Corsair HD120 RGB User manual

2
HD120 RGB FAN
Congratulations
The CORSAIR HD RGB series of fans gives you high performance and individually
customizable RGB LED lighting in one package. Personalize your system lighting and
tailor your performance with PWM control.
HD RGB Kit Contents
Three fan Kit
Fans 3
Fan Hub 1
Fan Controller 1
Mounting Screws 12
Mounting Strips 2
Single Fan Kit
Fan 1
Fan Hub 1
Fan Controller 1
Mounting Screws 4
Mounting Strips 2
Single Fan Fan 1
Mounting Screws 4
HD RGB SERIES
HD120 RGB
PERFORMANCE FANS WITH CUSTOMIZABLE LIGHTING MODES AND COLORS
INSTALLATION GUIDE

4
HD120 RGB FANHD120 RGB FAN
3
>Color Selection – White > Red > Orange > Yellow > Green >
Blue > Violet > Cycle through all colors > return to beginning.
>Mode Selection – Demo Mode (All modes) > Static > Breathing > Flicker >
Sequential > Marquee > Rainbow > Return to beginning.
>Speed Selection – High > Medium > Slow > Return to Beginning.
1. Once all items are connected properly and powered on simply press the button of
the corresponding option you would like to change once in order to move forward in
the selection cycle.
2. The buttons are labeled on the fan controller itself.
a. Color = Color Selection
b. Mode = Mode selection
c. Speed = Speed Selection
InstallationHD RGB Series Features
>Connection Notes
• The Fan LED wiring must be connected
to the fan hub in the order you want the
lighting eects to be displayed.
• Fans must start at “1” and continue in
series. 1 > 2 > 3 > 4 > 5 > 6
• Any fan not connected in series will break
communication and the RGB LED lighting
function will not work.
>Mount the fan(s) to the location
of your choice in the chassis.
>Find a location for the fan hub that allows
connection for all of the fans RGB LED cables
installed in your system to reach.
• The fan controller will also need to be
plugged into the fan hub for control of the
RGB LED lighting.
>Mount the fan hub with the provided
mounting strips.
MODE
StaticDemo Mode Breathing Flicker Sequential Marquee Rainbow
SPEED
High Medium Slow
COLOR
White Red Orange Yellow Green Blue Violet W>R>O>Y>G>B>V

6
HD120 RGB FANHD120 RGB FAN
5
Optional InstallationInstallation Continued
>Find a location for the RGB LED controller that allows the cable to reach
the fan hub and gives you easy access to the buttons.
>Mount the RGB LED controller with the provided mounting strip.
>Plug in the 3 pin cable from the fan controller into the fan hub.
>Plug in the SATA power cable from the fan hub into an unused
SATA power connector from the system PSU.
>Plug the fan power cable into an unused fan port on your MB or fan controller.
• The fan power cable provides power and PWM control for the fan.
• The RGB LED cable provides power and control for the RGB LED’s.
>Both cables are required to be plugged into their
respective ports in order for proper operation of the fan.
>An optional cable is supplied that allows connection to a pushbutton
to operate the mode, color, and speed options from an external source.
>Chassis buttons such as reset pushbutton or power pushbutton
are examples of pushbutton that would work with the optional cable.
>Connect the optional cable to the port on the top of the controller
(the connector next to the “HD RGB Controller” on the fan controller.)