Cosori CO171-GK2 User manual

Model: CO171-GK2
Original Electric Glass Kettle
User Manual
Questions or Concerns?
Des questions ou des préoccupations ?
Mon—Fri, 9:00 am—5:00 pm PST/PDT
[email protected] | [phone]
EN FR

2
Table of Contents Package Contents
1 x Electric Glass Kettle
1 x Power Base
1 x User Manual
Power Supply AC 120V, 60Hz
Rated Power 1500W
Capacity 1.7 L / 7 US cups
Dimensions 22.0 x 15.5 x 24.1 cm /
8.7 x 6.1 x 9.5 in
Weight 1.2 kg / 2.6 lb
Package Contents
Specifications
Important Safeguards
• Plug & Cord
Getting to Know Your Glass Kettle
Before First Use
• Water Test
Using Your Glass Kettle
• Boiling Water
Care and Maintenance
• Cleaning
• Descaling the Kettle
Warranty Information
Customer Support
Specifications
2
2
5
5
6
7
7
8
8
9
9
9
10
11
ENGLISH
EN

3
FRANÇAIS
FR
Table des matières Contenu de l’emballage
1 bouilloire électrique en verre
1 socle
1 guide d’utilisation
Alimentation
électrique
120V c.a., 60Hz
Puissance
nominale
1500W
Capacité 1,7L/7tasses US
Dimensions 22,0x15,5x24,1cm/
8,7x6,1x9,5po
Poids 1,2 kg / 2,6 lb
Contenu de l’emballage
Caractéristiques techniques
Mises en garde importantes
• Fiche et cordon
d’alimentation
Prise en main de votre bouilloire
en verre
Avant la première utilisation
• Test de l’eau
Mode d’emploi de votre bouilloire
en verre
• Porter l’eau à ébullition
Entretien et maintenance
• Nettoyage
• Détartrage de la bouilloire
Informations relatives à la
garantie
Service à la clientèle
Caractéristiques techniques
3
3
14
15
16
17
17
18
18
19
19
19
20
21

4
(We hope you love your new glass kettle as much as we do.)
Our helpful, in-house chefs are ready to assist
you with any questions you might have!
On behalf of all of us at Cosori,
CONTACT OUR CHEFS
Email: [email protected]
Toll-Free: [phone]
M–F, 9:00 am—5:00 pm PST/PDT
explore
explore our recipe gallery
www.cosori.com/recipes
join
join the Cosori Cooks Community on Facebook
facebook.com/groups/cosoricooks
enjoy
enjoy weekly, featured recipes
made exclusively by our in-house chefs

5
Always follow basic safety precautions when using your kettle.
Read all instructions.
• Do not immerse the kettle, base,
cord, or plug in water or other liquids.
• Closely supervise children near the
kettle. Do not allow children to use
or play with this kettle.
• Unplug the kettle when it is not
being used and before cleaning. This
will avoid electric shock and prevent
moisture from causing a short
circuit in the power base while it is
plugged in.
• Allow to cool before putting on or
taking o parts, and before cleaning.
• Do not use the kettle if it is
malfunctioning, broken or chipped,
or if the power cord or plug is
damaged in any way. Do not try to
repair the kettle. Contact Customer
Support (see page 10).
• Using accessory attachments not
recommended by the manufacturer
may result in fire, electric shock, or
injury.
Plug & Cord
• Do not let the cord (or any
extension cord) hang over the edge
of a table or counter. Do not allow
the cord to touch hot surfaces.
• This kettle has a 3-prong grounding
plug. Always plug in to a grounded
electrical outlet. Do not modify the
plug in any way.
• This kettle uses a short power-
supply cord to reduce the risk
of entangling or tripping. Use
extension cords with care.
• Any extension cord must also be a
grounding-type 3-wire cord.
• The marked electrical rating of an
extension cord should be at least
as high as the rating of the kettle
(see page 2).
• Do not use outdoors.
• Place the kettle on a dry, flat surface.
Do not place the kettle on or near
heat sources such as stovetops,
ovens, radiators, etc.
• Always make sure the lid is closed
while the kettle is operating. Do not
cover the spout opening while the
kettle is operating. Do not cover the
slits near the On/O Switch.
• To disconnect, use the On/O
Switch to turn the kettle o, then
remove the plug from the wall outlet.
• Only use the kettle as directed in this
manual.
• Household use only.
• Do not touch hot surfaces.
Use handle. Do not touch the
base or glass parts of the kettle
during or immediately after
operation.
• Do not fill the kettle above the
“MAX“ line. This may cause
water to boil over and may
cause scalding.
• Always handle with care when
there is hot water inside the
kettle to avoid scalding.
CAUTION!
READ AND SAVE THESE INSTRUCTIONS
IMPORTANT SAFEGUARDS

6
A
C
H
J
I
G
D
F
E
B
A. Filter
B. Spout
C. Lid
D. Kettle
E. Heating Plate
F. Indicator Light
G. Power Base
H. Lid Release Button
I. Handle
J. On/O Switch
Note:
• The filter is made with food-grade stainless steel.
GETTING TO KNOW YOUR GLASS KETTLE

