
Always follow basic safety
precautions when using your
kettle. Read all instructions.
• Do not immerse the kettle, base,
cord, or plug in water or other
liquids.
• Unplug the kettle when it is not
being used and before cleaning.
This will avoid electric shock and
prevent moisture from causing
a short circuit in the power base
while it is plugged in.
• Allow to cool before putting on
or taking o parts, and before
cleaning.
• Do not use the kettle if it is
malfunctioning, broken or
chipped, or if the power cord or
plug is damaged in any way.
Do not try to repair the kettle.
Contact Customer Support (see
page 11).
• Using accessory attachments
not recommended by the
manufacturer may result in fire,
electric shock, or injury.
• Do not use outdoors.
• Place the kettle on a dry, flat
surface. Do not place the kettle
on or near heat sources such as
stovetops, ovens, radiators, etc.
• Always make sure the lid is closed
while the kettle is operating.
Do not cover the spout opening
while the kettle is operating.
Do not cover the slits near the
On/O Switch.
• To disconnect, use the On/O
Switch to turn the kettle o, then
remove the plug from the wall
outlet.
• This kettle is only to be used with
the base provided.
• This kettle is not intended for use
by persons (including children)
with reduced physical, sensory
or mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision
or instruction concerning use of
the kettle by a person responsible
for their safety.
• Children should be supervised to
ensure that they do not play with
the kettle.
• Do not touch hot surfaces.
Use handle. Do not touch
the base or glass parts of the
kettle during or immediately
after operation.
• Do not fill the kettle above
the “MAX“ line. This may
cause water to boil over and
may cause scalding.
• Always handle with care
when there is hot water
inside the kettle to avoid
scalding.
CAUTION!
IMPORTANT SAFEGUARDS
READ AND SAVE THESE INSTRUCTIONS
EN
5