Costway GT3450 User manual

www.costway.com
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Visit us: www.costway.com
Follow Costway
Please give us a chance to make it right and do better！
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP!
USER’S MANUAL
GT3450
EN
Garden Cart Rolling Work Seat

2
www.costway.com
3
Contact Us!
Do NOT return this item.
Contact our friendly customer service department for help first.
E-mail
US: [e-mail]
UK: [e-mail]
Before You StartBefore You Start
Please read all instructions carefully.
Retain instructions for future reference.
Seperate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near to the
area in which they will be placed in use, to avoid moving the product
unnecessarily once assembled.
Always place the product on a flat, steady and stable surface.
Keep all small parts and packaging materials for this product away from
babies and children as they potentially pose a serious choking hazard.
www.costway.com
Read these instructions completely before beginning assembly.
STEP 1
Place the frame as shown in Figure 1. Attach the plastic tray where shown in Figure 1,
using the two small reinforcing plates, four 6x15mm bolts, four 6mm washers, and four
6mm nuts. Attach the basket where shown in Figure 1
STEP2
Insert the rear axle into the back of the frame. Slide one axle bracket onto each end of the
rear axle. Mount one 16mm washer and one wheel(with the valve stem facing out), then
slide another 16mm washer onto each axle (front and rear). Insert a cotter pin through the
predrilled hole at the end of the axle. Be sure to open and fold the cotter pin over to
secure the wheel in place.
This product requires assembly.Carefully remove all the parts from the box and
identify and organize them before proceeding with the assembly.Refer to the Parts
List diagram below.You will require two Phillips screwdrivers(#2 and #3)and two
adjustable wrenches.
Safety Instructions
This is not a toy.Not for use by children
Maximum load capacity of rolling seat:330 lb
Maximum load capacity of plastic tray:5 lb
Do not overinflate the tires. Maximum pressure is 30 psi.
Do not use on inclines, seat may tip.
Do not operate if any part is damaged or broken.
3
3

5
www.costway.com
Welcome to visit our website and purchase our quality products!
Reward Points
Exclusive Customer Service
Personalized Recommendaons
Permanent Shopping Cart
Order History
We would like to extend our hearelt thanks to
all of our customers for taking me to assemble
this product and giving us valuable feedbacks.
www.costway.com
Your suggestions and comments for COSTWAY are really important to us!
We sincerely solicit you to go back to our shop and leave a good rating in just a
simple click. It would be quite encouraging if you could kindly do so like below:
February 24, 2019
Great products so far. Fast delivery, easy setup, and working without any issues.
Great products so far
With your inspiring rating, COSTWAY will be more consistent to offer you
EASY SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!
US office: Fontana, California
UK office: Ipswich
www.costway.com
STEP 3
Place the steering link connector (nub side up) onto the front axle support assembly.
Secure with one 8x25mm bolts(in the middle),two 8x20mm bolts(on both sides),three
8mm washers and three 8mm nuts.
STEP 4
Attach the seat to the seat post (already mounted on the frame) using four M10x15mm
bolts, four 10mm washers, and four10mm nuts. Rotate the seat to adjust the height of
the seat.
4