
Sit on Mower Lift 9449 Instructions
WARNING
To reduce the risk of injury when using this mower lift it
is recommended to always follow basic safety
precautions.
Read these instructions before using this product and
save these instructions for future reference.
ATTENTION
Before lifting any load, make sure you know how to use
this tool. Incorrect use of this mower lift can cause
serious injury. Any other use other than that specified
in this manual may result in damage to the mower lift
and represent a serious danger to the user.
SAFETY INSTRUCTIONS
Use the mower lift only for lifting operations.
Do not allow children to use or play with the
mower lift.
Never allow other people or children to sit on
the load when using the mower lift.
Never leave the mower lift unattended when it
is in use.
The mower lift is designed for use on flat and
stable surfaces. Use on a soft or uneven surface
may cause instability of the mower lift and
cause the mower to fall.
Check the mower lift before each use for any
sign of damage. Do not use if there is any
evidence of corrosion.
The appliance should not be used by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
TECHNICAL
This mower lift will support a sit-on mower that does
not exceed 400kg at a maximum tilt of 60°.
ASSEMBLY
Position the mower jack on a level and stable
surface.
Remove the locking pin (3).
Raise the vertical lead screw (2) and ensure the lugs
on the nut face left to right.
Replace the locking pin (3) in front of the
lead screw (2).
Turn the handle clockwise to raise the
mower and turn anti-clockwise the lower
the mower.