Courtyard Creations KUS862B User manual

ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
Attention:
Make sure that each bolt needed for all steps matches
the corresponding figure to ensure proper assembly.
Step 1:
Place the back assembly (#1) onto a non-abrasive
surface, such as a carpet. Insert the seat assembly (#2)
into the back assembly (#1). See Figure 1.
FIGURE 1
KUS862B
KUS862B-CS04-6
KUS862B-CS02-1
KUS862B-CS01-2
KUS862B-CS01-3
17C33A07A5001Y4
17C33A0706001Y4
17C02A0755131Y4
17FA05040301-Y4
17C33A0712001Y4
18000337004
18000337006
17KAA0101----Y4
17KAA0201----Y4
61K862BY00001BA
61K862BX00001BA
PARTS LIST
PART
NO. MATERIAL CODE PART Q’TY
1
2
3
4
5
6
7
BACK ASSEMBLY
LEFT ARM
RIGHT ARM
BOLT M6*64
BOLT M6*16
BOLT M6*35
BOLT M6*14
SEAT ASSEMBLY
WASHER d6.5*D13*1.0
BOLT CAP
BOLT CAP M6
HEX.KEY WRENCH 4MM
SEAT CUSHION
BACK CUSHION
HEX.KEY WRENCH 6MM
8
9
10
11
12
13
14
15
1
1
1
1
2
2
2
21
1
6
2
6
2
1
1
1
1
STOP DON’T RETURN TO STORE!
PAGE 1 OF 3 COURTYARD CREATIONS INC.
Use the correct bolts as indicated. Do not tighten any of the bolts until the chair is completely
assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and
fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by
children. Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO.when contacting the service center.
!
!
!
!
!
2
SERVICE CENTER TOLL FREE NO.
TEL: [phone]
FAX: [phone]

#8 BOLT M6*35
35
#7 BOLT M6*14
14
14
15
FIGURE 3
STOP DON’T RETURN TO STORE!
PAGE 2 OF 3
Step 3:
Fasten the arms (#3 and #4) to the seat assembly (#2)
by using bolts (#6) and washers (#9). Keep the bolts
loose. See Figure 3.
Step 4:
Fasten the arms (#3 and #4) to the seat assembly (#2)
by using bolts (#7). Keep the bolts loose. See Figure 4.
Note:
The labels marked “L” and “R” on the arms (#3 and #4)
should coincide with Figure 3 to ensure proper assembly.
Step 5:
Fasten both the left arm (#3) and the right arm (#4) to
the back assembly (#1) by using bolts (#8) and washers
(#9). Make sure that all of the bolts have been tightened
completely and cover them with bolt caps (#10 and #11).
See Figure 5.
Step 2:
At the rear of the seat, fasten the back assembly (#1) to
the seat assembly (#2) by using bolts (#5) and washers
(#9). Keep the bolts loose. See Figure 2.
FIGURE 2
FIGURE 5
FIGURE 6
4
R
3
2
L
#5 BOLT M6*64
64 16
#6 BOLT M6*16
FIGURE 4
2
1
5
11
7
6
10
10
9
810
9
9
44
2
1
3
3
Step 6:
Place the back cushion (#14) and seat cushion (#15)
onto the chair. Secure the cushions to the chair by using
the plastic clamps. See Figure 6.

STOP DON’T RETURN TO STORE!
PAGE 3 OF 3
Cleaning and Maintenance
•Wash frame parts with mild soap and water, rinse thoroughly, and dry completely. Do not use
bleach, acid, or other solvents on the frame parts.
•Cushions may be washed on the surface only by using mild soap and water or a commercial
foaming upholstery cleaner if necessary. If washed, rinse well and hang to dry. Do not machine
wash or dry.
•We recommend the use of furniture covers when not in use.
•Inspect and tighten all bolts and fasteners on a regular basis to ensure proper performance and
safety of your chair.
•In order to prolong the life and beauty of your chair, we recommend that it be stored in a dry and
protected area during off season periods.
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
STOP!
Missing A Part?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
For further assistance,
please visit us at
[email protected]
Call Toll Free:
TEL: [phone]
FAX: [phone]
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THEPARTSLISTED.
IF YOU DO NOTLOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTSTHAT MAYHAVEBECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCEANY DIFFICULTY DURING ASSEMBLYOR IF ANY
PARTS ARE MISSING OR DAMAGED,CALL THE HELP LINE AT
1-877-539-7436 BEFORERETURNING THIS ITEM TO THE STORE.
PROVIDE THEFOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THEPRODUCT.
2-PARTNUMBER AND MATERIAL CODE OF THE PARTFROM THE PARTS
LIST.
MOST PROBLEMS CAN BERESOLVED WITHOUT RETURNING THIS
PRODUCT TO THERETAILER.
Warranty
•This product is covered by Courtyard Creations Inc. One–year limited warranty.
•Proof of purchase (dated register receipt) is required for warranty claims.
•It remains the customer’s responsibility for freight and packing charges to and from over service center.