CPS COLOR Corob D410 User manual

COROB™ D410
Automatic Dispenser
User’s Manual
Version 1.0 - R0 (November 2006)DU006C010015500 - ENGLISH

COROB™ D410
User’s Manual
Automatic Dispenser
COROB™ D410
Version 1.0 - R0 (November 2006)
© COPYRIGHT 2006, CPS Color Equipment S.p.A.
All rights reserved in all countries
If you require additional copies of this manual or further technical information about it, please write to:
CPS Color Equipment S.p.A.
Via Agricoltura 103 • 41038 San Felice s/P • Modena • Italy
Phone: [phone] • Fax: [phone]
Web site: www.cpscolor.com
Email: [email protected]
INTELLECTUAL PROPERTY RIGHTS AND DISCLAIMER
No part of this manual may be translated into any other languages and/or adapted and/or reproduced in any form, or by any means,
electronic or mechanical, including but not limited to photocopying and recording, without prior written permission of CPS Color Equipment
S.p.A.
CPSCOLOR™ and COROB™ are registered trademarks or commercial trademarks used on an exclusive basis by CPS Color Equipment S.p.A.
and its affiliated companies (hereinafter CPS Color).
A failure of a trademark to appear hereunder does not mean that CPS Color does not use the trademark in question nor does it constitute a
waiver by CPS Color of any related intellectual property rights.
Valuable proprietary technical information contained in the present manual are referring to proprietary know-how, designs, drawings and/or
applications used on an exclusive basis by CPS Color frequently covered by Patents and/or Patent Applications and thus protected by
International and National Intellectual Property Laws.
Unless otherwise indicated, all references to other companies not being part of CPS Color Group, their names, data and addresses used in the
screens and/or examples are purely coincidental and serve as a reference only to clarify the use of the COROB™ products.
CPS Color has carefully reviewed the wording and imagines contained in the present manual, nevertheless CPS Color reserves the right to
modify and/or update the information herein to correct editorial errors and/or inaccuracy of the information herein without notice or
commitment on its part.
The present manual contains all information necessary for the foreseeable and normal use of the COROB™ products by the final user.
The manual does not contain guidelines and/or information for product repair. For safety reasons, only trained and authorized technical
personnel should perform such interventions. Failure to do so may result in personal injury or damage to the product.
For the purpose mentioned above, CPS Color has appointed authorized technical personnel.
Authorized technical personnel shall mean technicians who have attended a CPS Color technical training course.
Unauthorized interventions could void the warranty coverage of your COROB™ product pursuant to the sales contract or to the General Sales
Conditions of CPS Color.
CPS Color does not intend to limit or exclude its liability against any statutory provisions under any applicable law. Therefore the reference to
above warranty limitations or exclusions may not apply.
The final user can ask CPS Color or visit the web site www.cpscolor.com for contact details about the nearest authorized technical service.
PRODUCT DISPOSAL AND RECYCLING
This equipment must not be disposed of with unsorted municipal waste.
Carry out a separate collection.
Pursuant to the WEEE Directive, collection, treatment, recovery and environmentally sound
disposal of Waste Electrical and Electronic Equipment (WEEE) shall be carried out in
compliance with the national measures of each EU-Member State implementing the
Directive.
For more information about proper disposal and recycling of your COROB™ product, please
contact the company at the address [e-mail].
For the colorants remaining in the canisters, for the machine components most soiled with
colorant and if any products have been used on the machine that require special disposal
procedures, follow local regulations when disposing of waste.

