Cooper Lighting AMETRIX ADY071442 User manual

40
Warning
Visor and Non-Visor
: Before starting any work ensure
that all sources of power are turned off. All
work must meet local/national codes and be
performed by a certified electrician. Do not
3
2
Sheet 1 of 2
mount fixtures ertically.
Installation Instructions
Vault C-Scroll Roundel
These installation instructions are alid with the abo e Ametrix styles.
1
Small, INDOOR
YR
(Yoke mount, Remote ballast)
ADY071442 Rev B (ECN80481)
mounting plate
Using #8-32 mounting screws (by others)
2.
screw and remo e
secure mounting plate to J-box.
1. Loosen ertical set
Mounting plate
ixing mounting plate to J-box
Fixture head and yoke
Attaching fixture head and yoke to
mounting plate
set screw
#10-32
Exploded view and part call-out
Mounting
plate
J-box
(by others)
Vertical
(by others)
#8-32 Mounting
screws
Fixture head
2.
Aiming the fixture
indicator
re-tighten end screws to secure the position.
Yoke arm Indicator
an additional 10-degrees.
When the fixture head is adjusted to the desired angle,
1. To aim the fixture, loosen both #10-32 end screws. When
the PointGrab TM system indicators are lined up, the slope
of the lens face is 40-degrees. Each subsequent notch is
#10-32 End
screw
#10-32 Vertical
set screw
of mounting plate.
Hook yoke and fixture
head on lower flange
1. Attach wires ensuring all connections are properly matched.
2. Angle yoke behind bottom flange on mounting plate and
press together.
3. Secure fixture using ertical set screw.

3
87.23
8
3 "
1
1
2
"
37.15
2
2
1
88.90
"
J-box
Clearance hole
Slots fit standard 4.5"
(x4)
3
[50.8 mm]
1
4
"
6.35
(x2)
Holes for additional
support into studs.
5
8
"
3
55.79
1
"
137.16
4
1
114.60
2
4 "
2
1
2
"
11.43
Use only GE or Sylvania
CFL Lamps
C-Scroll w/ isor Roundel w/ isor
These installation instructions are alid with the abo e Ametrix styles
Mounting Plate Dimensions (In and mm)
Lamping Size Chart
: Before starting any work ensure
(lamps provided by others)
Vault w/ isor
Sheet 2 of 2
Warning
Installation Instructions
Visor and Non-Visor
that all sources of power are turned off. All
work must meet local/national codes and be
performed by a certified electrician. Do not
mount fixtures ertically.
Small, INDOOR
YR
(Yoke mount, Remote ballast)
ADY071442 Rev B (ECN80481)
This side to J-Box
Flange recei es bottom
of canopy
Mounting plate is compatible with 10 3/4"(273.05mm) and 12 3/4"(323.85mm) small remote yokes.
18" Aluminum Plate
2.03
FIXTURE SIZE
(inches/ mm) WATTAGE # OF LAMPS LAMP TYPE LAMP DESCRIPTION
10 3/4 / 273.05 39 W 1 T6 Ceramic Metal Halide
12
3/4
/ 323.85 70 W 1 T6 Ceramic Metal Halide
12 3/4 / 323.85 150 W 1 T6 Ceramic Metal Halide
12
3/4
/ 323.85 26 W 1 4-Pin Triple
Tube Compact Fluorescent
12
3/4
/ 323.85 32 W 1 4-Pin Triple
Tube Compact Fluorescent
12
3/4
/ 323.85 42 W 1 4-Pin Triple
Tube Compact Fluorescent
10 3/4 / 273.05 100 W 1 T4 Halogen (Single Ended)
12
3/4
/ 323.85 150 W 1 T4 Halogen (Single Ended)
12 3/4 / 323.85 250 W 1 T4 Halogen (Single Ended)
LAMP
(not to scale)