Converters.TV 327 User manual

YPbPr to DVI-I Format
Converter - ID# 327
Operation Manual

Introduction
YPbPr signal to digital DVI signal.
It allows you to connect the YPbPr output from Video equipments to the DVI
input of the monitors or projectors.
Its high bandwidth capability supports a wide range of PC and HD V resolutions.
Features
●It enables you to connect DVD or set top box with YPbPr output to the DVI input
of your new monitors or projectors.
●You can select digital output format between RGB and YPbPr.
●Supports up to 1600 x 1200 @ 60 for PC input and 1920 x 1080p @ 60 for HD
input.
●Supports DDWG standard for DVI complaint monitors.
Operating Functions
and
Controls
1. Analog YPbPr input connector:
Connects to the YPbPr or YCbCr output of your DVD or set top box
2. DC power supply 5V 500mA-2A center-positive
3. LED light
4. DVI-I output connector:
Connects to the DVI input of your TV, Monitor, or Projector
5. Out Switch: Switch output format between YPbPr and RGB Set the
switch to YPbPr to get digital YPbPr output;
Set the switch to RGB to get digital RGB output
Pin Configuration
DVI-Integrated(DVI-I): Supports both analog and digital connections to the
display This 29-pin connector can carry single or dual-link all-digital
video/data signals on 24 pins and uses 5 pins to carry analog video/data
signals and ground

Combined Analog and Digital Connector Pin Assignments
Pin Signal Assignment Pin Signal Assignment Pin Signal Assignment
1 T M D S Data2- 9 T M D S Data 1- 17 T M D S Data0-
2 T M D S Data2+ 10 T M D S Datal+ 18 T M D S Data0+
3T M D S Data2/4
Shield 11 T M D S Data1/3 Shield 19 T M D S Data0/5 Shield
4 T M D S Data4- 12 T M D S Data3- 20 T M D S Data5-
5 T M D S Data4+ 13 T M D S Data3+ 21 T M D S Data5+
6 DDC Clock 14 +5V Power 22 T M D S Clock
Shield
7 DDC Data 15
Ground (Return for
+5V, Hsync, and
Vsync)
23 T M D S Clock+
8Analog Vertical
Sync 16 Hot Plug Detect 24 T M D S Clock-
C1 Analog Red C2 Analog Green C3 Analog Blue
C4 Analog Horizontal
Sync C5 Analog GroundiAndog R,G,1 3 return
Connection and
Installation

Specifications
Input: Analog YPbPr on 3 RCA connectors
Input signal:
Y : 1 Vp-p 75 ohm,
Pb/Pr: 0 7 Vp-p, 75 ohm
Output: DVI-I connector
Output signal: Digital RGB or YPbPr data bitstream
Compliant ith DVI Rev 1.0
Operation frequency: up to 165MHz
Input/ Output resolution: PC : VGA@60 s VGA@72 • VGA@75 VGA@85
SVGA@60 s SVGA@72 s SVGA@75 s SVGA@85
XGA@60 • XGA@70 • XGA@75 XGA@85
SXGA@60 s SXGA@75 s SXGA@85 s UXGA@60
1152@70 • 1152@75 • 1152@85
HD/RGB 480i@60 s 576i@50 s 480p@60 • 576p@50 s
720p@60
720p@50 1080i@60 • 10801@50 s 1080p@60
1080p@50 • 1080p@30 s 1080p@25 1080p@24
Dimension (WxHxD) : 76 * 30 * 105mm
Po er: 5V 500mA-2A Center-positive