ORIGINAL INTRUCTIONS
CONTENTS - 1
CONTENTS
1 GENERAL INFORMATION............................................................................................................3
1.1 Purpose and use of this manual ..............................................................................................3
1.1.1 Conventionally used graphics........................................................................................3
1.2 Identifying information ..........................................................................................................3
1.3 Intended and improper use ....................................................................................................4
1.4 Definitions ...........................................................................................................................4
2 SAFETY ......................................................................................................................................5
2.1 General warnings ..................................................................................................................5
2.2 Warnings on the use of colorants ............................................................................................6
2.3 Residual risks .......................................................................................................................7
2.4 Position of labels ...................................................................................................................8
2.5 Safety devices ......................................................................................................................9
3 FEATURES ................................................................................................................................11
3.1 Description of the machine ................................................................................................... 11
3.2 Description of units ............................................................................................................. 12
3.3 Standard and optional configurations .....................................................................................14
3.4 Usable cans........................................................................................................................ 14
4 SHIPPING, HANDLING AND UNPACKING.................................................................................. 15
4.1 General warnings ................................................................................................................15
4.2 Environment conditions of the installation site.........................................................................15
4.3 Unpacking and placement ....................................................................................................16
4.3.1 Standard material supplied ......................................................................................... 18
4.4 Installation.........................................................................................................................18
4.5 Packing and handling........................................................................................................... 18
5 START-UP.................................................................................................................................19
5.1 General warnings ................................................................................................................19
5.2 Control devices and connections............................................................................................20
5.3 Electrical connection and start-up..........................................................................................21
5.4 Initialization ....................................................................................................................... 22
5.5 Emergency stop ..................................................................................................................22
5.6 Shut-down .........................................................................................................................22
6 USING THE DISPENSER ............................................................................................................25
6.1 General warnings ................................................................................................................25
6.2 Running the machine...........................................................................................................25
6.2.1 Loading the can - Lift manual shelf ..............................................................................26
6.2.2 Loading the can - Semiautomatic shelf .........................................................................27
6.2.3 Use of the can centering device...................................................................................28
6.2.4 Use of the Bung Hole Locator......................................................................................28
6.2.5 Punching the cans .....................................................................................................29
6.2.6 Dispensing ...............................................................................................................30
6.3 Automatic timed stirring....................................................................................................... 30
6.4 Refilling the canisters ..........................................................................................................31
6.5 Troubleshooting .................................................................................................................. 33
7 ORDINARY MAINTENANCE ....................................................................................................... 35
7.1 General warnings ................................................................................................................35
7.2 Maintenance table ..............................................................................................................35
7.3 Cleaning ............................................................................................................................36

2 - CONTENTS
COROB™ D410
7.3.1 External cleaning.......................................................................................................36
7.3.2 Cleaning the nozzle center..........................................................................................36
7.4 Moistening the humidifier cap sponge.....................................................................................37
7.5 Checking and replacing the punch tool ...................................................................................38
7.6 Refilling the humidifier system tanks......................................................................................38
8 TECHNICAL SPECIFICATIONS...................................................................................................39
8.1 Technical data ....................................................................................................................39
8.2 Dimensions ........................................................................................................................40
9 APPENDIX ................................................................................................................................41
9.1 Declaration of conformity .....................................................................................................41
9.2 Reference standards ............................................................................................................42
9.3 Warranty ...........................................................................................................................42

ORIGINAL INSTRUCTIONS
GENERAL INFORMATION - 3
1 GENERAL INFORMATION
1.1 Purpose and use of this manual
This manual, inserted in the product packing, contains instructions on the use and routine maintenance
needed to uphold the machine's performance over time.
Read this manual carefully before using the machine.
The manual is to be considered an integral part of the machine, and must be stored until it is fully dismantled.
The manual contains all information available at the time of preparation regarding the machine and any
accessories; for accessories, the manual includes any variations or changes that involve different operating
procedures.
Should it be lost or partially ruined, so that its contents can no longer be read in full, you must request a new
manual from the manufacturer.
Some of the illustrations in this manual were taken from prototypes; some details may differ on
machines in standard production.
1.1.1 Conventionally used graphics
Boldface type is used to highlight notes or information of particular importance to a topic.
DANGER
Indicates a risk of personal injury.
WARNING
Indicates a risk of damage to the machine that could interfere with its operation.
Indicates important instructions referring to precautionary rules and/or measures to adopt.
Indicates situations and/or operations that involve the management software installed on the
computer.
Indicates that to carry out the intervention described, the use of the specified tools is required.
1.2 Identifying information
The machine has an identification plate (chapter 2.4), indicating:
• Manufacturer's name.
• CE and WEEE marking.
• Machine model.
• Year of manufacture.
• Serial number.
• Electrical specifications.
Do not remove or tamper with the identification plate in any way.