Cooper Lighting Streetworks Indoor Lighting User manual

Warning : Before starting any work ensure
that all sources of power are turned off. All
work must meet local/national codes and be
performed by a certified electrician.
Do not
mount fixtures vertically.
Installation Instructions
Vault C Scroll Roundel
These installation instructions are valid with the above Ametrix styles.
1
3
2
Sheet 1 of 3
Large, INDOOR
P1R
(Pendant, 1 way, Remote ballast)
Visor and Non-Visor
ADY071470 REV A(ECN070347)
Securing ixture to pendant
1. Loosen #6 32x 3/8" Pan head screws and allow canopy to slide
down pendant.
2. Feed wires from J box through wire ways in mounting plate
and secure fixture to bracing around J box.
3. Attach appropriate wires and ensure all connections are
properly matched.
4. Replace canopy and secure with both #6 32 x3/8" Pan head
screws.
#6 32 x 3/8"
Pan head screws
(2x)
Appropriate
fasteners
(by others)
(4x)
Canopy
J box
(by others) Use additional bracing
around J-box to support
ixture.
1/4 20 x 3/4"
Hex cap screw
(2x)
End screw
(2x)
#6 32 x 1/4"
Flat head screw
End cap
1. Begin by removing end screw, #6 32 x 1/4" Flat head screw
and end cap from one side of Yoke and remove fixture head.
2. Mount yoke to pendant with both 1/4 20 Hex cap screws.
3. Feed fixture wire through connector in pendant up through
mounting plate and reattach fixture head to yoke.
Wire connector
Yoke
Mounting plate
Fixture wire
#10 32
End screw
(2x)
#10 32 x3/8"
Pan head screw
(2x)
Canopy
Mounting plate
1/4 20 x3/4"
Hex cap screw
(2x)
Appropriate fasteners
(by others)
(2x)
Exploded view and part call-out
Mounting and wiring ixture Aiming the ixture
Attention:
Large ixtures require additional bracing/structure
around J-box to support ixture..
Wire ways
#10 32
End Screw
Fixture head
indicator
Yoke arm
indicator
1. To aim fixtures, loosen both #10 32 end screws on
fixture. When both indicators are lined up, the slope of the
lens face is 40 degrees. Each subsequent notch is an
additional +/ 10 degrees.
2. When fixture head is rotated to the desired angle, retighten
end screws to secure the position.

3
127
5"
19.05
4
3
"
88.90
"
127
5"
32
1
2
1
3
88.90
"
9
7.11
"
32
19.05
"
4
11
2"
38.10
Top View
Side View
1
2"
12.70
on order
Length dependant
Installation Instructions
Vault w/ visor C Scroll w/ visor Roundel w/ visor
These installation instructions are valid with the above Ametrix styles
Mounting Plate Dimensions In[mm]
Warning : Before starting any work ensure
that all sources of power are turned off. All
work must meet local/national codes and be
performed by a certified electrician. Do not
mount fixtures vertically.
Large, INDOOR
P1R
(Pendant, 1 way, Remote ballast)
Visor and Non-Visor
Sheet 2 of 3
ADY071470 REV A(ECN070347)

Installation Instructions
Vault w/ visor C Scroll w/ visor Roundel w/ visor
These installation instructions are valid with the above Ametrix styles
Warning : Before starting any work ensure
that all sources of power are turned off. All
work must meet local/national codes and be
performed by a certified electrician. Do not
mount fixtures vertically.
Large, INDOOR
P1R
(Pendant, 1 way, Remote ballast)
Visor and Non-Visor
Sheet 3 of 3
ADY071470 REV A(ECN070347)
Lamping Size Chart
(lamps provided by others)
FIXTURE SIZE
(inches/ mm) WATTAGE
# OF
LAMPS LAMP TYPE LAMP DESCRIPTION
Lamp
(not to scale)
16
1/2
/ 419.1 32 W 1 T4 Compact Flourescent
16
1/2
/ 419.1 42 W 1 T4 Compact Flourescent
16
1/2
/ 419.1 57 W 1 T4 Compact Flourescent
16
1/2
/ 419.1 100 W 1 ED17 Ceramic Metal Halide
16
1/2
/ 419.1 150 W 1 T6 Ceramic Metal Halide
16
1/2
/ 419.1 175 W 1 ED17 Ceramic Metal Halide
22
1/2
/571.5 mm 250 W 1 ET18 Metal Halide
22
1/2
/571.5 mm 400 W 1 ET18 Metal Halide
22
1/2
/571.5 mm 150 W 2 T6 Ceramic Metal Halide
22
1/2
/571.5 mm 32 W 2 T4 Compact Flourescent
22
1/2
/571.5 mm 42 W 2 T4 Compact Flourescent
22
1/2
/571.5 mm 250 W 1 ET18 Metal Halide
22
1/2
/571.5 mm 400 W 1 ET18 Metal Halide
22
1/2
/571.5 mm 150 W 2 T6 Ceramic Metal Halide
22 1/2 /571.5 mm 350 W 1 T3 Halogen(Double Ended)
22 1/2 /571.5 mm 500 W 1 T3 Halogen(Double Ended)
30 1/2 / 774.7 36 W 1 T5 Twin Tube
30 1/2 / 774.7 40 W 1 T5 Twin Tube
30 1/2 / 774.7 50 W 1 T5 Twin Tube
30 1/2 / 774.7 55 W 1 T5 Twin Tube
30
1/2
/ 774.7 36 W 2 T5 Twin Tube
30
1/2
/ 774.7 40 W 2 T5 Twin Tube
30
1/2
/ 774.7 50 W 2 T5 Twin Tube
30
1/2
/ 774.7 55 W 2 T5 Twin Tube
30
1/2
/ 774.7 250 W 2 ET18 Metal Halide
30
1/2
/ 774.7 400 W 2 ET18 Metal Halide
30
1/2
/ 774.7 900 W 1 T3 Halogen(Double Ended)
30
1/2
/ 774.7 1000 W 1 T3 Halogen(Double Ended)