Converters.TV 15200 User manual

Multiformat Video to USB HD
Capture Box - ID# 15200
Operation Manual

Introduction
The Multi Format Video to USB HD Capture Box is High Definition capture box supports HDMI
080p video/component/SV/CVinput and record to H.264 video format. Its low power
consumption and superior video processing capabilities make it ideal for integration into high-
end portable and desk top PC products
System
Requirement
In order to run the application smoothly, please refer to the following
hardware recommendation.
•System Hardware Requirements:
2.4 GHz single core CPU with at least GB RAM for optimal performance
•Operating Systems:
Windows 2K SP4
Windows XP Home or Professional 32 bits SP2
Windows Vista 32 bits
Windows 7 32 bits
•USB Port Extension:
An available USB 2.0 port with USB to mini USB cable
Features
•FullHD capture HDMI/COMP/SV/CV to USB
•H.264/MPEG4-AVC High Definition encoder
•Video input supports: 920 x 080i/p, 280 x 720p, 576i/p, 720 x 480i/p
•Supports MPEG-4 Advanced Audio Coding (AAC)
•48 KHz audio sampling frequencies
•It use USB bus power for low power consumption
Applications
•Displaying HD signal on PC or NB’s monitor

Operation Controls
and Functions
Front anel
1. COMP/SV/CV IN
This slot is to connect with Composite video/S-Video/Component video input source equipment
such as Set-Top-Box or DVD with 8 pins cable.
2. HDMI IN
This slot is where you plug your input source equipment with HDMI cable for input signal
sending.
3. AUDIO IN
This slot is to connect with audio input source equipment such as DVD with 3.5mm audio cable
Back anel
1. USB
This slot is where you plug the mini USB cable and connect it to the PC/NB for data upstream
and power.
2. Power LED
This LED will illuminate when the device is connected.
Installation
The following sections list the procedures to follow when installing the HDMI/COMP/SV/CV to
USB Full HD Capture. Please follow the step accordingly to launch the installation successfully.

Hardware
Installation
Connect the HDMI to USB Full HD Capture to NB/PC with mini USB to USB type A cable and
the LED will illuminate in green with a Found New Hardware message from NB/PC desk screen
A Wizard dialogue will appear, click” Yes”, and click “Next” to continue the installation
Insert the CD driver included in the package now and tick on “Install the software
automatically” then click “Next”.

Another dialogue will appear as below. Tick “Search” and click on “Next” to continuing the
installation.

Allowing the Wizard to search and find the proper installation file for a while and click “Finish” to
co plete the installation.
Software Installationon
Download “DivXInstaller.exe” fro the website: http://www.divx.co /en/software/divx-plus and
click on the “FREE DOWNLOAD” to install it.
Run and click the “AUTORUN.EXE” in your CD root directory and click on PL 330 to install.
The setup dialogue of L330 will appear, click “Next” to continue the setup.

Allowing the setup to process for few o ents and select a destination location for saving the
PL 330’s folder. Users are free to set the destination location and it is reco ended to save it
under the easy finding place.

Click “Install” to confirm the installation.

Click “Finish” again to co plete the PL330’s installation.
Then click on Exit to finish the installation.
Cypress PL330’s icon should appear on the desk
Double click on the Cypress PL330 to set the configuration of HDMI to USB FullHD Capture.

Select CUSB-603 and click on “OK”.
Select your AV syste of NTSC or PAL, language and Video type then click on “OK”
A DVR player will appear on the screen

DVR anel’s Functions
1 Power
Click this button to exit the application.
2 Minimize
Click this button to minimize the control panel.
3 Record
Click this button to save the video file.
4 Play
Click this button to play the video file from the recorded file.
5 Pause
Click this button to pause the video.
6 Vol up
Click this button to volume up the sound.
7 Vol down
Click this button to volume down the sound.
8 Source
Click this button to select the source input from the DVD/TV input connection.
9 Video Setup
Click this button to set the video and audio’s parameter. A dialogue will appear as
below, please set the parameter accordingly

10 Save Clipboard
Click this button to copy the image for other DDE application.
11 Mute
Click this button to mute the audio.
12 Snapshot BMP
Click this button to save the still image as the BM or J EG file.
13 Help
Click this button to enable the online help tool.

Specifications
Input port 1x HDMI
Output port 1 x USB
ower Supply 5V/500m A DC USB bus
Dimensions 121 mm (W) × 21.6 mm (D) × 65.5 mm (H)
Weight 146g
Chassis Material Aluminum
Silkscreen Colour Black
ower Consumption 2.5 W
Operating Temperature 0 ˚C~40 ˚C / 32 ˚F~104
Storage Temperature −20 ˚C~60 ˚C / −4 ˚F~140
Relative Humidity 20~90 % RH (non-condensing)
Connection