Converters.TV KDV 1000 User manual

PAL and NTSC to PAL and NTSC
Converter (Multisystem)
KDV 1000
O eration Manual
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

Introduction
This unit is used for quality video conversion and duplication, and converts signals from
NTSC, PAL or SECAM to NTSC, PAL or SECAM. It can be used to convert PAL tapes
to NTSC and NTSC tapes to PAL. The S-Video function also allows conversion of high
quality video signals from DVD or mini-DV Camcorders. It can convert TV signals from
a local tuner such as a cable box, VCR or satellite receiver, which allows for PAL TV to
be used in a NTSC country, or an NTSC TV to be used in a PAL/SECAM country.
Precautions
1. Do not expose this product to direct sunlight.
2. Keep the unit away from radiator, heat sources and magnetic field.
3. Do not place it in very dusty or humid locations.
4. Use this unit in a horizontal position only.
5. Do not put heavy objects on top of the converter.
6. Put the unit in an open space that has good ventilation.
7. If the unit is acting abnormally keep the unit away from TV or other electronic
equipment.
8. Unplug the unit from the power supply when it is not to be used for a long period
of time.
Features
•Field memory speed 40MHz.
•Crisp and clear converted video signals.
•Composite in/out and S-Video in /out.
•Input signals of NTSC 3.58 / NTSC 4.43, PAL, PAL M/N or SECAM can be
converted to either NTSC 3.58 / NTSC 4.43, PAL, PAL M/N or SECAM.
•Input signal can be set manually or automatically.
•Built-in automatic gain control ensures 1 Vp-p output signal to optimise video
quality.
•Built-in Time Base Correction function for signal synchronisation.
•Variable auto switching power supply gives undisturbed power to the converter as
long as input voltage is between 85-265 Volts 50-60 hertz.
•Soft button can be used to haze sharp pixilation on screen display.
•Power Supply: DC 5V 1.2A Center positive.
•Power Consumption: 4 .
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

O eration controls and functions
To View
1. In ut switch- This button is used to switch the input signal. You may choose one
of the following input signals- S-Video input, NTSC, PAL, PAL M/N, SECAM
or Auto.
2. Soft switch- this button is used to haze sharp pixelation on screen display.
3. Out ut switch- this button is used to switch the output signal. You may choose
one of the following output signals- NTSC, PAL M/N or SECAM.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

Rear Panel
In ut:
1. Video-In- This is the video input port. A composite RCA video connector should
be used when connecting the Video-In port to your input device.
2. S-Video-In- This is the S-Video input port. An S-Video 4-pin mini Din connector
should be used when connecting the S-Video-In port to your input device.
Out ut:
3. Video-Out- This is the video output port. A composite RCA video connector
should be used when connecting the Video-Out port to your output device.
4. S-Video-Out- This is the S-Video output port. An S-Video 4-pin mini Din
connector should be used when connecting the S-Video-Out port to your output
device.
5. Power- DC 5V- This is the AC adaptor port. It is to be used with the power pack
supplied.
Connection and Installation
The AC adaptor power unit should not be plugged into a wall outlet until all connections
are complete.
- Using your connector cable connect the output port (Number 3/4 on the rear panel) to
the output device. The output either being Video or S-Video.
- Using your connector cable connect the input port (Number 1/2 on the rear panel) to
the input device. The input either being Video or S-Video.
Once all connections are complete please connect the power supply provided to the
power socket.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

S ecifications
Video In ut Composite video RCA connector
S-Video In ut S-Video 4-pin mini Din connector
Power DC 5V 1.2A Center Positive
Video Out ut Composite video RCA connector
S-Video Out ut S-Video 4-pin mini Din connector
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv