Cooper Lighting AMETRIX ADY071468 User manual

Set screws
#10-32 x3/8"
(2x)
Wiring the fixture
(8x)
Pan head screws
Canopy (2x)
Sealing the fixture
#8-32 x3/8"
1/4-20 x2 3/4"
Hex olt
Attention:
Dual fixture assem lies require additional racing/structure
around J- ox to support fixture.
Pan head screws
#8-32 x3/8"
Hex olts
(x8)
(x2)
1/4-20 x2 3/4"
Cover plate
1. Slide fixture assem ly onto pendant and secure with oth 1/4-
20 x.2 3/4" hex olts.
2. Remove cover plate on ottom of fixture assem ly.
3. Attach appropriate wires and ensure all connections are
properly matched.
4. Secure cover plate with eight #8-32 x3/8" pan head screws.
Exploded view and part call-out
1/4-20 x 2 3/4"
Hex olt
Securing Fixture to eiling
fixture
around J-box to support ( y others)
J- ox
Set Screw
(2X)
(2X)
#10-32 x3/8"
Canopy
Use additional bracing
1/4" fasteners
( y others)
(4X)
1. Remove oth 1/4-20 x 2 3/4" hex olts from ottom of
pendant.
2. Remove oth #10-32 x 3/8" set screws and allow canopy to
slide down pendant.
3. Run wires from J- ox into pendant, ensure there is enough
wire to reach cover plate on ottom of fixture assem ly.
4. Using appropriate fasteners, secure fixture to ceiling. Use
additional bracing around J-box to support fixture.
5. Replace canopy and secure using oth set screws.
3
Warning
2
that all sources of power are turned off. All
Sheet 1 of 2
performed y a certified electrician.
Visor and Non-Visor
: Before starting any work ensure
work must meet local/national codes and e
Do not
mount fixtures vertically.
Installation Instructions
Vault C-Scroll Roundel
These installation instructions are valid with the a ove Ametrix styles.
1
Small, OUTDOOR
P2R
(Pendant, 2-way, Remote allast)
ADY071468 REV B(ECN80481)
Socket cap screw
(2x)
Socket cap screw
#6-32 x1/2"
#6-32 x5/8"
1. To seal fixture, ensure door is secured with provided socket
cap screws. Secure #6-32 x1/2" socket cap screws a ove door
latches.
2. Secure #6-32 x5/8" socket cap screw into center of door.
3. Refer to supplementary sheets for torque specs and aiming
instructions.

Side view Top view
5"
127
5"
127
31
2"
88.90
31
2"
88.90
3
4"
19.05
3
4"
19.05
11
2"
38.10
9
32 "
(x4)
7.11
1
2"
12.70
on order
Length dependant
Installation Instructions
Vault w/ visor C-Scroll w/ visor Roundel w/ visor
These installation instructions are valid with the a ove Ametrix styles
Mounting Plate Dimensions In [mm]
Lamping Size Chart
(lamps provided by others)
Warning: Before starting any work ensure
that all sources of power are turned off. All
work must meet local/national codes and e
performed y a certified electrician. Do not
mount fixtures vertically.
Small, OUTDOOR
P2R
(Pendant, 2-way, Remote allast)
Visor and Non-Visor
Sheet 2 of 2
ADY071468 REV B(ECN80481)
Use only GE or Sylvania
SFL lamps
FIXTURE SIZE
(inches/ mm) WATTAGE # OF LAMPS LAMP TYPE LAMP DESCRIPTION
10
3/4
/ 273.05 39 W 1 T6 Ceramic Metal Halide
12
3/4
/ 323.85 70 W 1 T6 Ceramic Metal Halide
12
3/4
/ 323.85 150 W 1 T6 Ceramic Metal Halide
12
3/4
/ 323.85 26 W 1 4-Pin Triple
Tube Compact Fluorescent
12
3/4
/ 323.85 32 W 1 4-Pin Triple
Tube Compact Fluorescent
12
3/4
/ 323.85 42 W 1 4-Pin Triple
Tube Compact Fluorescent
10
3/4
/ 273.05 100 W 1 T4 Halogen (Single Ended)
12
3/4
/ 323.85 150 W 1 T4 Halogen (Single Ended)
12
3/4
/ 323.85 250 W 1 T4 Halogen (Single Ended)
LAMP
(not to scale)