Contec Medical Systems Co. CONTEC08A-VET User manual

80550 / CONTEC08A-VET
M80550-M-Rev.1.06.20
CONTEC MEDICAL SYSTEMS CO., LTD
No.112 Qinhuang West Street, Economic & Technical Development Zone,
Qinhuangdao, Hebei Province, PEOPLE’S REPUBLIC OF CHINA
Made in China
PROFESSIONAL MEDICAL PRODUCTS
Shanghai International Holding Corp. GmbH (Europe)
Eiffestrasse 80, 20537 Hamburg, Germany
Importato da / Imported by / Importé par / Importado por / Importado por:
Gima S.p.A.
Via Marconi, 1 - 20060 Gessate (MI) Italy
[e-mail] - [email protected]
www.gimaitaly.com
SFIGMOMANOMETRO ELETTRONICO VETERINARIO
VET ELECTRONIC SPHYGMOMANOMETER
TENSIOMÈTRE VÉTÉRINAIRE ÉLECTRONIQUE
ESFIGMOMANÓMETRO VETERINARIA ELECTRÓNICO
ESFIGMOMANÔMETRO VETERINÁRIO ELETRÔNICO
95% 1060 hPa
700 hPa
55°C
-20°C 0%

40
Foreword
Please read the User Manual carefully before using this product. The User Manual which describes the operating
procedures should be followed strictly. This manual detailed introduce the steps must be noted when using the product,
operation which may result in abnormal, the risk may cause personal injury and product damage and other contents, refer
to the chapters for details. Any anomalies or personal injury and device damage arising from use, maintain, store do not
follow requirements of the User Manual.
Note: Please read the User Manual carefully before using this product.
Described in this User Manual is in accordance with practical situation of the product. In case of modications and software
upgrades, the information contained in this document is subject to change without notice.
The warning items
Before using this product, you should consider the safety and efcacy of the following described:
• Described each measurement results combined with clinical symptoms by qualied doctors.
• The reliability and operation of using this product whether meets the operation of this manual relate to the maintenance
instructions.
• Do not perform maintenance and service while the device is in use.
Warning: Replace accessories which not provided by our company may lead to the occurrence of errors.
Replace adapters, cuffs or SpO2 probes at will may result in wrong measurement results. Without our company
or other approved maintenance organizations trained service personnel should not try to maintain the product.
ENGLISH

41
Contents
Chapter 1 Safety Precautions ..................................................................................................................................... 43
1.1 Operation for AC Adapter (Separate Sale) ............................................................................................. 45
1.2 Operation for Battery .............................................................................................................................. 45
Chapter 2 Main Unit...................................................................................................................................................... 47
Chapter 3 External Interfaces...................................................................................................................................... 50
Chapter 4 Battery/AC Adapter Installation................................................................................................................. 52
4.1 Battery Installation .................................................................................................................................. 52
4.2 Usage of power adapter ......................................................................................................................... 53
Chapter 5 Button Functions ........................................................................................................................................ 53
Chapter 6 Setting the Date and Time.......................................................................................................................... 54
Chapter 7 About Unit.................................................................................................................................................... 55
Chapter 8 Over-limit Prompt Function ....................................................................................................................... 56
8.1 Physiological parameter over-limit prompt.............................................................................................. 56
8.2 Technical parameter over-limit prompt.................................................................................................... 57
Chapter 9 The Usage Method of Sphygmomanometer............................................................................................. 57
9.1 Accurate Measurement Way................................................................................................................... 57
9.2 Applying the Cuff..................................................................................................................................... 59
9.3 BP Measurement .................................................................................................................................... 60
Chapter 10 Memory Function........................................................................................................................................ 62
10.1 Review Memory Values ........................................................................................................................ 62
10.2 Delete Memory Values.......................................................................................................................... 62
Chapter 11 SpO2 Measurement Function(Optional) ................................................................................................... 63
Chapter 12 SpO2 Measurement Method....................................................................................................................... 66
Chapter 13 Installation of the Software........................................................................................................................ 67
13.1 Demand of Editor.................................................................................................................................. 67
13.2 Installation of Software ......................................................................................................................... 67
Chapter 14 Error Message............................................................................................................................................. 68
Chapter 15 Troubleshooting.......................................................................................................................................... 69
ENGLISH

