Converters.TV 542 User manual

HDMI Video Transmitter over
Cat5 Cable – 50m to 250m ID# 542
Operation Manual

Introduction
HDMI Video Transmitter over Cat5 Cable - 50m to 250m is the transmitter
(Tx) unit of HDMI over CAT5 Tx/Rx solution, depends on the t pe of receiver
(Rx) unit used, HDMI Video Transmitter over Cat5 Cable - 50m to 250m can
extend HDMI signal through CAT-5 cables for a distance up to
50/100/150/250 meters. The installation of HDMI Over CAT5 is eas and
quick, simpl place HDMI Video Transmitter over Cat5 Cable - 50m to
250m next to our HDTV source such as a DVD pla er, then place the
receiver unit (ID # 539 / ID # 540 / ID #541) next to our displa , and get all
necessar cables connected to complete and enjo .
eatures
1. Compliant with HDMI 1.2, HDCP 1.1 and DVI 1.0 specifications.
2. Supports CAT-5/CAT-5E/CAT-6 cables of variable t pes.
3. Supports high definition input up to 1080P, output resolution follows
input.
4. Eas to install and simple to operate.
Operating unctions
and Controls
ront Panel
1. HDMI OUTPUT:
Connect the HDMI input port to the HDMI or DVI output of our
source equipment such as DVD pla er or set-top-box.
Rear Panel

1. VIDEO OUTPUT:
Connect the VIDEO output to the VIDEO input of the receiver unit
using CAT-5/CAT-5E/CAT-6 cable.
2. DDC OUTPUT:
Connect the DDC output to the DDC input of the receiver unit
using CAT-5/CAT-5E/CAT-6 cable.
Note: For advanced user onl , if it's known that the DDC or HDCP
data are not required for the source and the displa , ou can use
a single CAT-5 cable to connect the VIDEO ports of transmitter
and receiver.
3. Power:
Plug the 5VDC power suppl into the unit and connect the
adapter to AC wall outlet.
Specifications
1. Supporte resolutions: HDMI - 480i/480p, 576i/576p, 720P@50/60Hz,
1080i@50/60Hz, 1080p@50/60Hz
2. Input: 1 CAT-5 input for VIDEO, 1 CAT-5 input for
DDC
3. Output: 1 HDMI female port
4. Power: 5V DC power suppl
5. Dimensions: 123(W) x 125(D) x 30(H)mm
6. Weight: 700g

Connection and
Installation
ID #542