Contec BX-825D Series User manual

1BX-825D Series
BX-825D Series
Product Guide
CONTEC CO., LTD.
Thank you for purchasing the CONTEC product. The product consists of the items listed below.
Check, with the following list, that your package is complete. If you discover damaged or missing
items, contact your retailer.
Product Configuration List
BX-825D-DC760000
[Base Model]
BX-825D-DC76xxxx *1
[OS Pre-install Model]
Name
Pcs.
Pcs.
The main body
1
1
CFast card removal prevention fitting
1
1
USB removal prevention fitting
1
1
USB / Displayport removal prevention
fitting
1
1
Cable Tie
2
2
DVI-analog RGB conversion adapter
1
1
Washer assembled screw (M3 x 6)
3
3
Washer assembled and cross recessed
hexagonal bolt (M4 x 10, black)
4 4
Power supply
connector complete set
Power connector
1
1
Contact
4
4
Product Guide(this sheet)
1
1
IPC Precaution List
1
1
Warranty Certificate
1
1
Serial Number Label
1
1
Royalty consent contract (For OS)
- *2
1
Setup Procedure Document
- *2
1
Recovery Media Set
- *2
1
*1 Except for base model.
*2 It is not packed to the base model.
* The User’s Guide of this product is offered as the PDF file in our web page. With it, since information such as a
setup of hardware, each component function and BIOS setup is indicated, please refer to it if needed.

BX-825D Series Product Guide
BX-825D Series 2
Product Configuration Image
* See the Product Configuration List to check if all the components are included for the specified number of units.
Option Available
We have option products, such as a silicon disc, CFast card, and AC adapter.
The more details information about option should look at Web.
Limited One Year Warranty
CONTEC products are warranted by CONTEC to be free from defects in material and workmanship for up to one
year from the date of purchase by the original purchaser.
Replacement or repair will be free of charge only when this device is returned to CONTEC freight prepaid with an
original invoice.
This warranty is not applicable for scratches or normal wear, but only for the electronic circuitry and original
products. The warranty is not applicable if the device has been tampered with or damaged through abuse,
mistreatment, neglect, or unreasonable use, or if the original invoice is not included, in which case repairs will be
considered beyond the warranty policy. If a replacement with a new device is needed, regular factory prices will be
charged, the product will be returned to you COD, and no other written warranty will apply.
The obligation of the warrantor is solely to repair or replace the product. In no event will the warrantor be liable for
any incidental or consequential damages due to such defect or consequences that arise from inexperienced usage,
misuse, or malfunction of this device.
Royalty consent
contract (For OS) Setup Procedure Document
CFast card removal
prevention fitting
Serial Number Label
Warranty Certificate
Recovery Media Set
IPC Precaution ListProduct Guide
Washer assembled and
cross recessed hexagonal bolt
(M4 x 10, black)
USB removal
prevention fitting
Washer assembled
screw (M3 x 6)
The main body
Cable Tie
Product
Guide
IPC
Precaution
List
Warranty
Certificate
XXXXXXXXXXXXX
XXXXXXXXXXXXX
Royalty
consent
contract
USB / Displayport removal
prevention fitting
Power connector
Contact
Power supplyconnector
complete set
Setup
Procedure
Document
DVI-analog RGB
conversion adapter

BX-825D Series Product Guide
3BX-825D Series
How to Obtain Service
For replacement or repair, return the device freight prepaid, with a copy of the original invoice. Please obtain a
Return Merchandise Authorization number (RMA) from our Sales Administration Department before returning any
product. No Product will be accepted without an RMA number.
About the handling of the battery and the storage battery in E U
signatory
Note: This symbol mark is for EU countries only.
This symbol mark is according to the directive 2006/66/EC Article 20
Information for end-users and Annex II.
This symbol means that batteries and accumulators, at their end-of-life, should be disposed of separately from your
household waste.
If a chemical symbol is printed beneath the symbol shown above, this chemical symbol means that the battery or
accumulator contains a heavy metal at a certain concentration.
This will be indicated as follows:
Hg: mercury (0.0005%), Cd: cadmium (0.002%), Pb: lead (0.004%)
These ingredients may cause serious hazardous for human and the global environment.
Please refer to the user's manual for the annulment of detaching a detailed battery specification and the battery and
the batteries.

BX-825D Series Product Guide
Copyright 2018 CONTEC CO., LTD. All Rights Reserved.
CONTEC CO., LTD.June 2018 Edition
3-9-31, Himesato, Nishiyodogawa-ku, Osaka 555-0025, Japan
https://www.contec.com/
NA06017 (LYVS092)
06062018_rev2 [01262018]
No part of this document may be copied or reproduced in any form by any means without prior written
consent of CONTEC CO., LTD.