Converters.TV CM-331 User manual

NTSC/PAL to VGA Convertor
Converter with PC and Audio
Bypass (CM-33 )
Operation Manual
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

Introduction
This unit automatically converts any video signal (NTSC, PAL or SECAM) into a high
resolution VGA signal.
Precautions
1. Do not expose this product to direct sunlight.
2. Keep the unit away from radiator, heat sources and magnetic field.
3. Do not place it in very dusty or humid locations.
4. Use this unit in a horizontal position only.
5. Do not put heavy objects on top of the converter.
6. Put the unit in an open space that has good ventilation.
7. If the unit is acting abnormally keep the unit away from TV or other electronic
equipment.
8. Unplug the unit from the power supply when it is not to be used for a long period
of time.
Features
•Operates in NTSC 3.58, NTSC 4.43, PAL, PAL M, PAL N, or SECAM
automatically.
•Superior VGA quality.
•Adjustable control on Color, Brightness, Contrast and Tint.
•Plug & Play - No software driver required.
•On Screen Display (OSD) adjustment.
•Stereo audio input and output.
•Bypassed PC output saves the work of re-plugging when changing source
between video and PC inputs.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

Operation controls and functions
Front Panel
. Power ON indicator- The indicator will light up when the power is on.
2. Power ON/OFF button- This is the button used to turn on or off the unit.
3. Input button- Pressing the button allows for manual selection of 2 input sources
and then by passed PC source signal is chosen. Repeatedly pressing the input
button toggles through the available inputs from PC, S-Video or Composite-
Video.
4. Menu button-It is capable of adjusting various signal parameters of the incoming
Composite or S-Video.
Repeatedly pressing the menu button toggles through the available adjustments,
as indicated on screen display. Those adjustment controls include- brightness,
contrast, colour and tint.
5. +/- Buttons- Pressing the + button increases the value of each adjustment control
selected, e.g. by pressing the + button you may choose to increase the level of
picture brightness.
Pressing the – button decreases the value of the adjustment control selected.
•NOTE-1. The settings are automatically saved after adjustment.
2. These adjustments have no effect on the incoming computer signal,
which is simply passed through the unit.
3. Press + and – buttons together in order to return to default values.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

Rear Panel
. DC- 7.5V- This is the power supply input port.
2. V-In- This is the Composite Video input port.
3. S-In- This is the S-Video input port.
4. PC In- This is the PC input port. Connect the computers VGA output signal to the
HD 15 connector PC input port.
5. PC Out- This is the PC output port. Connect the RGBHV output to the
destination computer monitor or other display device via HD 15 connector PC
Output port.
6. V-L/V-R Audio Input- This is the stereo audio input for V-In video source.
7. S-L/S-R Audio Input- This is the stereo audio input for S-In video source.
8. PC Audio Input- This is the audio input for video source.
9. Audio Output- This is the audio output to amplifier.
Connection and Installation
The AC adaptor power unit should not be plugged into a wall outlet until all connections
are complete.
-Connect the Audio amplifier into the audio output port (Number 9 on rear panel).
-Connect your audio input video source (PC/Notebook/Mac) into the PC input port
(Number 8 on the rear panel).
-Connect your audio input video source (either Composite Video or S-Video) into
either the V-L/V-R or S-L/S-R input ports (Number 6/7 on the rear panel).
-Connect the computers VGA output signal to the HD 15 connector PC input port
(Number 5 on rear panel).
-Connect the RGBHV output to the destination computer monitor or other display
device via HD 15 connector PC Output port (Number 4 on rear panel).
-Connect your Composite Video/S-Video input device to the V-In/S-In port (Number
2/3 on rear panel).
Once all connections are complete, switch the power button ON and please connect the
power supply provided to the power socket.
NOTE - this model does not work with LCD Panels.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

Specifications
Input Signal 1 x Composite Video: 1 Vp-p 75 ohm RCA
jack.
1 x S-Video: Y/C in, 4 Pin Din connector.
1 x VGA: 0.7 Vp-p RGB, 15 Pin D-Sub
connector.
1 x S Audio (R, L)
1 x V Audio (R, L)
1 x PC Audio
Output Signal 1 x VGA: 0.7 Vp-p RGB, 15 Pin D-Sub
connector.
1 x Audio: 47k ohm 350m Vrms phone
jack.
Power Supply DC 7.5V 300mA Center positive
Dimensions 290 ( ) x 145 (D) 50 (H) mm
Accessory AC adaptor, one set of video RCA cable,
one set of audio RCA cable.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv