Cozy N Safe EST-229 User manual

EST-229
G r o u p 2 / 3
1 5 k g t o 3 6 k g
( A p p r o x i m a t e l y 4 y e a r s - 1 1 y e a r s )

Thank you for purchasing this group 2, 3 car seat. If you
are not completely satisfied with the car seat or you would
like to change any accessory or obtain any help about the
car seat,you can contact our customer services department.
E S T - 2 2 9 C a r S e a t
Group 2, 3
12
1.Vital information-READ NOW.........................................4-5
2. Safety instruction...........................................................6
3. Using car seat in this way................................................6-7
4. Parts and interior equipment..........................................8
5. Assembling the seat.........................................................9-1 0
6. Installation of the seat......................................................11-21
6.1 3-point car seat belt installation................................ 11-14
6.2 EZFix installation....................................................15-21
7. Remove the cover...........................................................22-24
8. Maintenance and cleaning..............................................25
8.1 Daily maintenance...................................................25
8.2 Washing instruction.................................................25
Contents

34
1. This is a universal”and semi-universal child restraint,it is approved to
Regulation NO.44,04 series of amendments,for general use in vehicles and
it will fit most,but not all,car seats.
2. A correct fit is likely if the vehicle manufacturer has declared in the vehicle
handbook that the vehicle is capable of accepting a “Universal”child restraint
for this age group.
3. This child restraint has been classified as“Universal”under more stringent
conditions than those which applied to earlier designs which do not carry this
notice.
4. If in doubt,consult either the child restraint manufacturer or the retailer.
“ “ ”
Notice
!
This child restraint is classified for” (Semi-universal)”use and is suitable
for f ixing into the seat positions of t he following cars:
CAR FRONT REAR
Outer Outer Centre
NO Yes NO
Seat positions in other cars may also be suitable to accept this child restraint.If
in doubt,consult either the child restraint manufacturer or the retailer.
*
Onl y s uitable if t he ve hi cl e i s f itt e d wi t h 3-po i nt s a f et y bel ts, Appr ove d to
UN / ECE Regul a t i on No. 1 6 or ot he r e qui va l ent st a nda r ds.
1. Vital information-READ NOW
For your child’s safety,please read these instructions carefully before use and keep
them for future reference.Failure to follow the instructions contained in this manual
could result in serious injury to your child.
1.This child safety seat can only be used with the harness for children 15 to 36kg in
weight(Group II,III:15-36kg).
2.This instruction manual can be retained in the allocated pocket of the child seat for its
life period.
3. Do not use this child safety seat in the home. It has not been designed for home use
and should only be used in your car.
4. Never leave your child unattended in the child restraint system even for a short time.
5. The child safety seat should be changed when it has been subject to violent stresses
in an accident.
6. 
in use. In a crash or sudden stop, an unsecured child safety seat may injure other occupants.
7. Always make sure that any straps holding the seat restraint to the vehicle are tight,
any straps restraining the child should be adjusted to the child’s body,and check that
the straps are not twisted.
8. IMPORTANT! Ensuring that any lap straps are worn low down,so that the pelvis is firmly
engaged.
9. Do not use any load bearing contact points other than those described in the instructions
and marked on the child restraint ,when in doubt ,please contact the child restraint
manufacturer.

65
10.Any luggage or other objects liable to cause injuries in the event of a collision
should be properly secured.
11.The rigid items and plastic parts of a child restraint must be so located and installed
that they are not liable,during everyday use of the vehicle to become trapped by a
moveable seat or in a door of the vehicle.
12.Your child should always be fastened into the car seat as per the instruction to
prevent falling.
13.It is dangerous to make any alteration or additions to the device without the
approval of the competent authority. It is dangerous to not closely follow the installation
instruction
14.This child safety seat is designed for children from 15 to 36 kg.Never overload the
child safety seat more than one child or with other loads.
15.The child restraint must not be used without the cover.
16.The seat cover should not be replaced with any other than the one recommended
by the manufacturer,because the cover constitutes an integral part of the restraint
performance.
17.Before you adjust any movable or adjustable parts of your child safety seat,you
must remove your child from the child safety seat.
18.The child safety seat should be kept away from sunlight if the seat is not provided
with a textile cover,otherwise it may be too hot for the child’s skin.
19.Never use a second-hand product,as you can never be certain what was happened to it.
20.Notice: Do not use in any configuration not shown in the instructions.
2. Safety instruction
Only suitable if the approved vehicles are
fitted with 3 point safety-belts,approved
to U N / EC E Regulatio n N o .16 or other
equivalent standards.
3. U sing safety seat in this way
Forward facing traffic direction
Back facing traffic direction Error
Vehicle is only fitted with 2-point safety belt Error
Vehicle is fitted with 3-point safety belt Correct
Seat beside the driver Error
Rear seat Correct
Rear middle seats Three-point Belt Correct
Correct
DIAGONAL BELT
LAP BELT

