Converters.TV 3G SDI to HDMI Converter User manual

3G SDI to HDMI Converter
- ID# 857
Operation Manual

Introduction
The SDI to HDMI converter allows SD-SDI, HD-SDI and 3G-SDI signals to be
shown on HDMI/SDI displays while ensuring high bit rates o 2.970 Gbit/s
to give you ast signal transmission without any loss. For pro essionals this
means that it is now easier to distribute and extend your 3G SDI signal
while giving you the ability to display your work on HDMI displays thanks
to the built in HDMI converter. Furthermore, thanks to the loop-through
3G-SDI design, users are able to enjoy both SDI and HDMI displays at the
same time.
Features
• Operation at 2.970Gbit/s, 2.970/1.001Gbit/s, 1.485Gbit/s, 1.485/1.001Gbit/s
and 270Mbits/s
• Supports SMPTE 425M (Level A and Level B), SMPTE 424M, SMPTE 292M, SMPTE
259M-C
• Equalized and re-clocked loop output
• Integrated audio de-embedder or a maximum o 8 channel, 48 kHz audio
• Auto video mode detection (3G/SD/HD)
• Conversion rom SMPTE 425M level B to Level A 1080p 50/59.94/60 4:2:2 10-bit
• Connect with other units to extend your signal over long distances
• Simultaneous display with SDI and HDMI signals
• Supports signal transmission distances o up to 300M or SDI signals, 200M or
HD signals and 100M or 3G signals
Note: Cable tested with Belden 1694A. Operating distances may vary i used
with another type o cable.
Applications
• Connect to multiple displays by linking one 3G SDI Extender to another through
its SDI output port. When connected to another 3G SDI Extender, you can
broadcast a signal to two HDMI displays and one SDI display, or connect to
another Extender to provide more connections and a longer operating distance.
• Convert 3G SDI to HDMI
System
Requirements
Input broadcast video with an SDI cable and output to SDI and/or HDMI
displays with included connection cables.

Operation Controls
and Functions
Front Panel
1 Power LED: This red LED will switch on when the device is connected
with the power supply.
2. Video Lock LED: This green LED will turn on when both the input SDI
source and the output HDMI display have sent and received a signal.
. Audio Lock LED: This green LED will switch on when the input SDI source
has an audio signal and when the output HDMI/DVI display activates.
4. HDMI/DVI LED: This green LED will turn on when connected to an HDMI
display and will not switch on when connected to a DVI display. The
device will read the output display’s EDID to determine whether to send
an HDMI or DVI signal.
5. 3G LED: This yellow LED will turn on when the input SDI signal is 3G.
6. HD LED: This yellow LED will switch on when the input SDI signal is HD.
7. SD LED: This yellow LED will turn on when the input SDI signal is SD.
8. Audio out R/L: These slots are where you connect an ampli ier with a
RCA jack to, in order to transmit an audio signal.
9. HDMI Out: This slot is where you connect a HDMI / DVI display with a
HDMI or HDMI to DVI cable to.
Rear Panel
1. SDI IN: This slot is where you connect the SDI source to, in order to send
a SDI signal to a display.
2. SDI OU : This slot is where you connect the SDI display to, with an SDI
cable or displaying images. Connect it to another SDI to HDMI
converter/ extender to extend your signal or connect to multiple
displays.

. DC 5V: Plug the 5V DC power supply into the unit and connect the
adaptor to an AC outlet. The red LED will turn on when the power is on.
Specifications
SMP E Standard 425M Level A & B, 424M, 292M, 259M-C
SDI ransmission Rates 2.970 Gbit/s and 2.970/1.001 Gbit/s
Frequency Bandwidth 225MHz/link (HDMI 1.3)
Input Port 1 x BNC (SDI/HD-SDI/3G-SDI)
Output Port 1 x BNC (SDI/HD-SDI/3G-SDI),
1 x HDMI, 2 x RCA Jack
Video Supports 480i, 576i, HD-SDI-720p, 1080i, 3G-SDI-1080p
Power Supply 5V DC/ 2.6A (US/EU standards, CE/FCC/UL
certi ied)
ESD Protection Human body model:
±8kV (air-gap discharge)
±4kV (contact discharge)
SDI Cable Distance 3G up to 100M (BELDEN 1694A)
HD up to 200M (BELDEN 1694A)
SD up to 300M (BELDEN 1694A)
Dimension (mm) 137(W) x 90(D) x 25(H)
Weight (g) 225
Chassis Material Aluminum
Silkscreen Color Black
Operating emperature 0°C ~ 40°C / 32°F ~ 104°F
Storage emperature -20°C~60°C / -4°F ~ 104°F
Relative Humidity 20 ~ 90% RH (Non-condensing)
Power Consumption (W) 4
Connection