Cooper Lighting Fail-Safe Compass 12 User manual

Catalog #
Project
Comments
Prepared by
Type
Date
SPECIFICATION FEATURES
04/11/2007 9:12:09 AM
Consult your representative for additional options and finishes.
Specifications and Dimensions subject to change without notice.
ADC041336
DESCRIPTION
The Harmony Compass combines exceptional aesthetics with remarkable
strength. Cast, extra-heavy aluminum walls of the front/back housings offer
rugged durability and afford efficient heat dissipation. A premium,
five-stage paint finish further protects the housings. Full-round lens is
fashioned from high-quality, tempered borosilicate glass. External convex
prisms and internal sandblasted surfaces create a lens that gives a smooth,
even glow. A liquid injection-molded silicone gasket provides a water- and
dust-tight seal between the fixture's housing and front-lens assembly.
Compass is CUL-listed for wet locations in all mounting positions.
Application
This handsome fixture will blend
seamlessly into virtually any
unsupervised environment where
broad, low-glare light distribution
is esthetically pleasing and security
essential: shopping centers,
roadside malls, corporate building
exteriors or transportation stations.
Lens
Affording optimal
shock-resistance, full-round,
molded, tempered borosilicate
glass is 0.225 inches thick and
floats on gasket. Dissipates heat
and is unaffected by UV light,
pollution and cleaning solutions.
Relamping hook holds lens
assembly for easier maintenance.
Optics
Internal, sandblasted matte finish
and external, half-inch, convex
pillow prisms spread lamp image
and provide an even glow. Fixture
boasts white 95% TR internal
diffuser. Arc tube is centered
within the fixture to provide
rotationally symmetrical
distribution without hot spots. For
an even softer glow, use the
optional - SW "Soft White Lens."
Surface Housing
Back housing is precision TruGen
die-cast for superior strength and
product uniformity. Marine-grade,
low-copper-alloy aluminum resists
corrosion. Extra-heavy thickness
promotes durability and assures an
efficient heat sink for internal
components.
Regressed Housing
Cast housing is nominal .125"
thick, marine grade, low copper
alloy aluminum. Comes with
concealed cast aluminum plate to
seal regressed housing to front
lens face. Two back-box
configurations are available
depending on installation. The BB
option is for stud wall and other
combustible material applications
and comes with adjustable
brackets for 18" to 24" on center
spacing. The CP option is for
concrete pour and other
noncombustible material
applications and comes with an
adjustable bracket to
accommodate variable wall
thickness. A quick-connect plug
wiring system allows for easy
installation. Back box may be
shipped separately for early
installation (see REGRESSED
HOUSING MOUNTING AND
ADVANCED ORDERING
INFORMATION). Wall mount only.
Gaskets
Long-life, injection-molded silicone
gasket promotes water- and
dust-tight seal between housing
and front-lens assembly.
1/8-inch-thick, closed-cell EDPM
gasket facilitates proper seal
between luminaire and mounting
surface. No additional
caulking is required.
Lamp
(by others)
Socket
HID socket is a 4KV rated porcelain
medium-base socket with a
nickel-plated brass screw shell. CFL
Socket Cont.
socket incorporates 26-watt
GX24q3; 32-watt; GX24q3; or
42-watt GX24q4 base with
stainless-steel retention clip and a
2-pin reject that ensures proper
lamping and lamp retention.
Fluorescent socket is poly-
carbonate. Incandescent socket is
porcelain medium-base with
nickel-plated brass screw shell.
Ballast
CFL ballasts are electronic
universal voltage 120-277V, less
than 10% harmonic distortion with
minimum starting temperature of
-18°C (0°F). HID ballasts are
standard HPF core & coil with
minimum starting temperatures of
-40°C (-40°F) for HPS and -30°C
(-20°F) for MH.
Fasteners
Four stainless-steel TORX® screws
with center reject pin. Screw heads
are recessed into casting to
maximize tamper-resistance.
Sealed with a gasket, fasteners are
captive.
Finish
Finish is TGIC, textured, thermoset
polyester-powdercoat that is
applied in five-stage process at
2.0-mil thickness and baked on at
400° F. Finish is 500-hour-salt-
spray test-rated and has an impact
rating of 160 inch/pounds.
Labels
CUL wet-listed for wall and ceiling.
COMPASS 12"
Harmony(TM)
26W - 42W
Compact
Fluorescent
50W - 100W
High Pressure Sodium
Metal Halide
75W - 100W
Incandescent
RCS-12
26W-42W CT
75W-100W IN
RCS-12
50W-100W HPS/MH
4.5"
RCR-12
50W-70W HPS/MH
dia.
4.5"
115mm
305mm
12” dia. 254mm
10”
217mm
8.5”
305mm
12” dia. 225mm
8.875”
3.75”
95mm115mm
12”
305mm
INSIDE/OUTSIDE POLYCARBONATE
LENS COATING
FAIL-SAFE®