42
Chapter 16 Keys and Symbols...................................................................................................................................... 70
Chapter 17 Maintenance, Cleaning and Keeping ........................................................................................................ 72
Chapter 18 NIBP Specication...................................................................................................................................... 74
ENGLISH

43
Chapter 1
SAFETY PRECAUTIONS
• In order to use it correctly, please read the “Safety Precautions” carefully before using it.
• Operators do not need professional training, but should use this product after fully understanding the requirements in
this manual.
• To prevent users from suffering damage or loss due to improper use, please refer to “Safety Precautions” and use this
product properly.
Note
If not use correctly, it exists the possibility of damage for personnel and goods.
Good damage means the damage of house, property, domestic animal and pet.
Contraindication
No
Warning
Self-diagnosis and treatment using measured results may be dangerous. Follow the instructions of your physi-
cian.
Please hand measurement results to the doctor who knows animal health and accept diagnosis.
Please do not use for any other purpose except BP measurement.
Otherwise it may cause accident or holdback
Please do not keep the cuff in the over-inated state for a long time.
Otherwise it may cause risk.
Do not use the device in the case of there are ammable anesthetic gasses mixing with the air or nitrous oxide.
Otherwise it may cause risk.
If liquid splashes on the device or accessories, especially when liquids may enter the pipe or device, stop using
and contact the service department.
Otherwise it may cause risk.
ENGLISH

44
Dispose of the packaging material, observing the applicable waste control regulations and keeping it out of chil-
dren’s reach.
Otherwise it may cause harm to the environment or children.
Please use approved accessories for the device and check that the device and accessories are working properly
and safely before use.
Otherwise the measurement result may be inaccurate or an accident may occur.
When the device is accidentally damp, it should be placed in a dry and ventilated place for a period of time to
dissipate moisture.
Otherwise the device may be damaged due to moisture.
Do not store and transport the device outside the specied environment.
Otherwise it may cause measurement error.
It is recommended that you check if there is any damage on the device or the accessories regularly, if you nd any
damage, stop using it, and contact the biomedical engineer of the hospital or our Customer Service immediately.
Do not disassemble, repair and modify the device without permission.
Otherwise it cannot be accurately measured.
This device can not be used on mobile transport platforms.
Otherwise it may cause measurement error.
This device can not be used on a tilted tabletop.
Otherwise there is a risk of falling.
Dispose of packaging materials, waste batteries and end-of-life products in accordance with local laws and reg-
ulations. The end-of-life products and materials are properly disposed of by the user in accordance with the
authority’s decree.
Replace accessories which not provided by our company may lead to the occurrence of errors.
Without our company or other approved maintenance organizations trained service personnel should not try to
maintain the product.
This device can only be used for one test object at a time.
If the small parts on the device are inhaled or swallowed, please consult a doctor promptly.
The device and accessories are processed with allergenic materials. If you are allergic to it , stop using this product.
After pressing the power button, if the device has display fault such as white screen, blurred screen or no display
ENGLISH

45
content, please contact our company.
The device shall comply with the standard IEC 80601-2-30:Particular requirements for basic safety and essential perfor-
mance of automated non-invasive sphygmomanometers.
1.1 Operation for AC Adapter (Separate Sale)
Note
The device can be powered by a power adapter that is a part of the medical electrical system.
Be sure to use the dedicated medical grade power adapter of this device.
Otherwise it may cause trouble
Dedicated power adapter must use AC 100 V~240 V
Otherwise it may cause re or electric shock.
When there is breakage of dedicated power adapter plug or wire, please do not use it.
Otherwise it may cause re or electric shock.
Please do not plug or unplug the adapter on the socket with wet hands.
Otherwise it may cause electric shock or injury.
1.2 Operation for Battery
Note
Please use 4 “AA” size manganese or alkaline batteries, do not use batteries of other types.
Otherwise it may cause re.
New and old batteries, different kinds batteries can not be put off.
Otherwise it may cause battery leakage, heat, rupture, and damage to Electronic Sphygmomanometer.
Please don’t put wrong the positive and negative of battery. When the batteries power exhausts, replace with four
new batteries at the same time.
Please take out the batteries when you do not use the device for a long time(3 months or more).
Otherwise it may cause battery leakage, heat, rupture, and damage to Electronic Sphygmomanometer.
ENGLISH

