. 14
Gateway – Settings ....................................... 15
Gateway – Speaker volume .......................... 15
Gateway – Indicator light............................... 16
Gateway – Reset........................................... 18
Sensors – Sensor types ................................ 19

- 3 -
Sensors – Add sensor ................................... 19
Sensors – Sensor page................................. 21
Sensors – Delete sensor ............................... 22
Sensors – Congure sensor.......................... 23
Sensors – Enable/disable sensor.................. 24
Function – Alerts............................................ 25
Function – Night light mode........................... 27
Function – Alarm clock .................................. 29
Function – Scenes......................................... 31

- 4 -
Conrad Connect
Your product is compatible with the Conrad
Connect IoT platform at www.conradconnect.de.
You can set up a personal account at the given
URL.
Symbols
The following instructional symbols are used in
this instruction manual.
This triangle indicates important
instructions contained in these
operating instructions that must be
followed.
This symbol indicates that special
advice and notes on operation are
provided.

- 5 -
Core functions
Measuring and recording
Sensors measure and record illuminance,
noise, pressure, temperature and humidity.
Event minitoring
Events are monitored and logged in the app.
Alert mode
You are alerted of events important to you.
Night light mode
Determine the behaviour of the gateway during
the night.
Alarm clock
The alarm mode acts as a regular alarm clock.
Scenes
A scene is a set of procedures executed when
the scene is triggered.

- 6 -
App to device communication
■In order to add a new device to the app,
the mobile device that runs the app and the
smart device must connect to your WLAN.
■Once a new device was added, you can
control the smart device through the app via
WLAN or mobile network.
■Subnetting: If you subnetted your WLAN
network, then mobile device and smart
device must be hosts on the same subnet.

- 7 -
App – Installation
Apps are available for Android and iOS
mobile devices. Make sure your mobile device
satises the minimum requirements as outlined
on the app page before downloading.
1. Head to the respective app store and
download the app named 'Sygonix Home'
onto your mobile device.
2. Set up a user account as outlined under
App – User account.
App – Deinstallation
If you de-install the app from your mobile
device, the settings are not lost and become
available again as soon as you re-install the
app and login with the same account details.
Settings are stored under your 'Sygonix'
account in the cloud. Refer to App – User
account.
App – Multiple mobile devices
You can install the app on multiple mobile
devices and login with the same account
details to control the same set of smart devices
from different mobile devices.

- 8 -
App – User account
A 'Sygonix' account is required for you to
operate the smart device.
Your smart device cannot be linked to
two accounts at the same time.
Adding the smart device to a second
account will remove it from the rst
account.
Reset the smart device before linking
to another account.
Setting up a new account
1. Open the app.
2. Press Sign Up.
3. Enter user name and password, then
conrm with Sign Up.
4. A new account will be set up for you.
Wait until you receive the conrmation for
successful setup.
Logging in
1. Open the app.
2. Press Login.
-If you have logged in before, the
username and password should appear in
the corresponding elds.
-Tick Login automatically if you wish
the app to log you in when you start the
app.
3. Conrm with Login.

- 9 -
4. If you login successfully, the landing page
with the device list will appear.
-If no smart devices have yet been set up,
the device list is blank.
Account settings
On the landing page press to open the
account settings.
Account settings allow you to:
■ Add a prole picture
■Change the account name
■Change the account password
■Log out of your account
After logging out of your current account you
can log in with a different one.
Integrating with Conrad Connect
Note that your 'Sygonix' account is independent
of Conrad Connect.
If you wish to integrate your smart device
with Conrad Connect you require a separate
Conrad Connect account.
Refer to www.conradconnect.de

- 10 -
App – Landing page
Add new devices
App settings
Account settings
Device list
Show ScenesShow Devices

- 11 -
App – Settings
Press to open app settings:
Language Select app language
Price Select currency
Set the charge for one kWh
Manual Download operating
instructions
About
See app version and available
app updates.
Links to www.conrad.com and
www.conradconnect.de
App – Updates
App software updates are managed as other
apps through the corresponding app store.

- 12 -
Smart devices – Firmware update
The rmware of your smart device is updated
via the app. Available rmware updates are
indicated in the device settings.
For all rmware updates the smart
device and the mobile device that
runs the app must be connected to
the same WLAN network during the
update.
1. Make sure that mobile device and smart
device are connected to the same WLAN
network.
2. Select the device you want to update from
the device list.
3. Touch to open the device settings.
4. Under Firmware Version touch .
5. The rmware of the smart device will be
updated.
6. When the update is complete, will
be shown.

