Converters.TV 549 User manual

PC to Component Video Transmitter
over Cat5 Cable - 50m to 100m ID# 549
Operation Manual

Introduction
The PC to Component Video Transmitter over Cat5 Cable - 50m
to 00m is the transmitter (Tx) unit of Component over CAT5 solution,
depends on the type of receiver (Rx) unit used. PC to Component
Video Transmitter over Cat5 Ca le - 50m to 100m can extend
Component signal through CAT-5 ca les for a distance up to 50/100
meters. The installation of Cypress Component over CAT5 is easy and
quick, simply place PC to Component Video Transmitter over Cat5
Ca le - 50m to 100m next to your display, and get all necessary
ca les connected to complete and enjoy.
Features
 Supports PC/RGB and HD/YC Cr/YP Pr format input.
 Supports CAT-5/CAT-5E/CAT-6 ca le.
 Supports high definition (HD) input source up to 1080P.
 Supports PC input source up to UXGA.
 Easy to install and simple to operate.
Operating Functions
and Controls
Front Panel
1. PC/HD input: Connected the PC/HDMI input port to the PC/HDMI
output of your source equipment.
2. Audio input: Connected external audio source.
3. Toslink input: Connected external SPDIF audio source.

Rear Panel
1. Power ON/OFF indicator.
2. DC V/1A: Power input.
3. CAT -Out: Connected the video output to the video input of the CAT5
receiver unit using CAT-5 ca le.
4. Switch: Select output audio source (SPDIF or L/R).
Specifications
Supported resolutions HD: up to 1080p; PC: up to UXGA
Input audio source ports Audio L/R and Toslink/SPDIF
Output video source port CAT-5
Power Supply 5V/1A DC (US/EU standards, CE/FCC/UL
certified)
Dimensions (mm) 99.5(W) x 79.5(D) x 32.5(H)
Weight(g) 200
Chassis Material Metal
Silk Skin Color Black/Silver
Operating Temperature Operating from 0°C~70°C°C ~ C