Cord Tech CEVM3T2-32T User manual

MODEL: CEVM3T2-32T
Mode 3, Type 2 to type 2
Portable EV Charger - Instruction Manual

1
Before Use
•Read all instructions & warnings carefully.
•Check the specifications of your electric vehicle to ensure compatibility.
•Fully uncoil lead prior to charging.
•Check for damage, if damaged in any way DO NOT USE.
2
Intended Use
This product is intended for charging of portable electric vehicles at public charging
stations or dedicated charging points.
3
Warnings
•Do not modify this product in any way.
•Do not wire directly into a mains supply.
•Do not submerge in water.
•Do not step on, pull, fold or knot the cable.
•Always keep the connectors clean and dry.
•Keep away from high temperature objects during charging.
•Ensure the charging cable is not a tripping hazard during use.
•If this product is damaged in any way cease use immediately, either discard or
consult a registered electrician.
•Caution must be taken when using this product to prevent risk of electric shock.
4
Vehicle Compatibility
•COMPATIBLE WITH TYPE 2 CONNECTIONS found on
multiple EV makes and models including Tesla, Audi, BMW,
Toyota, Hyundai, Jaguar, Porsche, Nissan, Volkswagen,
Volvo, Citroen, Land Rover, Mercedez, Mini Cooper,
Renault, Kia and more*
*Not all makes and models will be available in your region.
Scan this QR Code on this page for our most up to date model
list.

5
Start Charging
1) Uncoil the charging lead, gently remove the socket caps covering the connectors.
(Complete one end at a time, plugging in the open connector before removing
the opposite cap)
2) Securely connect to the charging outlet, then connect the opposite end securely
to the vehicle charging inlet.
3) Ensure the connections are secure.
NOTE: Do not force into place, if there are any obstructions take caution and remove
them before inserting the plug.
1) Disconnect from the vehicle charging inlet.
2) Close the protective cap of the vehicle charging inlet.
3) Place the protective cap onto the Type 2 connector.
4) Disconnect from the charging outlet.
5) Place the protective cap onto the Type 2 connector.
6) Store your Charging cable.
NOTE: Never use undue force when plugging in or
disconnecting from charging inlets or outlets.
6
Stop Charging
CEVB –Storage Bag (Sold Separately)
IMPORTANT: Ensure no water
or debris enters into the
connectors prior to charging.
The connectors/plugs should
be clean and dry.

7
Specifications
CordTech 5M EV Cable Type 2 To 2 (32A) Three Phase
Model
CEVM3T2
-32T (022-32T)
Rated Power
22Kw Max
Input Voltage
AC 400V+
-20%
IP Rating
Type 2 Connector:
IP55 (when socket covers are closed)
Operating Temp
-
30℃~+50℃
Storage Temp
-
40℃~+80℃
Operating Humidity
20%
-85%
8
Maintenance
•Wipe clean regularly, do not use abrasive chemicals or detergents.
•Keep the connectors free from water, moisture and debris at all times.
•Ensure the product is stored in a dry location.
•Inspect regularly for damage, if found cease use immediately.
9
Warranty
•Products are protected by warranty for a period of 1 year from date of purchase
against defects in material and functionality. Should a product fail to perform as
described within the warranty period it will be repaired or replaced. Return
product to place of purchase and provide a copy of proof of purchase for warranty
claim.
Distributed BY: Cord Tech www.cordtech.com