Courtyard Creations KTS127W-WM User manual

ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
KTS127W-WM
1
2
3
4
5
6
7
8
1
1
1
1
6
2
2
10 16
15
14
13
12
11
10
9 2
2
6
2
2
1
1
1
KTS127W-CS01
KTS127W-CS02
KTS127W-CS03
KTS127W-CS04
17C33A0706001Y4
17C02A0755131Y4
17C01A0716072Y4
17FA05040301-Y4 17KAB1101----Y4
17KAA0201----Y4
17KAA0101----Y4
18000337002
18000337006
18000337004
18000C23001
18060603030201
SEAT ASSEMBLY
LEFT LEG
RIGHT LEG
BACK ASSEMBLY
BOLT M6*16
BOLT M6*14
WASHER d6.5*D13*1.0 NUT WRENCH 10&13MM
KEX.KEY WRENCH 6MM
KEX.KEY WRENCH 4MM
BOLT CAP M6
BOLT CAP M6
BOLT CAP
PLASTIC NUT M6*P1.0
Attention:
Make sure that each bolt needed for all steps matches the
corresponding figure to ensure proper assembly.
Step 1:
Place the right leg (#3) onto a non-abrasive surface, such as
a carpet. At the front of the lounge chair, fasten the seat
assembly (#1) to the legs (#2 and #3) by using bolts (#5) and
washers (#8). Keep the bolts loose. See Figure 1.
FIGURE 1
PARTS LIST
PART
NO. MATERIAL CODE PART Q’TY PART NO. MATERIAL CODE PART Q’TY
PAGE 1 OF 2 COURTYARD CREATIONS INC.
Use the correct bolts as indicated. Do not tighten any of the bolts until is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
SERVICE CENTER TOLL FREE NO.
TEL: [phone]
FAX: [phone]
STOP DON’T RETURN TO STORE!
!
!
!
!
!
16
3
2
11
5
8
1
#5 BOLT M6*16
BOLT M6*45
PLASTIC WASHER
L
R
Note:
The labels marked “L” and “R” on the legs (#2 and #3) should
coincide with Figure 1 to ensure proper assembly.

Cleaning and Maintenance
•Wash frame parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach, acid, or other
solvents on the frame parts.
•We recommend the use of furniture covers when not in use.
• Inspect and tighten all bolts and fasteners on a regular basis to ensure the proper performance and safety of your lounge.
• In order to prolong the life and beauty of your lounge, we recommend that it be stored in a dry and protected area during off
season periods.
Step 2:
At the front of the lounge chair, fasten the seat assembly
(#1) to the legs (#2 and #3) by using bolts (#6). Keep the
bolts loose. See Figure 2.
Step 3:
At the rear of the lounge chair, fasten the seat assembly (#1)
to the legs (#2 and #3) by using bolts (#5) and washers (#8).
See Figure 3.
Step 5:
Rotate the back assembly (#4) to desired position.
See Figure 5.
Step 4:
Turn the lounge to its upright position. Fasten the back
assembly (#4) to the seat assembly (#1) by using bolts (#7),
washers (#8), plastic washers (#9) and plastic nuts (#10).
Make sure that all of the bolts have been tightened completely
and cover them with bolt caps (#11, #12, and #13).
See Figure 4.
FIGURE 2 FIGURE 3
FIGURE 4 FULL ASSEMBLY
#6 BOLT M6*14
14 16
#5 BOLT M6*16
45
#7 BOLT M6*45
STOP DON’T RETURN TO STORE!
PAGE 2 OF 2
1
1
22
3
1
10
8
9
8
7
13
4
3
11
11
5
8
5
8
6
12
4
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
STOP!
Missing A Part?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
Call Toll Free:
TEL: [phone]
FAX: [phone]
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THEPARTSLISTED.
IF YOU DO NOTLOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTSTHAT MAYHAVEBECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCEANY DIFFICULTY DURING ASSEMBLYOR IF ANY
PARTS ARE MISSING OR DAMAGED,CALL THE HELP LINE AT
1-877-539-7436 BEFORERETURNING THIS ITEM TO THE STORE.
PROVIDE THEFOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THEPRODUCT.
2-PARTNUMBER AND MATERIAL CODE OF THE PARTFROM THE PARTS
LIST.
MOST PROBLEMS CAN BERESOLVED WITHOUT RETURNING THIS
PRODUCT TO THERETAILER.