Fail-Safe • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL [phone] • FAX [phone]/2007 9:12:09 AM
Specifications and Dimensions subject to change without notice.
ADC041336
ORDERING INFORMATION
.
PHOTOMETRICS
HARMONY COMPASS 12"
ENERGY DATA
Input Watts:
Electronic
(1) 26W Compact Triple 27.0 Watts
(1) 32W Compact Triple 37.0 Watts
(1) 42W Compact Triple 47.0 Watts
High Power Factor
(1) 50W HPS 60.0 Watts
(1) 70W HPS 95.0 Watts
(1) 100W HPS 130.0 Watts
(1) 50W MH 69.0 Watts
(1) 70W MH 94.0 Watts
(1) 100W MH 125.0 Watts
Candlepower Distribution
Footcandle Multipliers
6' 8' 10' 12' 14'
x1.7 x1.0 x0.64 x0.44 x0.32
Shipping Information
Cat. No. Weight
RCS - 12 - XXCT 7.0 lbs
RCS - 12 - XXMH 13.5 lbs
RCR - 12 - XXMH 17.5 lbs
RCS - 12 - XXHPS 13.5 lbs
RCR - 12 - XXHPS 17.5 lbs
For other than 8’ mounting heights
use appropriate multiplier value:
8.5"dia.
217mm
J-Box Mounting Plate
.250"dia.
Mounting K.O.
SURFACE HOUSING MOUNTING
J-Box Mounting
Surface Mounting
Rotationally adjustable mounting bracket is
screwed to J-Box. Fixture attaches to plate
with (2) 1/4”- 20 studs and nuts.
6 knock outs are provided in casting for
mounting directly to surface. Mounting
hardware supplied by others.

Fail-Safe • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL [phone] • FAX [phone]/2007 9:12:09 AM
Specifications and Dimensions subject to change without notice.
ADC041336
REGRESSED HOUSING MOUNTING AND ADVANCED ORDERING INFORMATION
Cut-out Template Dimensions Included
Center lines
to aid in
placement
Finished
fixtures
trim
Do not cut
outside of
pattern
perimeter
5 11/32
3 3/8
3 1/16 3 1/16
5 11/32
4 15/32
1 7/16
1 19/32
4 1/2
3 3/8
REGRESSED SAMPLE NUMBER
RCR-12-50MH-DT-BK-BB
Complete Unit
EXAMPLE: RBB-12
WITH THE STUDWALL
BRACKETS
RCR-12-LH-50MH-DT-BK-BB RBB-12
+
=
BB=Combustible Material Application
CP=Brick or Concrete Pour
LH= Less
Regressed
Housing
The following regressed housings may be
ordered in advance
RBB-12-F=For Combustible (Studwall)
Applications - Fluorescent Fixtures Only
RBB-12=For Combustible (Studwall) Applications
- HID and Incandescent Fixtures Only
RCP-12=For Non-Combustible (Brick, Concrete-
Pour) Applications - HID, Fluorescent, and
Incandescent Fixtures