COOPER LIGHTING
FAIL-SAFE®
CLEANROOM
DIMENSIONS
• Lens is clear extruded with
prisms positioned inside
fixture and smooth surface
on the outside for easy
cleaning
• Flush mounted, stainless
steel machine screws
• Die-formed, 20 ga. CRS
housing contains no holes .
Standard white high
reflectance polyester
powder coat finish
• Unique, Particulock™ lens
retention system utilizes
continuous, 18 ga. media
clampdowns
• Two braided, stainless steel
cables on one side of door
provide hinging
• One-piece, 18 ga., fully
gasketed, outside door
with die-formed and
beveled edges
• Standard, Class P, CBM/ETL
ballast
• White, closed cell,
Flexiseal™ gasketing
system
• Gasketed access plate with
two flattened, 7/8" diameter
knockouts
DESCRIPTION
The Fail-Safe CFS Series is
designed for use in non-laminar
air flow clean rooms. This surface
mounted clean room luminaire
has a hole-free design and is
enclosed and gasketed to protect
against infiltration of particles and
airborne bacteria. The sealed
housing and door frame allow
relamping without contamination
of the clean areas. An emergency
battery pack is available as an
option. These luminaires are U.L.
listed and C.S.A. certified for wet
locations and are manufactured in
accordance with U.S.D.A. and
F.D.A. All fixtures have been
tested and reported in compliance
with Federal Standard 209E, Class
100 (M3.5) and above. 200 PSI
hose down rating is standard.
The CFS Series is suitable for use
in I.E.S. Class 100, 1,000, 10,000
and 100,000 clean room
environments.
CFSLP
14W-216W
Fluorescent
1' x 2', 1' x 4', 2' x 2', 2' x 4'
FLUORESCENT SURFACE
ONE-PIECE DOOR
T5 LAMP TECHNOLOGY
T8 LAMP TECHNOLOGY
ORDERING INFORMATION
SAMPLE NUMBER: CFSLP-24-432-120-IP12-EB82
Series
CFSLP=
Fluorescent
Surface Type
CFS12CR 4=
Fluorescent
Corrosion
Resistant
CFS24CR 4=
Fluorescent
Corrosion
Resistant
Voltage
120=120V
277=277V
347=347V
UNV=120V
through
277V
Ballast
LEOC8=Energy
Saving
Ballast for
use with T8
Lamp
LE3=Energy Saving
Ballast 5
Electronic Ballast 2
EB81=(1) Ballast for
use with T8
lamp
EB82=(2) Ballasts
for use with
T8 lamps
EBX1=(1) Ballast
for use with
Biaxial
Lamp
EBX2=(2) Ballasts
for use with
Biaxial
Lamps
EB51=(1) Ballast for
use with T5
lamp
EB52=(2) Ballasts
for use with
T5 lamps
Options
EBP=Emergency
Battery Pack
GLR=Fuse and
Holder
RIF=Radio
Frequency
Interference
Filter
SF1=TORX®-
Head
Fastener
(center pin
reject)5
Housing Options
SHN=Stainless
Steel,
Brushed
304 Finish
SHP=Stainless
Steel,
Polyester
Powder
Finish
ALH=Aluminum,
Polyester
Powder
Finish
Door/Finish Options
Blank=Standard, CRS
with baked
white finish
SSN=Stainless Steel
Door/
Brushed 304
Finish
SSP=Stainless Steel
Door/
Polyester
Powder Coat
Finish
ALP=Aluminum
Door/
Polyester
Powder Finish
ALX=Extruded
Aluminum /
Anodized 3
ALXP=Extruded
Aluminum/
Polyester
Powder Coat
Finish 3
Lens Type
IK12=K-12
Prismatic
Acrylic
IP12=K-12
Prismatic
Polycarbonate
KSH251=Bat Wing
Distribution
93=Prismatic
Tempered
Glass
Width
12=12"
24=24"
Lamp Type
2' Nom. Length
T5 Fluorescents
114=(1) 14W Lamp
214=(2) 14W Lamps
314=(3) 14W Lamps
414=(4) 14W Lamps
124=(1) 24W HO Lamp
224=(2) 24W HO Lamps
324=(3) 24W HO Lamps
424=(4) 24W HO Lamps
T8 Fluorescents
117=(1) 17W Lamp
217=(2) 17W Lamps
317=(3) 17W Lamps
417=(4) 17W Lamps
2U6T8=(2) 32W Lamps
2U15/8=(2) 31W Lamps
3U15/8=(3) 31W Lamps
Biaxial Fluorescents
140BX=(1) 40W Lamps
240BX=(2) 40W Lamps
340BX=(3) 40W Lamps
4' Nom. Length
T5 Fluorescents
128=(1) 28W Lamp
228=(2) 28W Lamps
328=(3) 28W Lamps
428=(4) 28W Lamps
154=(1) 54W HO Lamp
254
=(2) 54W HO Lamps
354
=(3) 54W HO Lamps
454
=(4) 54W HO Lamps
T8 Fluorescents
132=(1) 32W Lamps
232=(2) 32W Lamps
332=(3) 32W Lamps
432=(4) 32W Lamps
Notes: For additional options, consult your Cooper Lighting Representative. Specifications and Dimensions subject to change without
notice. Electronic ballast may cause interference with other electronic devices. If interference occurs, move the device away from the
product or plug/connect into a different circuit/outlet.
1The KSH25 provides improved visual performance and wide angle distribution. This lens has an integral prism pattern designed so that
prisms face the lamp cavity and still supply superior photometrics. Highly recommended for all high tech manufacturing environments. 2
For specific electronic ballast, specify brand and catalog number. 3Not rated for 200 PSI hose down. 4Housing and door will ship with
Brushed Finish. SSN and SSH do not need to be specified with CR option. 5Available with CR option only. 6Only required if using SF1
option.
1 1/2"
[38mm] 1 3/4"
[44mm]
4 3/16"
[106mm]
2"
[51mm] 11 11/16"
[297mm]
(2) 7/8" [22mm] KO
Gasketed Access Plate
(4) 3/8" [10mm] Dia.
Mounting Hole
12"
[305mm]
24"
[610mm]
1 1/2"
[38mm]
4 3/16"
[106mm]
2"
[51mm] 11 11/16"
[297mm]
(2) 7/8" [22mm] KO
Gasketed Access Plate
(4) 3/8" [10mm]
Dia. Mounting Hole
36"
[914mm]
48"
[1219mm]
1 3/4"
[44mm]
1 1/2"
[38mm]
10 3/16"
[259mm]
12"
[305mm] 23 11/16"
[602mm]
(2) 7/8" [22mm] KO
Gasketed Access Plate
(4) 3/8" [10mm] Dia.
Mounting Hole
12"
[305mm]
24"
[610mm]
1 1/2"
[38mm]
10 3/16"
[259mm]
12"
[305mm]
23 11/16"
[602mm]
(2) 7/8" [22mm] KO
Gasketed Access Plate
(4) 3/8" [10mm] Dia.
Mounting Hole
36"
[914mm]
48"
[1219mm]
LAMP CONFIGURATIONS
9 1/2"
[241mm]
5"
[127mm]
5"
[127mm]
5"
[127mm]
7 1/2"
[190mm]
7 1/2"
[190mm]
Accessories (Order Separately)
VRSD=TORX®-Head Vandal Resistant
Screwdriver 6
1484
