Coolon CASSIDY User manual

494.1mm183mm
415mm
110 m m
494mm
240mm
30mm
Ø17mm
320mm
Ø13mm
Cassidy LED Floodlight
VOLTAGE IN
100 – 240VAC 47-63Hz
POWER
220W
IP/IK RATING
IP66 / IK08
OPERATING TEMPERATURE
-20 to +60°C
The U-Bolt Pole Mounting Clamp Kit is specifically
designed for mounting products with a flat mounting
surface on a variety of circular poles that are widely
used in the industry.
For more information visit:
https://www.coolon.com.au/dl/ind-acc-u-bolt-pmc
Electrical Characteristics
Bracket Footprint U-Bolt Pole Mounting Clamp Kit x 2 (Optional)
WIRING DIAGRAM
Page 1 / 2[email protected] • aus. 1300 287 533 • intl. [phone] • www.coolon.com.au
As a matter of continual improvement, the requirements and recommendations in our manuals evolve to reflect new industry requirements and the latest feedback from the field.
The Coolon team is working hard to ensure optimal product operation and the safety of all users, please check our website periodically to ensure you are up to date with the latest information.
Product must be installed by a suitably qualified person. All documentation is subject to change without notice.
www.coolon.com.au
Page 1 / 2CASSIDY INDUSTRIAL LED MANUAL EDITION 1.2

Page 2 / 2[email protected] • aus. 1300 287 533 • intl. [phone] • www.coolon.com.au
As a matter of continual improvement, the requirements and recommendations in our manuals evolve to reflect new industry requirements and the latest feedback from the field.
The Coolon team is working hard to ensure optimal product operation and the safety of all users, please check our website periodically to ensure you are up to date with the latest information.
Product must be installed by a suitably qualified person. All documentation is subject to change without notice.
www.coolon.com.au
The mounting bracket allows for a flat surface and pole mounting.
When mounting to a flat surface, secure using a minimum of
2x M10 bolts. When mounting to a pole use a
U-Bolt Pole Mounting Clamp Kit.
Additional anchor points have been provided for lanyards if desired
(lanyards not supplied)
MOUNTING
IMPORTANT
NOTE: In order to adjust bracket angle the bracket armlock
teeth must be separated completely from the housing.
8mm
• Read through this manual before installation
• Handle the product with care
• The product must be grounded
• The product must be installed by a suitably qualified person
• Turn OFF the power before installation and maintenance
• Make sure the product is securely installed
• The housing might become hot after operation
• Keep optical face clean
Primary use: flood light for commercial and industrial applications.
Rotation Angle Lanyard Anchor Points
150°
145°
0°
Page 2 / 2CASSIDY INDUSTRIAL LED MANUAL EDITION 1.2