1. Open the Lid and remove any packaging contents.
2. Place the Towel Warmer on a dry, level, hard surface.
3. Insert Plug into a standard 120V outlet.
*NOTE: This Towel & Blanket Warmer has a 3-prong grounding
plug. To reduce the risk of electric shock, plug the power cord into a
grounded (earthed) electrical outlet that is easily accessible.
SET UP
1. Use cotton or cotton blend towels or fabrics.
2. For fast and even heating, loosely pile 1 towel into the Towel &
Blanket Warmer. Tightly rolled or folded towels will take longer to
heat thoroughly. Two towels will take longer to heat than one.
3. Use only with DRY fabrics.
Note: Do NOT use damp or wet articles.
4. Avoid using delicate fabrics that cannot withstand high heat. Any
fabric indicating that a cool iron must be used may not be able to
withstand the heat of the towel warmer, resulting in damage to the
fabric and the Towel & Blanket Warmer.
5. Once the heating cycle has begun, keep the lid closed. This will
prevent heat from escaping. Opening the lid mid-cycle may result in
slower heating times.
*Note: Condensation on the lid and interior of the unit is normal.
TIPS FOR BEST RESULTS
REMOVE THE POWER CORD FROM THE ELECTRICAL OUTLET
BEFORE CLEANING. WIPE WITH A DRY CLOTH ONLY WHEN
UNIT IS COOL TO THE TOUCH.
Rated Voltage ……………………………………………………120VAC
Frequency …………………………………………………………60Hz
Wattage Max ……………………………………………………… 450W
Net weight ………………………………………………………… 3.3kg
Gross weight ……………………………………………………… 4.8kg
Product Size ………………………………………… 330*336*476mm
CARE AND MAINTENANCE
SPECIFICATIONS
1. Insert the power cord into an electrical outlet.
2. Open the LID and place ONLY DRY towel(s) or blanket inside.
*NOTE: Placing damp or wet towels inside the towel warmer can
damage the unit and pose serious safety risks.
3. Close the LID.
4. Press the ON/OFF BUTTON.
5. Please do not touch the inner wall of the product, otherwise there
will be a risk of scalding; the temperature of the barrel will reach
266+/- 46.4 ℉(130+/-8° ℃) in about 5 minutes, and the temperature
can be maintained at this temperature for about 15 minutes. At this
time, the temperature of the towel can reach more than 122°F/50 ℃,
which is human contact. A relatively warm and comfortable
temperature; and the towel bucket is indirectly heated and keeps the
towel temperature around 131°F/55 ℃. One hour after starting the
machine, the work indicator light goes out, that is, the product has
completed a work cycle.
6.15 minutes is typically sufficient for heating 2 bath towels.
*Note: The Towel Warmer could reach approximately 266°F/130°C
and remain hot for the duration of the heating cycle.
7. Open LID to remove towel(s) or blanket.Press down on the
handle of the lid and then pull up to open the lid of the product.
*Note: To avoid damage to the unit, gently raise the lid when
removing items.
8. Press the ON/OFF BUTTON at any time to stop or start the
heating cycle.
9. The unit will automatically turn off after 60 minutes.
USING THE TOWEL & BLANKET WARMER
10 11
