Converters.TV CDM-660 User manual

PAL to NTSC (NTSC to PAL)
Digital Multisystem converter
(CDM-660)
O eration Manual
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

Introduction
This unit can convert video signals from NTSC, PAL, or SECAM to NTSC or PAL. This
Multisystem converter is suitable for home applications.
Precautions
1. Do not expose this product to direct sunlight.
2. Keep the unit away from radiator, heat sources and magnetic field.
3. Do not place it in very dusty or humid locations.
4. Use this unit in a horizontal position only.
5. Do not put heavy objects on top of the converter.
6. Put the unit in an open space that has good ventilation.
7. If the unit is acting abnormally keep the unit away from TV or other electronic
equipment.
8. Unplug the unit from the power supply when it is not to be used for a long period
of time.
Features
•Includes a built in colour bar.
•Input auto detecting.
•Digital conversion from input TV signals of NTSC, N4, PAL, PAL M, PAL N or
SECAM to output signals of NTSC or PAL.
•Full digital processing. Digital Line (525-625 lines) and field (60 input-50 field).
•6M-bit field memory.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

O eration Controls and Functions
Front Panel
1. In ut Select:
-S-In- This will illuminate when S-In is selected.
-V-In- This will illuminate when V-In is selected.
2. In ut System
-SECAM- This will illuminate when the input system is SECAM.
-PAL- This will illuminate when the input system is PAL.
-PAL M- This will illuminate when the input system is PAL M.
-PAL N- This will illuminate when the input system is PAL N.
-NTSC 4.43- This will illuminate when the input system is NTSC 4.43.
-NTSC 3.58- This will illuminate when the input system is NTSC 3.58.
3. Out ut System
-PAL- This will illuminate when the output system is PAL.
-NTSC- This will illuminate when the output system is NTSC.
Rear Panel
1. Out ut system select switch- Set the switch to the type of signal you wish to
output. You may either choose to output NTSC or PAL.
2. Video Out ut- Connect your output device to the Video output port using a
composite RCA connector cable.
3. S-Video Out ut- Connect your output device to the S-Video output port using a 4-
pin mini Din connector cable.
4. In ut signals select switch- Set the switch to select either Video-In or S-Video-In.
5. Video In ut- Connect your input device to the Video input port using a composite
RCA connector cable.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

6. S-Video In ut- Connect your input device to the S-Video input port using a 4-pin
mini Din connector cable.
7. DC Power su ly In ut- This is the power supply adaptor port. It is to be used with
the power pack supplied.
Connection and Installation
The AC adaptor power unit should not be plugged into a wall outlet until all connections
are complete.
- Using your connector cable connect the output (Number 2/3 on Rear panel) to your
output device (NTSC or PAL Video Recorder). Output being either Video or S-
Video.
- Using your connector cable connect your input (Number 5/6 on Rear panel) to the
input device (Video cassette recorder either- PAL, NTSC or SECAM, satellite
receiver or a camcorder). Input being either Video or S-Video.
Once all connections are complete please connect the power supply provided to the
power socket (number 7 on rear panel).
S ecifications
In ut systems NTSC, N4, Pal, PAL M, PAL N, SECAM
Out ut TV systems NTSC 3.58, PAL
Connection terminals Video Input: 1 S Input: 1
Video Output: 1 S Output:1
Sam ling frequency Y: 13.5 MHz
R-Y: 6.75 MHz
B-Y: 6.75 MHz
Digital Code bit R: 8 bits
G: 8 bits
B: 8 bits
Line 525-625
Field 60-50
Power DC 9V 500mA Center negative
Dimensions 236 ( ) x 130 (D) x 45 (H) mm
Weight 400 g
Accessory One set of video cables, AC adaptor
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv