Cooper Lighting Viceroy 501-IP User manual

NOTES: For complete product data, refer to the Neo-Ray Specification Binder. Specifications and dimensions subject to change without notice. Products may be
modified for use in international markets. Please contact your Cooper Lighting Sales Representative for availability and ordering information.
714 COOPER LIGHTING
VICEROY
501-IP
SEMI-INDIRECT
SUSPENDED
• Minimalist fixture profile –
6.75” wide by 2.250” high.
• Optimized T5 optics for wide
light distribution and good
efficiency.
• Die formed perforated
modular housing lengths – 4’
and 8’.
• Incremental mounting on the
ceiling grid - 4’ and 8’
centers.
• Precision die cast end caps.
Construction: Housing is 20-gauge steel
construction forming a 2-1/4” x 6-3/4” architectural
profile with staggered round hole pattern backed by
white acrylic diffuser. Standard 4’-0” and 8’-0”
fixture lengths combine for continuous runs.
End Caps: End caps are precision die-cast
aluminum, mechanically attached with no exposed
fasteners.
Reflectors: Optical reflectors are die-formed high
reflectance white painted steel. Optional formed
semi-specular anodized aluminum reflector.
Electrical: Fixtures use UL listed Class P, T5
program rapid start electronic ballasts. Power factor
of 97% with less than 10% THD. Fixtures and
electrical components certified to UL and CUL
standards.
Finish: Baked on low-gloss white powder coated
acrylic finish.
Mounting: Standard modular mounting will either
include hardware that integrates and suspends
luminaire from suspended tile ceiling grid, or
hardware that secures luminaire to a junction box
and 1/4-20 threaded stud (by others). Consult
factory for non-standard ceiling applications.
6 3/4" [171mm]
2 1/4"
[57mm]
ORDERING INFORMATION:
Sample number: 501-IP-WP-1T5-1C-120-AC48-T1-24
Series
501=Viceroy
Light Output
IP=Indirect Pendant
Optics Up
W=White Reflector S=Specular Reflector
Optics Down
P=Perforated
Number of Lamps (not included)
1=1 Lamp 2=2 Lamps
Lamp Type (Length)
T5=28W (4’ Unit) T5HO=54W (4’ Unit)
Number of Circuits 1
1=1 Circuit
Wiring 1
C=Standard Circuit B=Battery Pack D=Dimming
E=Emergency/Nightlight
*Slim line ballast only (small case)
Voltage 1
1=120V 2=277V 3=347V U=Universal
Suspension
A=Aircraft Cable (single stem) P=Rigid Pendant 2
Power Feed
C=Straight Cord K=Curly Cord P=Rigid Pendant
Suspension Length
-Fixed Cable
12”, 15”, 18”, 21”, 24” or 27” (+/- 1/2” adjustment)
-Adjustable Cable
48”, 120”, 240”, 300”, or 360”
(infinite adjustment along entire length of cable)
Ceiling Type
T1=1” T-Bar ST=Structure TS=Slotted T-Bar
T9=9/16” T-Bar JB=4” Octagonal J-Box
Run Length
Specify row length in feet. Rows will be configured with 4’ and 8’
sections only. (see sample catalog #)
1 Due to various constraints, some options may not be combined with others.
2 Available with 7° or earthquake 45° swivel canopy assembly.
= Slim Line Ballast only.
S
S
STANDARD LUMINAIRE LENGTHS
MODULAR ROW CONFIGURATION
• Standard length sections join easily to create rows.
• Sections align with T-grid.
• All sections prewired for through-wiring with quick connectors.
NEO-RAY™