46
If electrolyte of the batteries immodestly get in your eyes, immediately rinse with plenty of clean water.
It will cause blindness or other hazards, should immediately go to the nearest hospital for treatment.
If electrolyte of the batteries immodestly glues on the skin or the clothes, immediately rinse with plenty of clean
water.
Otherwise it may hurt the skin.
Advice
Do not strike or drop the device;
Do not inate before the cuff wraps around the limbs;
Do not inect the cuff and the air tube forcibly.
Description of functions:
The Sphygmomanometer apply to measure the non-invasive blood pressure and SpO2of animal, uses three-user mode,
each user can store 100 items records of measurement results at most. Each record includes detailed measuring time,
systolic pressure, diastolic pressure, average pressure, pulse rate and record number, etc. With 2.8 inch color LCD screen,
clear interface, the function of data review is complete. User can implement ON/OFF, manual measuring, system setup,
parameters change and other operations with seven buttons which are located on the front panel of the device.
With timing shutdown function, if there is no operation and SpO2measurement, the device will automatically turn off after
2 minutes. With USB interface, Users can send measurement results to PC. Refer to the help or explication of the related
software for specic operation.
Purpose:
The device apply to measure the non-invasive blood pressure and SpO2 (optional) of animal. Record parameter value of
blood pressure to provide the reference for the health care professional.
Warning
You must not perform NIBP measurements on animals with sickle-cell disease or under any condition which the
skin is damaged or expected to be damaged.
For a thrombasthemia animal, it is important to determine whether measurement of the blood pressure shall be
ENGLISH

47
done automatically. The determination should be based on the clinical evaluation.
Ensure that the correct setting and blood pressure cuff are selected when performing measurements on animal. It
may be dangerous for the animal to use an over pressure level.
The device has normal useful life for ve years since the rst electried use. After its normal life, dispose the
device and its accessories according to applicable local regulations about environmental.
Chapter 2
MAIN UNIT
The production is in the package.
Open the package and conrm
whether the production is whole.
ENGLISH
Cuff plug
Cuff air plug jack
Display
Adult cuff
USER SWITCH button
ON/OFF button
START/STOP button
Dry battery
UP/DOWN button
MEMORY button
AC adapter jack
MENU button
USB plug jack

48
Accessories
The sphygmomanometer supports cuffs in a variety of sizes, please choose suited cuff according to the size of the animal.
USB Data Line Software CD User Manual
Optional Accessories
AC adapter
Input: voltage: AC 100 V~240 V
frequency: 50 Hz/60 HZ
Rated current: AC 150 mA
Output: DC 6.0 V±0.2 V 1.0 A
or DC5.0 V±0.2 V 1.0 A
SpO2 probe: Integrated SpO2 probe (Optional)
A. SpO2measurement
Range:0%~100%
Error: 70~100%:±2%;Below 70%:unspecied
Resolution: 1%
ENGLISH

49
Note: because SpO2probe measurements are statistically distributed, only
about two-thirds of SpO2probe measurements can be expected to fall within
±Arms of the value measured by a CO-OXIMETER.
B. B. Pulse rate measurement
Range:30 bpm~250 bpm
Error: ±2 bpm or ±2% (select the larger)
Resolution: 1bpm
C. Optical sensor: red light(wavelength: 660 nm, output power less than 6.65
mW) infrared light(wavelength: 880 nm, output power less than 6.75 mW).
Optical sensors are light-emitting components that affect other medical
devices that use this wavelength range. This information may be useful to
clinicians who perform optical therapy.
D. Error in weak lling condition: SpO2and pulse rate can be shown correctly
when pulse-lling ratio is 0.4%. SpO2 error is ±4%; when measuring range
is 30 bpm~100 bpm, pulse rate error is ±2 bpm; when measuring range is
100 bpm~250 bpm, pulse rate error is ±2%.
Note :
• The optional probe of the Sphygmomanometer is an integrated SpO2probe, the measuring part is integrated with the
probe;
• The service life of the integrated SpO2probe is three years.
Cuff:
There are several suitable cuffs(range of limb circumference,middle of upper limb)
the range of limb circumference is 6-11 cm
the range of limb circumference is 10-19 cm
the range of limb circumference is 18-26 cm
the range of limb circumference is 32-43 cm
ENGLISH

