Costway TP10051 User manual

Kids Kitchen Cart
TP10051
USER’S MANUAL
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Before You Start
Warning for Assembly
Assembled only by adults
Remove all Packaging, separate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near the area in
which they will be placed in use, to avoid moving the product unnecessarily once
assembled.
Ensure a secure surface during installation, and place the product always on a flat,
steady and stable surface.
General Security Warning
Caution: The Product is not suitable for the children under 3 years
Danger: Keep all small parts and packaging materials for this product away from babies
and children, otherwise they may pose a choking hazard.
Danger: Lack of attachment may cause a risk of tipping.
WARNING:
CHOKING HAZARD-Small parts.
Not for children under 3 years.
0-3
Please read all instructions carefully and keep it for future reference.
02

Bx1 Cx2 D x2 E x2
Fx2 G x2 H x2 I x1
Ax1
Jx2
Kx2 L x1 M
x1 N x1 Ox2
Px1 Q
x2 R x2 S x2 Tx2
Ux2 Vx6 W
x26 Xx2
6x16 M6x16 M6x30 M4x8
M5x23 M4x45 M4x35 M3x28
x1 x4 x2 x1 x1
03

A
QX2
CX2
RX2
SX2
EN:
Assemble the wheels C on
the board A, and fix the
wheels C with screws S,
bushings Q and nuts R.
01
EN:
Assemble boards
D, E and F with
screws V and W
based on the
assembly in step 1.
02
EN:
Install boards G on the
basis of the assembly in
step 2.
03
EX2
DX2
FX2
WX6
VX2
step 1
G
x2
Step 2
04

EN:
Connect boards H with
wooden stick I with the
screws W.
04
Hx2
I
WX2
EN:
On the basis of the assembly
in step 4, use screws W to
assemble the board B.
05
Step 4
WX4
B
WX6
VX2
Step 5
Step 3
EN:
On the basis of the assembly
in step 3, use screws W and
V to assemble the assembly
of step 5.
06
05

EN:
Assemble part J to
board K with screw X.
Do this twice.
07
J
K
X
EN:
On the basis of the assembly
in step 7, use screws W to
assemble the board N.
08
WX2
Step 7
N
EN:
On the basis of the assembly in
step 8, use nuts U and screws T
to assemble boards L and M,
and then thread the screws V
into the top holes of boards K to
facilitate the assembly of
wooden sticks later.
09
ML
Step 8
UX2
T X2
V X2
06

EN:
Install the assembly of step
11 to the assembly of step 6
with screws W.
EN:
On the basis of the
assembly in step 9, use
screws W and screws V
(threaded on boards K)
to install the assembly
of step 10.
11
EN:
Thread the sticks O onto the
cloth P.
10
OX2
P
WX2
Step 9
Step 10
12
WX4
Step 6
Step 11
07

Your toy is only meant to be assembled once.
• After you have assembled your toy, do not dismantle it again as this
may weaken the joints and screws leaving the toy unsafe for use.
• Regularly check that all of the bolts are fully tightened.(But do not
over tighten)
• Do not allow children to sit, stand, play or climb on the top surface.
Failure to do so may cause the product to become unstable.
• Use the toy on a flat level surface only.
• This Kids Kitchen Set is not suitable for outdoor use. The coatings will
become scratched and product damage may occur.
• Please check the assembly of the toy regularly and frequently tighten
the bolts. If regular maintenance is not carried out, the product may
cease to function properly.
13
WARNING:
08

Please give us a chance to make it right and do better !
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP !
Contact Us !
Do NOT return this item. US:[e-mail]
UK:[e-mail]
AU:[email protected]
US office: Fontana UK office: Ipswich AU office: Truganina