Cosori C0171-GK User manual

1
Model No.: C0171-GK
Electric Glass Kettle
Questions or Concerns?
Mon - Fri 9:00 AM - 5:00 PM PST
[email protected] | [phone]
ORIGINAL

3
WITH HEARTFELT THANKS
Thank you for purchasing a new CO171-GK Original Electric Glass Kettle.
We’re excited to see what you’ll serve up!
We’re looking forward to preparing many fresh meals with you. When we say
“with you,” we mean it—our helpful Customer Support Team is ready to answer
questions at [email protected]. We’re here to lend an ear to your questions
and concerns (or your joy over a successful recipe). Happy cooking!

4
Table of Contents
Package Contents
Specifications
Package Contents
Specifications
Keeping Things Safe
Getting to Know Your Kettle
How Does It Work?
• Before First Use
• Boiling Water
Care & Maintenance
• General Cleaning
• Descaling the Kettle
Warranty Information
Customer Support
1 x CO171-GK Original Electric Glass Kettle
1 x Power Base
1 x User Manual
4
4
5
7
8
8
9
10
10
10
11
12
Voltage 120V / 60Hz
Rated Power 1500W
Capacity 1.8 qt (1.7 L)

5
KEEPING THINGS SAFE
IMPORTANT SAFEGUARDS: Please read, understand, and comply with
all the instructions provided in this manual before using this device. Failure to
comply with the instructions given in this manual and/or using this device in
ways other than the ones mentioned in this manual may result in serious injury
and/or damage to the product.
General Safety
Read all instructions in this manual
before using the product.
• DO NOT allow children to use
or play with this appliance.
Always keep this kettle and its
components out of reach from
children.
• DO NOT use the kettle if the
kettle is malfunctioning, if it is
broken or chipped, or if the power
cord or plug is damaged in any
way. Immediately discontinue use
and contact Customer Support
(page 12).
• Always unplug the kettle while it
is not in use.
• This appliance is for indoor use
ONLY.
Use & Care
• Always place the kettle on a dry,
flat surface.
• DO NOT place the kettle on or
near heat sources such as stove
tops, ovens, radiators, etc.
• This appliance is only meant to
boil water. DO NOT put any other
liquids inside the kettle.
• DO NOT turn on the kettle while
the lid is open.
• DO NOT cover the opening of the
kettle while it is operating. Doing
so may result in damage to the
kettle.
• Only use this appliance for its
intended purpose as described in
this manual.
• Use the appliance with the
specified voltage (120V / 60Hz).
• DO NOT touch the base
or the glass portions of the
kettle while the appliance
is operating or immediately
after operation. These
components will be hot and
may cause burns or other
personal injury.
• DO NOT fill the kettle above
the MAX line. Doing so may
cause the water to boil over
during operation and may
result in scalding.
• Always handle with care
when there is hot water
inside the kettle. Failure to
do so may result in burns or
scalding.
CAUTION!

6
• DO NOT cover the slits near the
On/Off Switch. Doing so will
prevent the kettle from operating
properly.
• This appliance implements a
dry-run safety feature. If there is
no water inside the kettle during
operation, it will automatically
turn off to prevent the heating
plate from overheating. If the
kettle overheats, fill it with cold
water and wait 2 minutes before
resuming use.
• Always empty and clean the
kettle after each use. If necessary,
descale the kettle by following
the instructions in Descaling the
Kettle (page 10).
• DO NOT immerse the kettle or
base in water or other liquids.
• DO NOT attempt to repair this
appliance if it is broken. Doing so
may result in further damage or
personal injury and will void your
warranty.
• DO NOT attempt to use this kettle
or its base with other components
from other electric kettle brands.
Doing so will void your warranty.
KEEPING THINGS SAFE (cont.)
SAVE THESE
INSTRUCTIONS

7
GETTING TO KNOW YOUR KETTLE
1. Filter
2. Spout
3. Lid
4. Kettle
5. Heating Plate
1
3
8
10
9
7
4
6
5
2
6. Indicator Light
7. Power Base
8. Lid Release Button
9. Handle
10. On/Off Switch

8
HOW DOES IT WORK?
Before First Use
This process is meant to test if the
kettle is working properly. DO NOT
drink the water that was boiled during
this initial test.
1. Remove all parts from the
package and carefully inspect
each part.
2. Completely unravel the power
cable, then place the power base
on a flat, level surface.
3. Press the Lid Release Button to
open the lid. [ Figure 1.1 ]
4. Fill the kettle with water to the
MAX line then close the lid.
Place the kettle onto the power
base and plug the power base
into a powered electrical outlet.
[ Figure 1.2 ]
5. Press the On/Off Switch to turn
on the kettle. The blue indicator
light will turn on. [ Figure 1.3 ]
6. The kettle will automatically turn
off once it has finished boiling
the water. Allow it to cool for at
least 5 minutes, then pour out
the water.
Figure 1.1
Figure 1.2
Figure 1.3
DO NOT remove the glass
kettle from the package if it
is broken. Contact Customer
Support immediately to replace
your kettle.
CAUTION!

9
Boiling Water
DO NOT attempt to boil other liquids
in this appliance. This kettle is only
suitable for boiling water.
1. Press the Lid Release Button to
open the lid.
2. Fill the kettle to the desired level.
Remember to not go above the
MAX line. [ Figure 2.1 ]
3. Close the lid and place the kettle
onto the power base. Connect
the plug to a powered electrical
outlet. [ Figure 2.2 ]
4. Press the On/Off Switch to turn
on the kettle. The blue indicator
light will turn on. The kettle will
automatically turn off once it
has finished boiling the water.
[ Figure 2.3 ]
NOTE:
• You can stop the heating process at any
time by pressing the
On/Off Switch while the kettle is
operating.
• DO NOT attempt to boil other liquids
in this appliance. This kettle is only
suitable for boiling water.
• Make sure to fill the kettle with water to
at least the “0.50L” line. Failure to do so
may cause the heating plate to overheat.
• If the kettle overheats, fill it with cold
water and wait 2 minutes before
resuming use.
Figure 2.1
Figure 2.2
Figure 2.3

10
CARE & MAINTENANCE
General Cleaning Descaling the Kettle
It is recommended to clean the kettle
after each use.
1. Unplug the power base from the
electrical outlet.
2. Allow the kettle to completely
cool, then pour out any
remaining water.
3. Wash the kettle with warm,
soapy water. Dry it thoroughly
with a clean, dry cloth.
It is important to descale the kettle
at least once a week if it is being used
frequently. Descaling removes any
mineral deposits that have built up
inside the kettle. Always descale the
kettle after it has been stored for long
periods of time or before storing it.
1. Unplug the power base from the
electrical outlet.
2. Allow the kettle to completely
cool, then pour out any
remaining water.
3. Wipe the interior of the kettle
with a soft cloth to remove any
excess moisture.
4. Fill the kettle with 4 cups of
distilled vinegar and 2 cups of
water.
5. Place the kettle onto the power
base, then plug the power base
into an electrical outlet.
6. Boil the solution in the kettle 2-3
times.
7. Pour out the solution, rinse the
kettle with clean water, and dry
with a soft cloth.