ConvaTec Natura User manual

Natura™ Accordion Flange with
ConvaTec Moldable Technology™
Accordion Flange application
1
Applying pouch
2
Separate the sides of the pouch to
allow some air to enter the pouch.
PULL UP accordion flange and
hold it with thumbs on top and
fingers underneath. Line up
flanges of pouch and skin barrier.
Start at bottom and apply
pressure completely around
the flanges until the pouch
and flange are snapped
completely together.
Refer to package insert for complete instructions.
There is a clear release liner on back of
skin barrier: DO NOT REMOVE YET.
Roll and mold the moldable adhesive to
the size of the stoma. Do not stretch,
pull or cut. Pinch into place once
desired size is reached.
Remove release liner and center
the opening over the stoma
and apply to clean, dry skin.
Place accordion flange on body.
Push the rolled adhesive toward
to stoma to ensure a close fit.
Remove the white release paper
from the tape collar and press
against the skin. Smooth tape
collar and hold skin barrier in
place for about 30 seconds.

™ indicates trademarks of ConvaTec Inc. Natura and InvisiClose are registered trademarks in the United States.
© 2014 ConvaTec Inc. AP-014408-MM
Find out More 1-800-422-8811 Monday – Friday 8:30 am – 7:00 pm www.ConvaTec.com
For InvisiClose™tail closure:
Closing, emptying and removing pouch
3
Notes:
14. Closing the pouch - 2.
18. Emptying the pouch - 1.
15. Closing the pouch - 3.
17. Pocket - 2.
21. Remove the pouch.
16. Pocket - 1.
19. Emptying the pouch - 2. 20. Emptying the pouch - 3.
13. Closing the pouch - 1.
To close the pouch, fold the end up towards you 3 times until interlocking closures line up. Keep a small amount of air in the
pouch. Press and pinch across the entire closure to secure.
14. Closing the pouch - 2.
18. Emptying the pouch - 1.
15. Closing the pouch - 3.
17. Pocket - 2.
21. Remove the pouch.
16. Pocket - 1.
19. Emptying the pouch - 2. 20. Emptying the pouch - 3.
13. Closing the pouch - 1.
14. Closing the pouch - 2.
18. Emptying the pouch - 1.
15. Closing the pouch - 3.
17. Pocket - 2.
21. Remove the pouch.
16. Pocket - 1.
19. Emptying the pouch - 2. 20. Emptying the pouch - 3.
13. Closing the pouch - 1.
14. Closing the pouch - 2.
18. Emptying the pouch - 1.
15. Closing the pouch - 3.
17. Pocket - 2.
21. Remove the pouch.
16. Pocket - 1.
19. Emptying the pouch - 2. 20. Emptying the pouch - 3.
13. Closing the pouch - 1.
14. Closing the pouch - 2.
18. Emptying the pouch - 1.
15. Closing the pouch - 3.
17. Pocket - 2.
21. Remove the pouch.
16. Pocket - 1.
19. Emptying the pouch - 2. 20. Emptying the pouch - 3.
13. Closing the pouch - 1.
Turn the Lock-it-Pocket™inside-out to tuck tail inside.
14. Closing the pouch - 2.
18. Emptying the pouch - 1.
15. Closing the pouch - 3.
17. Pocket - 2.
21. Remove the pouch.
16. Pocket - 1.
19. Emptying the pouch - 2. 20. Emptying the pouch - 3.
13. Closing the pouch - 1.
To empty pouch, tilt tail up towards the body. Peel open the closure and
unravel tail. For easier opening, push sides together.
14. Closing the pouch - 2.
18. Emptying the pouch - 1.
15. Closing the pouch - 3.
17. Pocket - 2.
21. Remove the pouch.
16. Pocket - 1.
19. Emptying the pouch - 2. 20. Emptying the pouch - 3.
13. Closing the pouch - 1.
To remove the pouch from the
flange, hold the flange down
gently with one hand and gently
un-snap the pouch.
Natura™ Accordion Flange with
ConvaTec Moldable Technology™