Cosori CDK-SE151-KUS User manual

Double-Wall Stainless Steel Electric Kettle
Model: CDK-SE151-KUS
User Manual
Questions or Concerns?
Mon–Fri, 9:00 am–5:00 pm PST/PDT
[email protected] | [phone]

2
Our helpful, in-house chefs are ready to assist you
with any questions you might have!
CONTACT OUR CHEFS
Email: [email protected]
Toll-Free: [phone]
Mon–Fri, 9:00 am—5:00 pm PST/PDT
join the Cosori Cooks Community on Facebook
facebook.com/groups/cosoricooks
explore our recipe gallery
www.cosori.com/recipes
enjoy weekly, featured recipes
made exclusively by our in-house chefs
(We hope you love your new electric kettle as much as we do.)
Thank you for
your purchase!
On behalf of all of us at Cosori,
Happy cking!

3
Table of Contents Package Contents
Specifications
Package Contents
Specifications
Important Safeguards
Getting to Know Your Electric Kettle
Before First Use
Using Your Electric Kettle
Care & Maintenance
Warranty Information
Customer Support
3
3
4
6
7
8
9
10
11
Power Supply AC 120V, 60Hz
Rated Power 1500W
Capacity 1.6 qt / 1.5 L
Dimensions 9.1 x 6.3 x 10.2 in /
23.2 x 15.9 x 25.8 cm
Weight 2.51 lb / 1.14 kg
1 x Double-Wall Stainless Steel Kettle
1 x Power Base
1 x User Manual

4
IMPORTANT SAFEGUARDS
Always follow basic safety precautions when using your kettle.
Read all instructions.
General Safety
• Caution: Do not touch hot
surfaces. Use handle. Do not
touch the base or metal walls of
the kettle during or immediately
after operation.
• CAUTION: Do not fill the kettle
above the “MAX” line. This may
cause water to boil over and may
cause scalding.
• CAUTION: Always handle with
care when there is hot water
inside the kettle to avoid scalding.
• Closely supervise children near
the kettle. Do not allow children to
use or play with this kettle.
• Children should not clean or
perform maintenance on the
kettle without supervision.
• Do not immerse the kettle, base,
cord, or plug in water or other
liquids.
• Unplug the kettle when it is not
being used and before cleaning.
This will avoid electric shock and
prevent moisture from causing
a short circuit in the power base
while it is plugged in.
• Allow to cool before putting on
or taking o parts, and before
cleaning.
READ AND SAVE THESE INSTRUCTIONS
• Do not use the kettle if it is
malfunctioning, or if the kettle,
base, power cord or plug is
damaged in any way. Do not try to
repair the kettle. Contact Customer
Support (see page11).
• Using accessory attachments not
recommended by Cosori may
result in fire, electric shock, or
injury.
• Only use the kettle with the base
provided. Do not use the base for
anything other than its intended
use.
• Do not use outdoors.
• Place the kettle on a dry, flat
surface. Do not place the kettle
on or near heat sources such as
stovetops, ovens, radiators, etc.
• Do not turn on the kettle while the
lid is open.
• Always make sure the lid is closed
while the kettle is operating. If the
lid is lifted during boiling, scalding
may occur.
• Do not cover the spout opening
while the kettle is operating.
• Do not cover the slits near the
On/O Switch.
• Use caution when refilling or
moving the kettle while it is still
hot.

5
Power and Cord
• Do not let the cord (or any
extension cord) hang over the
edge of a table or counter where
it can be pulled on by children
or tripped over. Do not allow the
cord to touch hot surfaces.
• Your kettle has a polarized plug
(one prong is wider than the
other), which fits into a polarized
outlet only one way. This is a
safety feature to reduce the risk of
electric shock. If the plug does not
fit, reverse the plug. If it still does
not fit, do not use the plug in that
outlet. Do not bypass this safety
feature.
• This kettle uses a short power-
supply cord to reduce the risk
of entangling or tripping. Use
extension cords with care.
• The marked electrical rating of an
extension cord should be at least
as high as the rating of the kettle
(see page 3).
• If the power supply cord is
damaged, it must be replaced by
Arovast Corporation or similarly
qualified persons in order to avoid
an electric or fire hazard. Please
contact Customer Support
(see page 11).
• Your kettle should only be used
with 120V, 60Hz electrical
systems. Do not plug into another
type of outlet.
SAVE THESE INSTRUCTIONS
• While water is boiling, or just
after water has been boiled, avoid
contact with steam from the
spout.
• Always pour boiling water slowly
and carefully. Avoid tipping the
kettle too quickly.
• To disconnect, use the On/O
Switch to turn the kettle o, then
remove the plug from the outlet.
• Only use the kettle as directed in
this manual.
• This kettle is not to be used by
persons (including children)
with reduced physical, sensory,
or mental capacities, or lack of
experience and knowledge, unless
they have been given supervision
or instruction concerning the
use of the kettle by a person
responsible for their safety.
• Not for commercial use.
Household use only.

