Courtyard Casual Sheldon 5532 User manual

Page 1 of 8
5532/Sheldon round Coffee Table

MADE IN VIETNAM
Page 2 of 8
5532/Sheldon round Coffee Table
1-Person Assembly
10 Minutes Assembly Time
1. Choose an assembly location that is flat and in close
proximity to where product will be used.
2. To prevent scratching of finish, assemble on
clean, soft surface such as carpet or cloth.
3. Remove all packing material, staples, and packing
straps from the carton. Carefully unpack product.
4. Review Part List and Hardware List and ensure all
components are present and in good condition. For
missing or damaged components contact:
[email protected]
1. KEEP ALL HARDWARE OUT OF REACH OF
CHILDREN.
2. TO AVOID ANY RISK OF SUFFOCATION TO
CHILDREN AND ANIMALS, DISPOSE, PLASTIC
PACKING MATERIAL IMMEDIATELY.
1. Prior to each assembly step, identify the required parts
and hardware.
2. DO NOT over-tighten hardware, damage may occur.
3. DO NOT use power tools during assembly.
4. DO NOT sit or stand on partially assembled product.
1. Rated for residential (non-commercial) use only.
2. Keep fingers away from hinged area of table.
3. Use table in a flat non-slippery surface only.
4. DO NOT use product if any component becomes
damaged. Check all hardware periodically and re-tighten
as necessary.
5. DO NOT stand or sit on product. Use only for intended
purpose.
6. DO NOT drag product across floor. Exercise care when
moving product.
7. DO NOT place hot items directly onto product surface.
8. DO NOT use harsh abrasives or commercial cleaners.
Wipe with soft, damp cloth.
9. DO NOT allow liquid of any kind to remain on product.
Absorption may cause surface damage.
ASSEMBLY REQUIREMENT
ASSEMBLY PREPARATION
SAFETY PRECAUTION
ASSEMBLY PRECAUTION
CARE AND USE

A: Table top (1)
E: Spanner (1)
B: Leg (4)
Part List
C: Metal washer M2x18 (8) D: Hexagon headed bolt 8 x 15mm (8)
Page 3 of 8
5532/Sheldon round Coffee Table
Before beginning assembly, separate all parts and carefully study the parts diagrams below. Review all
parts and hardware before disposing of any packaging. You may receive extra hardware with your unit.
Contact Kingston Casual Customer Service at for missing hardware. [email protected]

Attach Leg (B) to apron of Table
top (A) using the Spanner (E) to
tighten the Metal washer M2x18
(C) and the Hexagon headed bolt
8 x 15mm (D) 100%.
Assembly Instructions
STEP 1
EA
B
D
CE
CDE
D 2pcs
C 2pcs
100%
D
C
Page 4 of 8
5532/Sheldon round Coffee Table

Assembly Instructions
STEP 2
100%
EA
B
D
CE
CDE
D 2pcs
C 2pcs
Attach Leg (B) to apron of Table
top (A) using the Spanner (E) to
tighten the Metal washer M2x18
(C) and the Hexagon headed bolt
8 x 15mm (D) 100%.
D
C
Page 5 of 8
5532/Sheldon round Coffee Table

Assembly Instructions
STEP 3
100%
EA
B
D
CE
CDE
D 2pcs
C 2pcs
D
C
Page 6 of 8
Attach Leg (B) to apron of Table
top (A) using the Spanner (E) to
tighten the Metal washer M2x18
(C) and the Hexagon headed bolt
8 x 15mm (D) 100%.
5532/Sheldon round Coffee Table

Assembly Instructions
STEP 4
100%
D
CEA
B
D
CE
CDE
D 2pcs
C 2pcs
Page 7 of 8
Attach Leg (B) to apron of Table
top (A) using the Spanner (E) to
tighten the Metal washer M2x18
(C) and the Hexagon headed bolt
8 x 15mm (D) 100%.
5532/Sheldon round Coffee Table

Rotate the table.
Assembly is complete.
The table is ready for use.
Assembly Instructions
STEP 5
Page 8 of 8
5532/Sheldon round Coffee Table