Copeland Furniture Sarah 6-SAR-01 Series User manual

Instructions for Sarah Fixed Top Tables
Tools required
Lay the Table Top face down on a soft
level surface. Slide a washer and a nut
over each bolt and hand tighten. Then
use the wrench to tighten the nuts
securely (Figure 1). Repeat this to
attach the other legs. Then place the
table in its upright position.
Step 1: Install the table legs
7/16” wrench
1
Figure 1.
Install Table legs
Table top
Unpack the table
onto a soft level
surface and identify
the listed items.
Sarah Fixed Top Dining Tables:
36” x 60” Table, 6-SAR-03-xx
36” x 36” Table, 6-SAR-01-xx
36” x 48” Table, 6-SAR-02-xx
Table leg
Components included:
Table top (1)
Hardware included:
#20 x ¼” nuts (8)
Washers (8) Legs (4)
Nuts and
washers
Wrench
36” x 78” Table, 6-SAR-04-xx
40” x 40” Table, 6-SAR-05-xx
40” x 60” Table, 6-SAR-06-xx
40” x 78” Table, 6-SAR-10-xx

If you have any questions or difficulties, please call us at the number below between the hours of 8:00 am and 4:30 pm eastern time.
156 Industrial Drive, Bradford, VT 05033 Tel: [phone] Fax: [phone] www.copelandfurniture.com
Care Instructions
To care for and preserve the finish on your new Copeland Furniture piece, please keep the following
recommendations in mind.
While our furniture has been finished with a durable top coat, the surface may be sensitive to
dents and abrasions during the first 30 days in your home.
Treat the surface finish gently so it does not dent or chip. Tape or stickers should not be put on
the finish.
For general care use a soft cloth to dust the furniture.
Use damp cloth with a mild soap to clean-up spills or dirt. Dry the surface thoroughly.
Please do not use any polishes, waxes or solvents to clean the surface of the furniture. This
holds true for new Copeland Furniture pieces as well as items you may already have in your
home.
Please do not place any candles directly on the surface of your furniture. The perfumes and
dyes in the candles may penetrate the finish.
Beds must be disassembled before moving to avoid damage. Never attempt to move the bed
while it is assembled.
Special Care Instructions for Cherry Furniture
Please read the following if you have purchased a Copeland product in cherry. Furniture that has been crafted from cherry
wood becomes darker with age. The change in color, from a reddish tan to a reddish brown, is most noticeable during the
first six months of ownership. It is important to understand that exposure to light accelerates the natural oxidization process.
An object left on a cherry wood surface for an extended period of time may retard the aging process in a limited area.
Simply remove the object and, over time, the surface will attain a uniform reddish brown color.