- 13 -
Gateway – Add
During set-up make sure to keep the
mobile device running the app and the
smart device within receiving distance
of the wireless access point.
1. Connect your mobile device running the app
to your WLAN network.
2. Open the app and navigate to the landing
page.
3. Touch if it is not already selected.
4. Touch +.
5. Select the gateway.
6. Follow the on-screen instructions in the app.
7. When you see the conrmation notication,
the gateway appears in the device list.
8. Add more gateways or exit.
It is strongly recommended that you
set up your router or access point
(AP) to use WPA2-Personal with PSK
encryption for authentication.

- 14 -
Gateway – Gateway page
Gateway settings
Modes
Add a new sensor
Back to home
Sensor list

- 15 -
Gateway – Settings
1. Select a gateway from the device list on the
landing page.
2. Press to open the gateway settings.
3. Adjust settings:
Name Give your gateway a name.
Firmware
version
Indicates the rmware version
of the gateway.
Update rmware if updates are
available.
About MAC address and serial number
of gateway
Volume Adjust speaker volume of
gateway.
Reset To
Factory
Settings
Resets the gateway to its
factory default settings.
Refer to section Gateway –
Reset for more information.
Gateway – Speaker volume
The gateway speaker volume is adjustable
to your needs. Open the gateway settings
(Gateway – Settings) and adjust the volume to
your desired level.

- 16 -
Gateway – Indicator light
Indications
Observe the indicator lights during set up and
use of your smart device.
Indication Status/Action
Fast blue ashing
(4 times per sec)
Ready to connect to
network
Stays blue for 5s
then off
Gateway successfully
connected to router
Slow blue ashing
(2 times per sec) Connecting to network
Blue ashing
(4s on / 0.25 off) No Internet connection
Quick green ashing
(4 times per sec)
Ready for sensor
pairing
Stays green for 5s
then off
New sensor
successfully paired
According to app
settings A sensor is triggered

- 17 -
Manual control
The gateway indicator light can be turned on
and off manually. Congure the manual control
as follows:
1. Go to the app landing page.
2. Touch if it is not already selected.
3. Select the gateway from the device list.
4. Touch Night Light Mode.
5. Under the Light section, set color and
brightness of the gateway indicator light.
6. Touch Save.
7. Touch to manually turn the indicator
light on ( ) and off ( ).
■Note that the colour you set here is also
adopted by the Night Light mode. See
chapter Function – Night light mode.
Automated control
Various functions work in conjunction with the
gateway indicator light. Automated indicator
light controls are mentioned throughout the
manual.

- 18 -
Gateway – Reset
Attention! Resetting removes all
conguration data in the gateway and
any linked external sensors.
Option 1
1. Select the gateway from the device list.
2. Touch .
3. Touch Reset To Factory Settings .
4. Conrm the prompt to reset.
5. The device is reset and removed from the
device list.
Option 2
1. Navigate to the landing page.
2. Android: Hold down the gateway in the
device list.
iOS: Slide the gateway to the left in the
device list.
3. Select Delete.
4. Conrm the prompt to reset.
5. The device is reset and removed from the
device list.

- 19 -
Sensors – Sensor types
The gateway itself features the following built-in
sensors:
■Light sensor
■Noise sensor
■Pressure sensor
Other sensors are external sensors, which can
be added and removed again if required.
The gateway sensors cannot be removed.
Sensors – Add sensor
Only sensors compatible with the Sygonix
Home Starter Kit can be added.
1. Turn the external sensor on.
2. Select the gateway from the device list to
which you want to add the sensor.
3. Touch +Add New Sensor.
4. Select the the sensor you want to add.
5. Follow the on-screen instructions.
-Start and end of the procedure are
conrmed by signal sounds.
-If you attempt to add a sensor a second
time, the instructions window does not
close. Touch Cancel to close, then <to
reach the landing page.
6. Wait for the conrmation window, then touch
OK.

- 20 -
7. You will be asked to name the sensor. Enter
a name and conrm.
-If a sensor device comprises more than
one sensor, you will be asked to name
each sensor.
8. Touch <to return to the landing page.
9. The sensor is added to the sensor list.
-A device may be a multiple-in-one sensor.
For such cases, multiple sensors are
added to the sensor device list.
-By default, newly added sensors are
disabled. Go to chapter Sensors – Enable/
disable sensor to learn how to enable/
disable and congure a sensor.
Rename a sensor
1. In the sensor device list, swipe the newly
added sensor left, then touch Edit.
2. Enter a new name for the sensor and
conrm the dialog.