Costway EP24966US User manual

www.costway.com
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Visit us: www.costway.com
Follow Costway
Please give us a chance to make it right and do better！
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP!
USER’S MANUAL
52" Ceiling Fan Lamp
EP24966US

www.costway.com
Contact Us!
Do NOT return this item.
Contact our friendly customer service department for help first.
E-mail
US: [e-mail]
UK: [e-mail]
Before You Start
Please read all instructions carefully.
Retain instructions for future reference.
Separate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near to the
area in which they will be placed in use, to avoid moving the product
unnecessarily once assembled.
Always place the product on a flat, steady and stable surface.
Keep all small parts and packaging materials for this product away from
babies and children as they potentially pose a serious choking hazard.
02

www.costway.com
the
Operation
installation.
The structure
3
4
5
6
7
8
9
10
11
03

www.costway.com
04
17.86Ib
8.1KG
22.16Ib
10.05KG 3.75KG
considered as a defect.
receipt as proof

www.costway.com
Wooden Bead String A
(30PCS) G
I
J
Wooden Bead String B
H
05

www.costway.com
06

www.costway.com
07

www.costway.com
08

www.costway.com
09

www.costway.com
Reverse
1.Choose an E12 bulb with appropriate power
and screw it onto the lamp holder .
2.According to the picture on the left, hang the
wooden beads A and B on the lamps in order.
10

www.costway.com
11
Ensure all motor housing screws are snug.
Ensure the screws that attach the fan blade bracket to the motor hub are tight.
Ensure the wire nut connetions are not rattling against each other or the interior wall of the switch housing.
Allow a 24-hour "breaking in" period. Most noises associated with a new fan disappear during this time.
If you are using the Ceiling Fan light kit,ensure the screws securing the glassware are tight.
Check that the light bulbs are also secure.
Ensure the canopy is at a short distance from the ceiling.lt should not touch the ceiling.
Ensure your outlet box is secure and rubber isolator pads were used between the mounting plate and outlet box.
Check that all blade and blade arm screws are secure.
Most fan wobble problems are caused when blade levels are unequal.
Check this level by selecting a point on the ceiling above the tip of one of the blades.
Measure from a point on the center of each blade to the point on the ceiling. Measure this distance.
Rotate the fan until the next blade is positioned for measurement.
Repeat for each blade.Any measurement deviation should be within 1/8 in.
Run the fan for ten minutes.lf the fan continues too wobble please contact Customer Service and a balancing
kit will be sent to you

www.costway.com
Welcome to visit our website and purchase our quality products!
We would like to extend our hearelt thanks to
all of our customers for taking me to assemble
this product and giving us valuable feedbacks.
With your inspiring rating, COSTWAY will be more consistent to offer you
EASY SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!
US office: Fontana, California
UK office: Ipswich
www.costway.com
Reward Points
Exclusive Customer Service
Personalized Recommendaons
Permanent Shopping Cart
Order History
12