CPAP PAP Clean PCS-300 User manual

Portable CPAP Cleaning System
Model #PCS-300
1Ozone Cleaner with Lithium-Ion Battery
2PAP Clean Cleaning Bag
3CPAP Tube Adapters
418” CPAP Tube
5USB Charging Power Block
6USB C-Type Charging Cord
CPAP Life, LLC
1595 Peachtree Parkway, Suite 204-135, Cumming, GA 30041
Instructional videos at www.papclean.com
2
5
3
6
1
4

General Descripon
Thank you for purchasing the PAP Clean Portable CPAP Cleaning System
The enre portable, care-free and dry process requires no water, soap
or detergents to clean. You can clean and deodorize all your CPAP
related accessories including your mask, tubing and water humidier
chamber through a stream of controlled ozone.
• Do not stand over ozone generator while it is operang.
• Do not ingest or breathe in the ozone release. Always use in a well
venlated area.
• Do not aempt to deodorize your CPAP in the cleaning bag.
• Do not reassemble your CPAP accessories for at least one hour
aer cleaning, or anyme the ozone generator has stopped.
The screen will display and when the cycle is nished.
• If you experience shortness of breath or respiratory issues, consult
your physician immediately.
• Keep out of reach of children.
• Do not let children play with the product.
• Use only as intended to clean CPAP accessories. The ozone concen-
traon is regulated by the ozone device, bag and the run me. Use
only as directed.
Environmental Noce
This product contains a rechargeable baery. To support a greener
environment, please do not dispose of this product with household
waste. Please follow appropriate local regulaons regarding the
disposal of baeries in your area.
2
WARNING

Ozone Generator
The PAP Clean Portable CPAP Cleaner includes a rechargeable
baery. To charge it, connect the device as shown below. Connect
the USB cable to the charging block and plug into a power outlet.
A charging symbol will come on when it is charging correctly.
The full baery icon will display when it is fully charged.
The white poron in the baery icon shows the remaining power
capacity of the baery. When the baery has less than 5% baery life this
empty baery icon is displayed and the unit starts to ush.
For the best baery performance and baery life, power o while
charging. Charging me averages 2-3 hours and may vary depending
on the baery’s remaining capacity. If the unit stops working during
use aer a full charge, the baery may have reached the end of its
service life and the enre unit will need to be replaced.
3
Tubing Port
Charging the Baery
Status Screen
Type C-Inlet Air Inlet
On/O Buon
Mode Buon

Before you begin...
1) Do not aempt to clean CPAP device, only
Humidier Tub, Tubing and CPAP Mask
WARNING: Never breathe in or ingest ozone
2) Disconnect CPAP Tubing from PAP Therapy Device
3) Remove Humidier
Chamber/Tub from
PAP Device.
Separate Tubing & Humidier Chamber/Tub
4

Empty Humidier Chamber/Tub
4) Thoroughly remove all water from
the Humidier Chamber/Tub.
5) Hold the Cleaning Bag as shown, with open zipper on the le
and the Velcro strap on the right. Place the empty Humidier
Chamber/Tub in Cleaning Bag, towards the le side.
5