Converters.TV CRS-2000 User manual

SCART to SVHS Converter
(CRS-2000)
Operation Manual
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

Introduction
This unit will convert from a scart input to a SVHS or composite output. It is ideal for
digital satellite receivers or DVD players that do not have a suitable S-Video output to
feed a video projector or picture signal to a surround sound system.
Precautions
1. Do not expose this product to direct sunlight.
2. Keep the unit away from radiator, heat sources and magnetic field.
3. Do not place it in very dusty or humid locations.
4. Use this unit in a horizontal position only.
5. Do not put heavy objects on top of the converter.
6. Put the unit in an open space that has good ventilation.
7. If the unit is acting abnormally keep the unit away from TV or other electronic
equipment.
8. Unplug the unit from the power supply when it is not to be used for a long period
of time.
eatures
•Converts scart RGB signal from a satellite receiver or other video sources to S-
VHS or Composite video for recording or further connecting to TV.
•It performs the functions of a converter plus video stabilizer.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

Operation controls and functions
Front Panel
1. Power ON/O indicator- This will illuminate when the power has been turned
on.
Rear Panel
1. DC 7.5V- This is where you connect your power supply.
2. Vide output- This is the video output port. An RCA connector is used for
composite video to connect the port to the output device.
3. S-Video output- This is the S-Video output port. An S-Video jack for Y/C output
is used to connect the port to the output device.
4. Audio output pair (L + R)/2 sets- Two sets of audio output ports.
5. Scart RGB input- This is the input port. Connect the input port to your scart
output device (sky satellite receiver or other video sources) using your input scart
connector.
Connection and Installation
The AC adaptor power unit should not be plugged into a wall outlet until all connections
are complete.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

•Using your connector cable connect the RGB input port (Number 5 on the
rear panel) to the scart output such as a sky satellite receiver or another
type of video source.
•Using your connector cable connect the output port (Number 2/3/4 on the
rear panel) to the output device (TV or VCR).
Once all connections are complete please connect the power supply provided to the
power socket
Specifications
Input system PAL
Output system PAL
Connection terminals Scart input: 1
Video output: 1
S-Video output: 1
Audio output (R+L): 2
AC adaptor Input: 230V/50 Hz
Output: DC 7.5 V 500mA Center positive
Dimensions 236 ( ) x 130 (D) x 45 (H)
Weight 0.5 Kg
Accessory Video cable, AC adaptor
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv