Cooper Lighting 477 User manual

325
TRACK LIGHTING Accessories
COOPER LIGHTING
HALO®
L918, L936, L948 Extension
Wands
For use with most lampholders
(excluding those with integral
electronic transformers, HID
lampholders except L5300 or some
Para Trac [L3218, L3232, L3239]
lampholders) and trac. May also be
used with L2001 Solid State Adapter,
L967 or L968 Switches or, with L963, in
4 Circuit Trac.
NOT FOR USE WITH LAZER TRACK
LAMPHOLDERS
L918-18” length; L936-36” length;
L948-48” length.
Finish: White (P), Black (MB)
L917 Slope Adapters
Allows use of extension wands on
sloped or cathedral ceilings. 0°-90°.
Max Extension: 4 3/4” (121mm)
Finish: White (P), Black (MB)
L973 Canopy Adapter
Mounts permanently to outlet box.
4 1/2” sq. Not for use with electronic
low voltage lampholders, HID
lampholders or ParaTrack
lampholders except for the following:
L2005, L5038, L5300, L3240E, L3250E,
L3255E
Finish: White (P), Black (MB)
L972 C Clamp Adapter
Can be mounted on pipe up to 2”
dia. or any flat protruding surface.
Complete with 6’ 3-wire cord with
3-prong grounded plug.
Finish: White (P), Black (MB)
L1974 Weighted Base
Adapter
For portable use. May also be used
with L2001 and L2004 Adapter and
low voltage lampholders. Padded
base 5 3/8” sq. Complete with 6’
3-wire cord with 3-prong grounded
plug. Rotary on-off switch.
Finish: White (P), Black (MB)
L1973 Low Voltage
Canopy Adapter
Allows use of L2001 and L2004
Solid State Adapter or
lampholders with integral solid
state transformer in canopy
mount installations. Also for
use with L3218, L3232, L3239,
L5300, L5130 & L5138. Mounts
permanently to junction box.
5 3/8” sq.
Finish: White (P), Black (MB)
L956 Showroom Fixture
Adapter
Note: Single Circuit only
Allows canopy mounted fixture
(chandelier, etc.) to be suspended
from track. Will hold up to 35 lbs.
Can be switched on and off via track
or by pull chain on adapter.
Finish: White (P)
477 Trac Adapter Trim
For use with Halo H7, H7R and H44
recessed housings. Allows Trac
lampholders to be used with
recessed installations. Not for use
with any solid state/electronic low
voltage, HID lampholders or
fluorescent lampholders. Up to 150W
maximum.
Finish: Black Baffle with White Trim
Ring (P), White Baffle with
White Trim Ring (W)
L252, L352 Media Holders
Allows use of L400 series color filters and Cube
cell louvers with L1830 (L252) and L1838 (L352)
Media Holder L252MB L352MB
Med. Pink filter L411 L211
Warm Red filter L412 L212
Daylight Blue filter L420 L220
Medium Blue filter L421 L221
Medium Amber filter L431 L231
Medium Green filter L441 L241
UV filter L414 L214
Cube Cell L274 L275
Finish: Black (MB)

326
TRACK LIGHTING Accessories
COOPER LIGHTING
HALO®
L957 Pendant Adapter
Allows any chain hung fixture up to
35 lbs. to be suspended from track.
For use with Halo Single Circuit
Power-Trac only. Not for use on
sloped ceilings or walls.
Finish: White (P), Black (MB)
L967 Lampholder Adapter
with Switch
Converts lampholders to on/off switched
unit. Use with single circuit or two circuit
trac only. Not for use with solid state low
voltage lampholders, HID lampholders or
fluorescent lampholders. Maximum of
300 watts.
Finish: White (P), Black (MB)
L968 Lampholder Adapter
with Dimmer Switch
Converts lampholder to a dimmer and
on/off switched unit. Will control up to
150W lamp. Cannot be used with Low-
Voltage units, HID lampholders or
fluorescent lampholders. For use with
single circuit and two circuit trac only.
Finish: White (P), Black (MB)
L966 Outlet Adapter
5 Amps Max. For use with Halo Single
Circuit Power-Trac only.
Finish: White (P), Black (MB)
L2001 Low Voltage
Transformer
Allows use of L2760, L2716, L2701,
L2761 and L2736 on Halo Single
Circuit, 2-Circuit, Recessed, Raceway
and Lazer Track
Finish: White (P), Black (MB)
L961 Sign Hanger with
Hook
Will hold up to 35 lbs. Not for use
on sloped ceilings or walls.
Finish: White (P), Black (MB)
L2004 Low Voltage
Transformer
Allows use of Linea lampholders
(except LV301) on Halo Single Circuit,
Two Circuit, Recessed, Raceway and
Lazer Track
Finish: White (P), Black (MB)
L2005 50W Power-Trac
Transformer
Allows use of Linea track fixtures and pen-
dants on Halo Power-Trac or Lazer Track
Finish: Aluminum Haze (AH), White (P),
Matte Black (MB)