Converters.TV CDM-630 User manual

PAL to NTSC (NTSC to PAL)
Universal Digital Video Format
Converter
(CDM-63 )
Operation Manual
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

Introduction
This unit is compact and allows you to covert any video system into any other video
system. (French SECAM excluded).
Precautions
1. Do not expose this product to direct sunlight.
2. Keep the unit away from radiator, heat sources and magnetic field.
3. Do not place it in very dusty or humid locations.
4. Use this unit in a horizontal position only.
5. Do not put heavy objects on top of the converter.
6. Put the unit in an open space that has good ventilation.
7. If the unit is acting abnormally keep the unit away from TV or other electronic
equipment.
8. Unplug the unit from the power supply when it is not to be used for a long period
of time.
Features
•Allows for input system auto detecting.
•SMT Technology ensures high reliability and durability.
•Built-in Time Base Correction (T.B.C.) function for signal synchronisation.
•The unit will automatically send out a colour bar picture when there is no video
signal present on the input.
•Full digital decoding (digital comb filter) and encoding.
•4M-bit field memory.
•Input level ranges from 0.5 Vp-p to 2 Vp-p.
•Built-in Automatic Gain Control (A.G.C.) function ensures 1 Vp-p output signal.
•It is compact and easy to carry.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

Operation controls and functions
Top View
•Video input system indicator: AUTO, SECAM, PAL N, PAL M, PAL N4, N
1. Illuminates when input auto detection mode is selected.
2. Illuminates when input system is set to SECAM.
3. Illuminates when input system is set to PAL N.
4. Illuminates when input system is set to PAL M.
5. Illuminates when input system is set to PAL.
6. Illuminates when input system is set to N4.
7. Illuminates when input system is set to N.
* NOTE- when in auto detection mode one of the system indicators will also illuminate
to show video system of the input.
•Video output system indicator: PAL N, PAL M, PAL, N4, N
1. Illuminates when output system is set to PAL N.
2. Illuminates when output system is set to PAL M.
3. Illuminates when output system is set to PAL
4. Illuminates when output system is set to N4
5. Illuminates when output system is set to N
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

•Input system select button
Each depression of the button steps through a series of video systems and auto
detection mode. These range from Auto, N3, N4, PAL, PAL M, PAL N and SECAM.
•Output system select button
Each depression of the button steps through a series of video systems. These range
from N3, N4, PAL, PAL M and PAL N.
Rear Panel
1. Input- This is the video input port. Connect this to your input device using a
composite RCA connector cable.
2. Power- This is the power supply input port. It is to be used with the power pack
supplied.
3. Output- This is the video output port. Connect this to your output device using a
composite RCA connector cable.
Connection and Installation
The AC adaptor power unit should not be plugged into a wall outlet until all connections
are complete.
- Using your connector cable connect the output port (Number 3 on the rear panel) to
the output device (Video, TV).
- Using your connector cable connect the input port (Number 1 on the rear panel) to the
input device (video, satellite receiver, camcorder).
- Select the video input system; you may select AUTO, N3, N4, PAL, PAL M, PAL N
or SECAM. hen an input signal has been chosen, the indicator will light up.
- Select the video output system; you may select N3, N4, PAL, PAL M or PAL N.
hen an output signal has been chosen, the indicator will light up.
Once all connections are complete please connect the power supply provided to the
power socket.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

Specifications
Input connection terminal 1 x Video
Output connection terminal 1 x Video
Input TV systems NTSC 3.58, NTSC 4.43, PAL (M,N),
SECAM
Output TV systems NTSC 3.58, PAL (M,N)
Sampling frequency Y:13.5 MHz 8bits R-Y:6.5 MHz 8bits B-
Y:6.5 MHz 8 bits
Line conversion 525 to 625 lines and vice versa
Field conversion 60 to 50 fields and vice versa
Power Supply DC 15V 600mA Center negative
Dimensions 145 ( )mm X 95(D)mm X 34(H)mm
Weight 1.0 Kg
Accessory One set of video cable, AC adaptor
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv