Cosen SH-460M User manual

COSEN SAWS
SH-460M
Semi-Automatic Miter Cutting Bandsaw
Instruction Manual
The Pinnacle of Cutting Performance
Cosen Mechatronics Co., Ltd.



NOTE:
Read this instruction manual carefully to familiarize yourself with the installation,
operation and maintenance of your COSEN bandsaw machine.
Operate the machine following the procedures described in the manual to prevent
personal injuries or machine damage.
Keep this manual handy and refer to it whenever you are uncertain of how to
perform any of the procedures.
For technical support or parts purchase, please contact your nearest COSEN
representative or our service center:
For Europe:
email: [email protected]
phone: [phone]
fax: [phone]
web: www.cosensaws.eu
For Taiwan and other countries:
email: [email protected]
phone: [phone]
fax: [phone]
web: www.cosen.com.tw
For US, Mexico, and Canada:
email: [email protected].
phone: [phone]
toll free: +1-877-SAWING1
fax: [phone]
web: www.cosensaws.com
For China:
email: [e-mail]
phone: [phone]
web: www.cosensaws.cn
Instruction Manual: SH-460M
Semi-Automatic Miter Cutting Bandsaw
Ver.5 2018 /01/08
©2013 by COSEN MECHATRONICS CO., LTD.
No part of this publication may be photocopied or otherwise reproduced without the prior written
permission of COSEN.
Printed in Taiwan
FROM THE MANUFACTURER
Thank you for your purchase of COSEN’s bandsaw machine and your trust in the COSEN
brand.
We are excited to have you as our valued customer and look forward as much as you do to
the accelerated productivity, long-lasting endurance and superb cost-effectiveness this
machine is about to bring to you.
To ensure you are fully utilizing our machine and being advantaged in every possible way,
please do take your time and read through this instruction manual.
Any comment or suggestion in making our service better, please do not hesitate to let us
know. Thank you again!

Safety rules
Make sure your work area is cleared of uninvited people and obstacles
every time before you start operating the machine.
Never step or stand on the roller table. Your foot may slip or trip on the
rollers and you will fall.
Never wear gloves or loose clothing when operating the machine. It may
lead to serious injury if they are caught in the running machine. Wrap or
cover long hair.

Never touch the running saw blade with gloves or not. It is dangerous if
your hands, clothing or gloves are caught by the running blade.

Make sure any use of fire is prohibited in the shop and install a fire
extinguisher or other fire control device near the machine when cutting
titanium, magnesium, or any other material that produces flammable chips.
Never leave the machine unattended when cutting flammable materials.
Use a water-soluble cutting fluid on this machine. Oil-based cutting fluids
may emit smoke or catch fire, depending on how they are used.

Never cut carbon or any other material that may produce and disperse
explosive dust. It is possible that sparks from motors and other machine
parts will ignite and explode the air-borne dust.

Safety rules

Never adjust the wire brush or remove chips while the saw blade is still
running. It is extremely dangerous if hands or clothing are caught by the
running blade.

Stop the saw blade before you clean the machine. It is dangerous if hands or
clothing are caught by the running blade.

Never start the saw blade unless the workpiece has been clamped firmly. If
the workpiece is not securely clamped, it
will be forced out of the vise
during cutting.
Take preventive measures when cutting thin or short pieces from the work
to keep them from falling. It is dangerous if the cut pieces fall.

Use roller tables at the front and rear sides of the machine when cutting
long work. It is dangerous if the work piece falls off the machine.
Turn off the shop circuit breaker switch before performing maintenance on
the machine. Post a sign indicating the machine is under maintenance.

i
Table of Contents
Section 1 –Safety Information
1-1
Safety Instructions ………………………………………………………………………………………………………
1-1
Safeguard Devices ……………………………………………………………………………………………………….
1-3
Emergency Stop ………………………………………………………………………………………………………….
1-4
Illustration: Emergency Stop ………………………………………………………………………………………
1-5
Safety Labels ……………………………………………………………………………………………………………….
1-6
Illustration: Safety Labels ………………………………………………………………………………………..…
1-9
Hearing Protection ……………………………………………………………………………………………………...
1-10
CE Compliance …………………………………………………………………………………………………………….
1-10
Risk Assessment ………………………………………………………………………………………………………….
1-10
Section 2 –General Information
2-1
Specification ……………………………………..………………………………………………………………………..
2-2
Machine Parts Identification ……………………………………………………………………………………….
2-3
Floor Plan …………………………………………………………………………………………………..……………….
2-4
Section 3 –Moving & Installation
3-1
Location & Environment ………………………………..……………………………………………………………
3-1
Unpacking & Inspecting ……..……………………………………………………………………………………….
3-2
Lifting …………………………………………..………………………………………………………………….………….
3-3
Illustration: Lifting Points …………………………………………………………………….…………….
3-5
Removing Shipping Bracket …………………………..……………………………………………….……………
3-6
Cleaning …………………………………………..…………………………………………………………….……………
3-6
Installing …………………………...………………………………………………………………………….…………….
3-6
Supplying Hydraulic Oil …………………………………………………………………….…………….
3-6
Supplying Coolant ………..………………………………………………………………….……………..
3-7
Connecting Electric Power ……………………………………………………………….……………..
3-7
Leveling & Anchoring …………………………………………………………………….……………….
3-8
Installing Roller Table (Optional) ………………………………………………….………………….
3-9
Installing Fire Control Device ………………………………………………….………………………
3-9
Relocating ………………………...…………………………………………………………………….………………….
3-9
Section 4 –Operating Instructions
4-1
Safety Precautions …………………..…………………..……………………………………….…………………….
4-2
Before Operating …………………………..…………………………………………………………………………….
4-3
Control Panel ……..……………………………………..………………………………………….…………………….
4-4
Unrolling & Installing the Blade …………………………………………………………………….…………….
4-7
Selecting Blade Speed ………………………..……..………..………………………………………………………
4-9

ii
Table of Contents
Adjusting Blade Speed ………..………..…………………………………………………………………………….
4-9
4 Speed Step Pulley …………………………………………………………………………………………
4-9
Variable Stepless Pulley Drive …………………………………………………………………………
4-10
Angle Cutting ………..………..………………………………….……………………………………………………….
4-10
Adjusting Feed Rate (Cutting Pressure) ……………………………………………………………………….
4-11
Adjusting Vise ………..………..…………………………………………………………………..…………………….
4-11
Adjusting Wire Brush ………..……………………………………………………………………….……………….
4-12
Adjusting Saw Arm ………………………………..…………………………………………………………………….
4-12
Cutting Irregular Cross Section ……..…….……………………………………………………………..……….
4-12
Adjusting Coolant Flow ………..………..…………………………………………………………………..……….
4-13
Installing Material Stop Bracket …………………………………………………………………………………..
4-13
Adjusting Horizontal Stop Spring Cushion ……………………………………………………………………
4-14
Section 5 –Electrical System
5-1
Electrical Circuit Diagrams ……….…………………..……………………………………………………………..
5-1
Section 6 –Hydraulic System
6-1
Hydraulic Diagrams ……….…………………..………………………………………………………………………..
6-1
Section 7 –Bandsaw Cutting: A Practical Guide
7-1
Introduction ……………………….…….…………………..…………………………………………………………….
7-2
Saw Blade Selection ………………….…………………..……………………………………………………………
7-2
VISE LOADING …………….…………………..………………………………………….………………………………
7-3
BladeBreak -In …………………………………………………………………………………….……………………..
7-4
Section 8 –Maintenance & Service
8-1
Introduction ……………………….…….……….…………..…………………………………………………………..
8-1
Basic Maintenance …..……………….…………………..…………………………………………….……………..
8-1
Maintenance Schedule …..………….…………………..…………………………………………………………..
8-2
Before Beginning a Day’s Work ….……………………………………………………………………
8-2
After Ending a Day’s Work …………..………………………………………….………………………
8-2
Every 2 weeks ……………………………………………………………………….……………………….
8-2
First 600hrs for new machine,then every 1200h…………………….……………………….
8-2
Every Six Months ……………….……….………………………………………….………………………
8-3
Storage Conditions …………………………....…………..…………………………………………………………..
8-3
Terminating the Use of Machine ……..……………..…………………………………………………………..
8-3
Oil Recommendation for Maintenance …………..…………………………………………………………..
8-4

iii
Table of Contents
Section 9 –Troubleshooting
9-1
Introduction ……………………….…….………………………………………………………………………………..
9-1
Precautions ………………….…………………..…………….………………………………………………………....
9-2
General Troubles & Solutions ………………………..….………………………………………………………..
9-2
Minor Troubles & Solutions ………………………..……..…………………………………………..…………..
9-3
Motor Troubles & Solutions ………………………..………..…………………………………………..………..
9-3
Blade Troubles & Solutions ………………………..………………………………………………………………..
9-4
Sawing Problems & Solutions ………………………..………….………………………………………………..
9-5
Re-Adjusting the Roller Table ………………………..……………..……………………………………………..
9-12
Section 10 –Parts
10-1
Spare Parts Recommendations …………………..…………………..…………………………………………..
10-1
Part List …………………..…………………..……………………………………………………………………………..
10-2
Section 11 –Warranty
11-1
Warranty………………………………….…………………..……………………………………………………………..
11-1

