Converters.TV 15135 User manual

HDMI 3D 4k2k over Optical Fiber
Transmitter & Receiver # 15135 15136
Operation Manual

Introduction
The 4Kx2K HDMI to Optical Transmitter and Receiver set uses fiber optic
cables to give ou longer transmission distances (up to 300m) utilizing
thinner, lighter cables for greater flexibilit in installations. With this s stem
the HDMI signal is uncompressed and is full compliant with HDMI and
HDCP
Applications
Digital signage
Airport signage
Advertising displa s
Video wall dspla s
Surveillance s stems
• Residential Installations
Features
•
•
• Long transmission distances – up to 300m with OM3 50/125um
cable (SC-SC connector)
•!!"##"
•$%%
•!#&#
System
Requirements
Source device such as a DVD or Blu-ra pla er with HDMI cables and
output displa s such as HDTV’s and Monitors with HDMI ports.

Operation  Transmitter Front and Rear Panels
Controls and
Functions
1. POWER LED
This LED will illuminate when connected to an AC wall outlet.
2.OPTICAL LINK LED
The LED will illuminate when the optical cable is connected and
has successfull detected and communicated data between the
Transmitter and Receiver. If the LED is not illuminated then check
that the fiber optic cable is properl connected and that the
cable itself is undamaged.
3.HDMI LINK LED
This LED will illuminate when the Transmitter unit is receiving a HDMI
signal from the source device
4. HDMI IN
Connect to an HDMI input source such as a DVD or Blu-ra pla er
with a HDMI cable.
5. OPTICAL
Connect the SC-SC multi-mode optical cable to the Transmitter
and Receiver units.
6. DC 5V
Connect to the power adaptor included in the package to an AC
wall outlet for power suppl .
Receiver Front and Rear Panels
1. POWER LED
This LED will illuminate when connected to an AC wall outlet
2. OPTICAL LINK LED
The LED will illuminate when the optical cable is connected and

has successfull detected and communicated data between the
Transmitter and Receiver. If the LED is not illuminated then check
that the fiber optic cable is properl connected and that the
cable itself is undamaged
3. HDMI LINK LED
This LED will illuminate when the device is successfull communicating
with the displa
4. HDMI OUT
Connect to a HDMI Displa device, such as a TV or monitor, with a
HDMI cable
5. OPTICAL
Connect the SC-SC multi-mode fiber optical cable to the
Transmitter and Receiver units.
6. DC 5V
Connect to the power adaptor included in the package from the
AC wall outlet for power suppl
Specifications
Video Bandwidth '()*'+,"
Optical Fiber -.')*./
Transmitter
Input Port *0
Output Port *0/$"-
Receiver
Input Port *0/$"-
Output port *0
Resolution Support 1,23456,2
178'3*'8'9.'):'(;
09).)'(;
HDMI In Out Cable Distance 5*'9;*'9-;8/"
5:9;:9-;*/"
Optical Cable Distance 5''%!-.')*.
-$""
Power Supply .)+:295)&5
&)$)5<#;
ESD Protection =>1
?8@9/!;
?@9!;
Dimensions (Each) :.+.94;0*.+.9;0*+:9;
Weight(Each) ''
Chassis Material 2
Color =@
Operating Temperature 'A3'A
Storage Temperature BCDEFGEHEIDEFGEJEBKEFLEHEMKDEFL
Relative Humidity '3N'OP9/;
Power Consumption *+.4) 6*+4)P6

Connection
Diagram