Coolon CP24-ELV User manual

CP24 INDUSTRIAL LED MANUAL EDITION 0.6
CP24 Luminaire w/ Standard Bracket
WIRING INSTRUCTIONS
MOUNTING BRACKET INSTALLATION
Adjust the angle of the light tting, and line up bracket holes
to either the top or bottom mounting holes.
Step 3
Mount light tting to appropriate location.
Fixed Plant Bracket Mobile Plant Bracket
Step 1
Use Loctite® 222™ retaining compound (not included) to
secure the dome nut. Screw in and tighten bolts on both sides.
Use Loctite® 222™ retaining compound
(not included) to secure the dome nut.
Step 4
Page 1 / 2[email protected] • aus. 1300 287 533 • intl. [phone] • www.coolon.com.au
Product must be installed by a suitably qualied person. All documentation is subject to change without notice. Refer to our website for the latest information.www.coolon.com.au
Ø12mm
50mm 50mm
Ø12mm
50mm 50mm
To adjust the mounting angle, unscrew bolt and
loosen dome nut.
Step 2
Ø13mm
50mm 50mm
Page 1 / 2
White (Positive)
Black (Negative)
24VDC IN
Steel Wire
Braided Cable
+ –
24VDC IN
Steel Wire
Braided Cable
232mm
108mm 265mm
211m m
216mm
Red (Positive)
Black (Negative)
White (0-10V Dimming)
CP24-ELV CP24-DIM

Bracket - Actual Size
(1:1 when printed on A4 page)
CP24 INDUSTRIAL LED MANUAL EDITION 0.6
Page 2 / 2
Page 2 / 2
[email protected] • aus. 1300 287 533 • intl. [phone] • www.coolon.com.au
Product must be installed by a suitably qualied person. All documentation is subject to change without notice. Refer to our website for the latest information.www.coolon.com.au
50mm
spacings
Ø12mm holes