CQR PADP2 Series User manual

CQR Fire & Security
PADP2 Series User Manual
CQR Fire & Security, 125 Pasture Road, Moreton, Wirral, United Kingdom CH46 4TH

Overview
Your security system is equipped with a CQR Personal Attack button designed to summon an urgent response.
Your CQR Personal Attack button should only be used for the purpose intended.
Your system installer will guide you on the method of operation and resetting procedure.
Features
Note that your CQR Personal Attack button has the following features:
Two red buttons that press inwards to activate the system.
A keyhole slot to reset the Personal Attack Button.
A status window which indicates the normal or activated states.
A key is supplied for resetting the button after a activation.
Method of Operation
Only, In the event of an emergency you simply press the two red buttons simultaneously to activate the PA
button.
Pressing only one button will not activate the system; both buttons need to be pressed together for a
successful activation.
The PA status window will show red in colour when activated.
Resetting
After activating the PA button, the device will require resetting.
To reset the button insert key into the keyhole slot and turn clockwise 90°
After resetting, the PA status window will show green in colour.
Two red buttons.
Press Both to Activate.
Status Window
Green = OK
Red = Activated
Keyhole Slot