6
GETTING TO KNOW YOUR
ELECTRIC KETTLE
A. Lid
B. Lid Release Button
C. Handle
D. Indicator Light
B
C
E
F
G
D
A
E. On/O Switch
F. Power Base
G. Spout

7
BEFORE FIRST USE
Water Test
CAUTION: Do not use the kettle if it is
damaged. Contact Customer Support to
replace your kettle (see page 11).
Perform the water test before using your
kettle to make sure it’s working properly.
Do not drink the water that is boiled
during this initial test.
1. Remove all packaging from your
kettle and its accessories, including
any temporary stickers.
2. Completely unravel the power cable
and place the power base on a flat,
level surface.
3. Press the Lid Release Button to open
the lid. [Figure 1.1]
4. Fill the kettle with water to the “MAX”
line, then close the lid. [Figure 1.2]
Place the kettle onto the power base.
Plug in.
5. Press the On/O Switch. The blue
indicator light will turn on.
[Figure 1.3]
6. The kettle will automatically turn o
once it has finished boiling the water.
Allow it to cool for at least 5 minutes,
then pour out the water.
Figure 1.2
Figure 1.1
Figure 1.3

8
USING YOUR ELECTRIC KETTLE
Boiling Water
Do not boil other liquids in this kettle. This
kettle should only be used for boiling water.
1. Press the Lid Release Button to open
the lid.
Note:
• The minimum amount of water needed for
boiling is 2.1 US cups / 0.5 L.
• You can stop the heating process by flipping
the On/O Switch back up while the kettle
is operating.
• This kettle has a dry-run safety feature. If
there is no water inside the kettle, it will
automatically turn o to prevent the heating
plate from overheating.
• If the kettle overheats, fill it with cold water
and wait for 2 minutes before using again.
Note: Pressing the button opens the lid to a 45°
angle. For filling, manually lift the lid to an 80°
angle. [Figure 2.1]
Figure 2.2
Figure 2.1
Figure 2.3Figure 2.4
2. Fill the kettle to the desired level. Do not
fill above the “MAX” line. [Figure 2.2]
3. Close the lid and place the kettle onto the
power base. Plug in. [Figure 2.3]
4. Press the On/O Switch. The blue
indicator light will turn on. [Figure 2.4]
5. The kettle will automatically turn o once
it has finished boiling the water.
45°
80°

9
Cleaning
1. Unplug the kettle and allow it to cool
before cleaning.
2. Wipe the kettle and base with a
soft, damp cloth. Make sure that the
electric socket on the underside of the
kettle is kept dry.
3. Dry all parts after every use.
Note: Never immerse kettle or power base
in water.
CARE & MAINTENANCE
Descaling the Kettle
You should descale the kettle at least once
a week if you use it frequently. Descaling
removes any mineral deposits that have
built up inside the kettle. Always descale
the kettle before and after storing for long
periods of time
1. Unplug the kettle and pour out all
water. Make sure the kettle is cool.
2. Squeeze half a lemon into the kettle,
or add ½ US cup / 118 mL of distilled
vinegar into the kettle.
3. If the kettle has thick scale buildup,
scrub the kettle’s inner walls with a
non-scratch scrub sponge.
Note: Do not use steel wool, as this can
scratch the kettle.
Note: For quick descaling, add 3 US tbsp /
44 mL of baking soda to ½ US cup / 118 mL
of vinegar into the kettle. Swirl the mixture
around until it coats the walls of the kettle,
wipe with a non-scratch sponge, and pour
the mixture out. This method will only work
for a thin layer of scale.
4. Add 2 US cups / 473 mL of water. Boil
the mixture.
5. Pour out the mixture, then wipe o
any remaining scale with a non-
abrasive cloth, sponge, or cleaning
brush.
6. Repeat as needed.