Cornell CSM-EL688B User manual

CSM-EL688B
CSM-EL688Y
CSM-EL688R
Stand
Mixer

1. Read the Instruction Manual carefully before using for the first
time.
2. Always switch off and unplug the appliance from the electrical
outlet BEFORE cleaning and also when it is not in use.
3. Always keep the appliance out of children’s reach.
4. This product must not be left unattended while it is connected
to the mains supply.
5. Ensure that the voltage of the appliance corresponds to the
voltage indicated on the power supply.
6. Caution when lifting this appliance as it is very heavy. Ensure
the mixer head is locked down and that the bowl, tools, outlet
cover and cord are secure before lifting.
7. Wait until the mixer tools (beater, whisk, kneading hook) have
completely stopped before turning the mixer head unit
upwards.
8. Do not immerse the motor unit in water or other liquids or place
it under running water.
9. Never attempt to disassemble the appliance yourself.
10. If the power lead, cord or plug is damaged, do not use the
appliance.
11. If the power cord is damaged, have it replaced by the
manufacturer or service agent in order to avoid a hazard.
12. Always place the appliance on a flat sturdy surface when
using.
13. This appliance should not be used by people who are
physically or mentally impaired (including children) unless
proper guidance is provided during operation.
GENERAL SAFETY PRECAUTIONS

1. Mixer Head
2. Mixing Bowl
3. Tool Socket
4. ON/OFF & Speed Controller
5. Mixer Body
6. Mixer Head Release Button
7. K Beater
8. Whisk
9. Kneading Hook
10. Spatula
11. Splatter Guard
PART IDENTIFICATION

MODEL
CSM-EL688B
CSM-EL688Y
CSM-EL688R
COLOUR
BLACK
YELLOW
RED
RATED VOLTAGE
220-240V~
RATED WATTAGE
600W
FREQUENCY
50/60Hz
How to use
1. Raise Mixer Head - Press the release button and at the same
time lift the head until it locks in the raised position.
2. To Attach Splatter Guard - Before attaching this accessory,
raise the stand mixer head and push the splatter guard onto
the rim above the accessory tool socket until it fully snaps into
place.
. Note: It is not necessary to remove the splatter guard to change
the mixing accessories.
Release
Button
SPECIFICATION
OPERATING INSTRUCTION

3. Attach Accessory - Place the mixing tool
(Beater/Whisk/Kneading Hook) into the tool socket. Push the
mixing tool into the mold of the tool socket and turn clockwise
until it locks. For removing, turn the mixing tool anticlockwise.
4. Place Bowl on Base –Place the bowl mouth facing out of the
set. Once the bowl is placed properly, turn in clockwise to lock.
5. Lower Mixer Head - Press the release button again and fully
lower down the mixer head till the mixer head locks by the
sound of a “click”.
Note: If user does not lock the mixer head properly, the machine
will not function. It is because the unit is fitted with a safety lock
function.
Bowl
Mouth

Mixing Tool’s Guide
Beater for normal to heavy mixtures:
- Cakes - Creamed frostings - Candies
- Cookies - Pie pastry - Biscuits
- Quick breads - Mashed potatoes - Meat loaf
Whisk for mixtures that need air incorporation:
- Angel food cakes - Heavy cream - Eggs
- Egg whites - Boiled frostings - Sponge cakes
- Mayonnaise - Candies
Kneading Hook for mixing and kneading yeast doughs:
- Breads - Rolls - Pizza dough
- Coffee cakes - Buns
User Reference
Maximum Capacities for the Stand Mixer :
- Shortcrust pastry 0.6 Kg flour
- Fruit cake mix 2.0 Kg total mix
- Bread dough 0.7 Kg flour
- Egg whites 10 pcs
Notes:
For most recipes, it is better to begin mixing on a slower speed
until the ingredients begin combining. Then move to the
appropriate speed range for the particular task.
You will need to change the speed of the mixer depending on
what stage of the recipe you are working on.
When mixing larger quantities, increase of the mixer speed
may be need due to the amount of mixing required and the
larger load on the machine.
When building a recipe that requires the additional of dry
ingredients such as flour, slow the speed down whilst these
ingredients are being added to avoid a snow storm effect. Once
the extra ingredients begin combining then slowly increase the
appropriate speed for the particular mixing task.

1. Always shut down and unplug the product from the power
socket before cleaning.
2. Do not use abrasive sponge, scouring pads or stiff brush to
clean the appliance.
3. Clean the exterior of the appliance using a damp cloth. Do not
immerse the main body in water.
4. Clean the used accessories under running water, warm soapy
water or in the dishwasher. Rinse and dry it before storage.
5. Do not allow the electrical components tobe exposed to water.
6. We recommend cleaning the accessories immediately to
remove any food residues from the accessories after use. This
will make cleaning easier and prevents bacterial growth.
CARE AND CLEANING