87
3.1 Please carefully implement the Country Traffic Safety Regulations
●Do not install the child safety seat on a front seat with an airbag.
●
N O T I C E
You can install in this position
Unable to install in this position
Do not install the child safety seat
at the front seat with air bag.
Only with the three point
safety belt,can this location.
4. Parts and interior equipment
Manual bag
EZFix connector
Belt slot label
Height adjuster
Headrest
Backrest
Base
Safety belt
route slot
EZFix unlock button EZFix folding button
EZFix guide
Head belt guide EZFix hid en slotd

109
5. Assembling the seat
A 1
A 2
A 3
Step 3:Gently keep pressure on
hooks as you lift backrest up.
WARNING:DO NOT FORCE MAY
CAUSE DAMAGE.
Step 1:Align base and backrest
in a straight line.
Step 2:Place the hooks inside
the base securely.

1211
Suitable for the child from 15 to 36kgs(4-11years)
6.13-point car seat belt installation
6. Installation of the seat
B 1
B 2
Step1: Press the button on the bottom
and turn EZFix connector to hide.
B 3
Step 2: Place the child car seat on
the vehicle's seat.
B
A
C
B 4
Step 3:Follow the B4 routine to
install the child car seat.

1413
B 6
B 5
CLICK
Step 4: Put the child in the seat and
follow B4 routine.
Step 5: Adjust the height of headrest
and belt slot to suitable height of
child(B6、)B7
B 7
B 8
Step 6:Fasten car seat belt and
make sure,it is tight enough.
Notice: If car seat belt is too long,
it is NOT suitable to tighten the child
car seat.It will not keep the child
secure in the event of an impact.
Please check that the vehicle belt is
suitable before using the child car seat.
!
Too high Right
Too low

1615
6 . 2 E Z F i x i n s t a l l a t i o n
Step 1:Turn the seat to the
bottom and pull out EZFfix
connector.(C1、C2)
C 1
C 2
C 3
C 4
Step 2: Turn EZFix connector to
180 degrees.(C3)
Step 3:Find out EZFix connections
in the car.

1817
C 5
C 6
Step 5: Place the child car seat on
the vehicle seat and push back in
the direction of the EZFix guides.
Insert the EZFix connectors into
the guides.
Step 4: Insert ix guide into
EZFix connection
EZF Step 6: Ensure that the EZFix locking
system turns green to confirm that
the child seat is firmly connected.
C7
C8
Step 7: Put the child onto the child
car seat.

2019
Step 8: Pull car seat belt
following the belt route
and lock.
C9
A
BC
C10
Step 9: Adjust the height of
headrest and belt slot to a
suitable height for the
child.(C10,C11)
C11
C12
Step 10:Fasten car seat belt and
make sure, it is tight enough.
Notice: If car seat belt is too long, it is NOT suitable to tighten the
child car seat.It will not keep the child secure in the event of an impact.
Please check that the vehilce belt is suitable before using the child car
seat.
!
Too high Right
Too low

2221
C 1 3
C 1 4
Step 11: To release the child car seat
pull on the locking mechanism.when
you hear a “Click”and the indicator
turns red and the EZFix connector has
been released.Then pull your child car
seat forward.
Step 12: Take child seat away from
car seat.
D 1
D 2
Step 1:Turn the seat to the back
and unlock the snap fastener.
Step 2:Separate the backrest from
the booster by unhooking the two
parts.see D2
7. R emove the cover

2423
D 3
D 4
Step 4:
out the cover
Pull all directions to take
(D4).
Step 3:Remove the elastic loops
attaching the fabric cover.
1 5
Step 5: Take off the fabric cover.
D 5

repeat the procedure to put the
fabric cover back on.
Follow in reverse order and

25
8. M aintenance and cleaning
8.1 Daily maintenance
1. Ensure to periodically check the child seat during daily use.The child seat
should be replaced after an accident.
2. Please keep this child seat in a dry and ventilated place to avoid damp mold.
3. If the child seat becomes dusty,clean the seat belt and the plastic pieces
by swiping them with a damp sponge and allowing them to dry naturally.
4. For cleaning the entire child seat fabric cover,please refer to the
8.2 washing instructions.
8. 2 Wa shing instruction
Never use any solvant,chemical detergent or lubricant on any part of your
child seat.
Hand wash,
water
temperature
below 30
Do not bleach Dryclean,any
solvent except
trichloroethylene
Do not tumble dry Do not iron