50
Note
• The cuff is a consumable. Calculate by measuring 6 times a day(3 times each morning and evening), the service life of
the cuff is about 1 year.(using our experimental conditions)
• In order to correctly measure blood pressure, please replace the cuff in time.
• If the cuff leaks, please contact our company to buy a new one. The cuff purchased separately does not include the
airway tube plug. When replacing, please do not throw the airway tube plug away, install it on the new cuff.
Note
When the product and accessories described in this manual are about to exceed the period of use, they must be disposed
according to relevant product handling specication. If you want to know more information, please contact our company or
representative organization.
*The device will automatically turn off after two minutes in which there is no operation to the device, even if you forget to
turn the power off.
Chapter 3
EXTERNAL INTERFACES
Note
When removing NIBP cuff, please take plug at the front of the windpipe to pull out.
• Cuff socket( is cuff identier)
Left side
ENGLISH

51
The right side of the device is USB socket and power adapter socket
• USB socket ( is USB identier)
• Power adapter socket ( is power socket identier)
Note
All analog and digital equipment connected to this device must be certied to IEC standards (such as IEC60950:
Information technology equipment-Safety and IEC60601-1: Medical electrical equipment-Safety), and all equip-
ment should be connected to in accordance with the requirement of the valid version of the IEC60601-1-1 system
standard. The person connecting the additional equipment to the signal input and output port is responsible for
whether the system complies with the IEC60601-1 standard.
ENGLISH
Right side

52
Chapter 4
BATTERY/AC ADAPTER INSTALLATION
The product can use battery or AC adapter as power source.
4.1 Battery Installation
1. Demount the battery cover in the direction of the arrow.
2. Install “AA” batteries according to + - polarities.
3. Slide to close the battery cover.
Icon “ ”: the batteries power will exhaust. Replace with four new batteries (the same sort) at the same time. Test while
low power may cause data deviation and other problems.
Turn the unit off before replacing the batteries.
Note
When the battery reaches the end of its life, or if the battery is found to have odor, deformation, discoloration or
distortion, stop using the battery and dispose of the used battery in accordance with local regulations, otherwise
it will cause environmental pollution.
1 2 3
ENGLISH

53
4.2 Usage of power adapter
1. Connect the sphygmomanometer and the power adapter. Insert the power adapter plug into the power adapter socket
on the right side of the device.
2. Please insert the power plug of the adapter into the AC 100 V~240 V socket.
Note
The device can be disconnected from the power supply network by unplugging the adapter plug.
When cut off the power supply, rst cut off the connection of power socket and the regulated power supply, then
cut off the connection of regulated power supply and the sphygmomanometer.
Please be sure to use dedicated medical grade power adapter.
Note
When regulated power supply and batteries are both used at the same time, the battery power will not be con-
sumed.
Switch regulated power supply and battery as power supply when the device is off, otherwise, the device may
shutdown due to power failure.
The device can be used normally after it is turned on, without waiting for the device to be prepared.
Chapter 5
BUTTON FUNCTIONS
All the operations to the Electronic Sphygmomanometer are through the buttons. The names of the buttons are above
them. They are:
• [ON/OFF] ON/OFF button. Press this button to turn on/off the device.
• [START/STOP] Press it to inate the cuff and start a blood pressure measurement. During measuring, press it
to cancel the measurement and deate the cuff.
ENGLISH

54
• At all levels interface, the three buttons correspond respectively with the text prompts
below the LCD screen, pressing any button will carry on the corresponding function,
eg: [MENU] [ENTER] [LIST] [USER] etc.
• Up and down buttons, respectively carry on the functions of moving the cursor up and down, changing the param-
eters and switching the status..
Chapter 6
SETTING THE DATE AND TIME
It is necessary to set date and time after power on.
The Electronic Sphygmomanometer can automatically stores measurement results with date and time.
If batteries power exhausts or removed, the time to stop.
At the moment, please reset date and time.
The Electronic Sphygmomanometer stores measure results of three users automatically, and up to 100 items for every
user. If the date and time are set correctly, the date and time when measuring will be correct in the memory, otherwise it
may not be correct. The results can be uploaded to PC via USB and processed with the PC software.
1. There are two modes of time setting:
(1) When using the Sphygmomanometer for the rst time or after the Sphygmomanometer has been placed without pow-
er supply for a certain time(more than 3 minutes), after power on, there is a prompt of time error on the main interface,
set date and time with [UP], [DOWN] and [ENTER] button.
(2) Press [MENU] button on the main interface to enter system menu, then enter [SYSTEM TIME] item, the current time will
be displayed on the screen. Set date and time with [UP], [DOWN] and [ENTER] button .
2. After setting, select [CONFIRM] option and press [ENTER] button to conrm the setting value. If you do not want to
change the time, select [EXIT] option and press [ENTER] button to return to the previous menu.
ENGLISH