7
Water Test
Perform the Water Test before using your
kettle to make sure it’s working properly. Do
not drink the water that is boiled during this
test.
1. Remove all packaging from your kettle
and its accessories, including any
temporary stickers.
2. Completely unravel the power cable
and place the power base on a flat, level
surface.
3. Press the Lid Release Button to open
the lid. [Figure 1.1]
4. Fill the kettle with water to the “MAX”
line, then close the lid. [Figure 1.2] Place
the kettle onto the power base and plug
in.
5. Press the On/O Switch. The blue
indicator light will turn on. [Figure 1.3]
6. The kettle will automatically turn o
once it has finished boiling the water.
Allow it to cool for at least 5 minutes,
then pour out the water.
Figure 1.1
Figure 1.2
Figure 1.3
Do not remove the glass kettle from
the package if it is broken. Contact
Customer Support immediately to
replace your kettle (see page 10).
CAUTION!
BEFORE FIRST USE

8
Figure 2.3
Boiling Water
Do not boil other liquids in this kettle. This
kettle should only be used for boiling water.
1. Press the Lid Release Button to open
the lid.
2. Fill the kettle to the desired level. Do
not fill above the “MAX” line. [Figure
2.1]
3. Close the lid and place the kettle onto
the power base and plug in. [Figure 2.2]
4. Press the On/O Switch. The blue
indicator light will turn on. [Figure 2.3]
5. The kettle will automatically turn o
once it has finished boiling the water.
Figure 2.1
Figure 2.2
Note:
• Always fill the kettle with water to at least the
“MIN” line to prevent overheating.
• You can stop the heating process by flipping
the On/O Switch back up while the kettle
is operating.
• This kettle has a dry-run safety feature. If
there is no water inside the kettle, it will
automatically turn o to prevent the heating
plate from overheating.
• If the kettle overheats, fill it with cold water
and wait for 2 minutes before using again.
USING YOUR GLASS KETTLE

9
Cleaning
Descaling the Kettle
1. Unplug the kettle and allow it to cool
before cleaning.
2. Wipe the kettle and base with a soft,
damp cloth. Make sure that the electric
socket on the underside of the kettle is
kept dry.
3. Dry all parts after every use.
You should descale the kettle at least once
a week if you use it frequently. Descaling
removes any mineral deposits that have
built up inside the kettle. Always descale
the kettle before and after storing for long
periods of time.
1. Unplug the kettle and pour out all
water. Make sure the kettle is cool.
2. Squeeze half a lemon into the kettle,
or add 118 mL / ½ US cup of distilled
vinegar into the kettle.
3. If the kettle has thick scale buildup,
scrub the kettle’s inner walls with a
non-scratch scrub sponge.
4. Add 473 mL / 2 US cups of water. Boil
the mixture.
5. Pour out the mixture, then wipe o any
remaining scale with a non-abrasive
cloth, sponge, or cleaning brush.
6. Repeat as needed.
Note:
Never immerse kettle or power base in
water.
Note: Do not remove the filter from the lid. Doing
so will break the filter.
Note: For quick descaling, add 44 mL / 3 US tbsp
of baking soda to 118 mL / ½ US cup of vinegar
into the kettle. Swirl the mixture around until it
coats the walls of the kettle, wipe with a non-
scratch sponge, and pour the mixture out. This
method will only work for a thin layer of scale.
Note: Do not use steel wool, as this can scratch
the kettle.
CARE AND MAINTENANCE

10
Product Name Original Electric
Glass Kettle
Model CO171-GK2
For your own reference, we strongly
recommend that you record your order ID and
date of purchase.
Order ID
Date of Purchase
WARRANTY INFORMATION
TERMS & POLICY
Arovast Corporation (“Arovast”) warrants this
product to the original purchaser to be free from
defects in material and workmanship, under
normal use and conditions, for a period of 2 years
from the date of original purchase.
Arovast agrees, at our option during the warranty
period, to repair any defect in material or
workmanship or furnish an equal product in
exchange without charge, subject to verification
of the defect or malfunction and proof of the date
of purchase.
There is no other express warranty. This warranty
does not apply:
• If the product has been modified from its
original condition;
• If the product has not been used in
accordance with directions and instructions
in the user manual;
• To damages or defects caused by accident,
abuse, misuse or improper or inadequate
maintenance;
• To damages or defects caused by service
or repair of the product performed by an
unauthorized service provider or by anyone
other than Arovast;
• To damages or defects occurring during
commercial use, rental use, or any use for
which the product is not intended;
• To damages or defects exceeding the cost of
the product.
Arovast will not be liable for indirect, incidental,
or consequential damages in connection with the
use of the product covered by this warranty.
This warranty extends only to the original
consumer purchaser of the product and is not
transferable to any subsequent owner of the
product regardless of whether the product is
transferred during the specified term of the
warranty.
This warranty does not extend to products
purchased from unauthorized sellers. Arovast’s
warranty extends only to products purchased
from authorized sellers that are subject to Arovast’s
quality controls and have agreed to follow its
quality controls.
All implied warranties are limited to the period of
this limited warranty.
This warranty gives you specific legal rights
and you may also have other rights which vary
from state to state. Some states do not allow
the exclusion or limitation of incidental or
consequential damages, so the above limitation or
exclusion may not apply to you.
If you discover that your product is defective
within the specified warranty period, please
contact Customer Support via support@cosori.
com. DO NOT dispose of your product before
contacting us. Once our Customer Support Team
has approved your request, please return the
product with a copy of the invoice and order ID.
This warranty is made by:
Arovast Corporation
1202 N. Miller St. Suite A
Anaheim, CA 92806
USA