55
Note
The range of year is from 2010 to 2099. When the year reaches 2099, pressing the [UP] button will return to 2010.
Chapter 7
ABOUT UNIT
There are two units: “mmHg” and “kPa”.
The default is: “mmHg”.
Enter the [SYSTEM SETUP] submenu in [SYSTEM MENU], then select [UNIT] option to switch units between “mmHg”
and “kPa”.
ENGLISH

56
Chapter 8
OVER-LIMIT PROMPT FUNCTION
The Sphygmomanometer has two kinds of reminding methods: the technical parameter over-limit prompt and the physio-
logical parameter over-limit prompt.
8.1 Physiological parameter over-limit prompt
The sphygmomanometer has the function of over-limit prompt, the user can press [MENU] button to enter system menu,
select [PROMPT SETUP] option to enter its interface, then set the limit value of blood pressure. When the BP measurement
result is higher than the high limit or lower than the low limit and the prompt is ON, the physiological prompt will occur; in
[PROMPT SETUP] interface, select [SpO2PROMPT] option to enter its interface, when the SpO2measurement result is
higher than the high limit or lower than the low limit and the prompt is ON, the physiological prompt will occur.
In the state of physiological prompt, press any button to cancel the prompt and it does not affect the next prompt; the
prompt can be closed permanently with prompt switch of the prompt setup menu until the prompt switch be opened again.
ENGLISH

57
8.2 Technical parameter over-limit prompt
When power is about to exhaust and prompt is ON, the prompt will occur. This prompt can not be canceled unless being
closed or the power replaced.
Chapter 9
THE USAGE METHOD OF SPHYGMOMANOMETER
9.1 Accurate Measurement Way
The limb chosen for taking the measurement should be placed at the same level as the animal’s heart. If this is not possible
you should apply the following corrections to the measured values: If the cuff is placed higher than the heart level, add 0.75
mmHg for each inch of difference. If it is placed lower than the heart level, deduct 0.75 mmHg for each inch of difference.
Advice
Try to measure your animal’s blood pressure at the same time each day with the same limbs and the same pose
for consistency.
Do not touch Electronic Sphygmomanometer, cuff and windpipe during measurement.
Measurements should be taken in a quiet place and the body relax.
Remain still 4~5 minutes before measurement.
Do not bark or move during the measurement,Relax the body, do not let the muscle activity.
Wait 4~5 minutes between measurements.
Do not use precision instruments near the Sphygmomanometer.
Please use the sphygmomanometer at an environment of suitable temperature and humidity(refer to Chapter 18, otherwise
it will cause measurement error.
Warning
When repeatedly measuring, the accurate blood pressure value may not be measured due to congestion in the limbs.
Please measure after the blood ow is smooth.
ENGLISH

58
Repeated measurement for a long period of time, limbs rubbing with the cuff may be accompanied by purpura, ischemia
and nerve damage. When measurement a animal, it is necessary to frequently check the color, warmth and sensitivity of
the distal of the limb. Once any abnormalities are observed, place the cuff in another position or stop the blood pressure
measurement immediately.
Do not twist or wrap the airway tube. It can cause constant pressure in the cuff which can block blood ow and cause
serious damage to the animal.
Do not use the cuff in the area where the treatment is being performed inside blood vessel or the arteriovenous connection.
This may cause temporary blockage of blood ow and cause injury to the patient.
Do not use the cuff on the side of the mastectomy.
When using the cuff to pressurize, some of the body’s functions may temporarily weaken. Use the measurement medical
electrical equipment at the appropriate limbs position.
The device need to be placed for 2 hours from the minimum storage temperature to being ready for its intended use.
The device need to be placed for 4 hours from the highest storage temperature to being ready for its intended use.
Note
The following conditions may also cause changes in the blood pressure measurement value.
When measuring, the patient is nervous, excited, emotional instability;
The room temperature rise or fall sharply, or the environment of measurement often changes;
Measuring in a moving vehicle;
The high and low location of cuff will cause changes in measurement results;
Continuous measurement for a long time.
ENGLISH