Craftsman NEXTEC 320.35078 User manual

2.5 AMP MULTI-TOOL
Model No. 320.35078
_WARNING: To reduce the risk of injury,
read and understand the Operator's manual
before using this product.
• WARRANTY
• SAFETY
• ASSEMBLY
• OPERATION
• MAINTENANCE
• ESPANOL
Sears Brands Management Corporation, Hoffrnan Estates,
IL 60179 U.S.A.
www, craftsman,com

Warranty page 2
Safety Symbols pages 4-5
Safety Instructions pages 6-8
Description pages 9-10
Assembly pages 10-11
Operation pages 12-25
Maintenance page 26
Troubleshooting page 26
Part List pages 27-29
CRAFTSMAN ONE YEAR LiMiTED WARRANTY
FOR ONE YEAR from the date of purchase, this product is warranted
against any defects in material or workmanship. With proof of purchase,
defective product will be replaced free of charge.
For warranty coverage details to obtain free replacement, visit the web
site: www.craftsman.com
This warranty does not cover the sandpaper, rasps or blades, which are
expendable parts that can wear out from normal use within the warranty
period.
This warranty is void if this product is ever used while providing commercial
services or if rented to another person.
This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state.
Sears Brands Management Corporation, Hoffman Estates, IL 60179
This multi-tool has many features for making its use more pleasant and
enjoyable. Safety, performance, and dependability have been given top priority
in the design of this product making it easy to maintain and operate.
SAVE THESE INSTRUCTIONS!
READ ALL iNSTRUCTiONS!
Page 2 35078 ManuaLRevised_12 0615

,_, DANGER: People with electronic devices, such as pacemakers, should
consult their physician(s) before using this product. Operation of electrical
equipment in close proximity to a heart pacemaker could cause interference or
failure of the pacemaker.
_,WARNING: Some dust created by power sanding, sawing, grinding, drilling
and other construction activities contains chemicals known to the state of
California to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
• Lead from lead-based paints,
Crystalline silica from bricks and cement and other masonry products, and
Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type
of work. To reduce your exposure to these chemical: work in a well ventilated
area, and work with approved safety equipment, such as those dust masks that
are specially designed to filter out microscopic particles.
35078 Manual_Revised_12-0615 Page 3

The purpose of safety symbols is to attract your attention to possible dangers.
The safety symbols and the explanations with them deserve your careful
attention and understanding. The symbol warnings do not, by themselves,
eliminate any danger. The instructions and warnings they give are no substitutes
for proper accident prevention measures.
WARNING: Be sure to read and understand all safety instructions in this
manual, including all safety alert symbols such as "DANGER," "WARNING," and
"CAUTION" before using this tool. Failure to follow all instructions listed in this
manual may result in electric shock, fire and/or serious personal injury.
SYMBOL SIGNAL MEANING
SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, OR CAUTION; may
be used in conjunction with other symbols or pictographs.
,_ DANGER: Indicates an imminently hazardous situation, which, if not
avoided, will result in death or serious injury.
,_ WARNING: Indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury.
,_ CAUTION: Indicates a potentially hazardous situation, which, if not avoided,
could result in minor or moderate injury.
Damage prevention and Information Messages
These inform the user of important information and/or instructions that could
lead to equipment or other property damage if they are not followed. Each
message is preceded by the word "NOTICE", as in the example below:
NOTICE: Equipment and/or property damage may result if these instructions are
not followed.
,_, WARNING: To ensure safety and reliability, all repairs should be performed
by a qualified service technician.
,_ WARNING: The operation of any power tools can result in
foreign objects being thrown into your eyes, which can result
in severe eye damage. Before beginning power tool operation,
always wear safety goggles or safety glasses with side shield
and a full face shield when needed. We recommend a Wide
Vision Safety Mask for use over eyeglasses or standard safety
glasses with side shields. Always use eye protection which is
marked to comply with ANSI Z87.1.
Page 4 35078 ManuaLRevised_12 0615

SAVE THESE iNSTRUCTiONS
Some of these following symbols may be used on this tool. Please study them
and learn their meaning. Proper interpretation of these symbols will allow you to
operate the tool better and more safely.
SYMBOL NAME DESIGNATION/EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
min Minutes Time
'*_ Alternating Current Type of current
Direct Current Type or a characteristic of current
n O No Load Speed Rotational speed, at no load
] Class II Construction Double-insulated construction
.../min Per Minute Revolutions, strokes, surface speed,
orbits, etc., per minute
Wet Conditions Alert Do not expose to rain or use in damp
locations.
To reduce the risk of injury, user must
Read The Operator's Manual read and understand operator's manual
before using this product.
O Always wear safety goggles or safety
Eye Protection glasses with side shields and a full face
shield when operating this product.
_, Alert Precautions that involve
Safety your safety.
No Hands Symbol Failure to keep your hands away from theblade will result in serious personal injury.
No Hands Failure to keep your hands away from the
Symbol blade will result in serious personal injury.
No Hands Failure to keep your hands away from the
Symbol blade will result in serious personal injury.
No Hands Symbol Failure to keep your hands away from the
blade will result in serious personal injury.
Hot Surface To reduce the risk of injury or damage,avoid contact with any hot surface.
35078 Manual_Revised_12-0615 Page 5

GENERAL POWER TOOL SAFETY WARNINGS
,_, WARNING: Read and understand all instructions. Failure to follow all
instructions in this Operator's Manual may result in electric shock, fire, and/or
serious personal injury.
Save all warnings and instructions for future reference.
= The term "power tool" in all warnings listed below refers to corded power
tools or battery-operated (cordless) power tools.
WORK AREA SAFETY
• Keep your work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive environments, such as in the
presence of flammabJe liquids, gases, or dust. Power tools create sparks,
which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool.
Distractions may cause you to lose control.
ELECTRICAL SAFETY
=Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with grounded power tools. Unmodified
plugs and matching outlets will reduce the risk of electric shock.
= Avoid body contact with grounded surfaces, such as pipes, radiators,
ranges, and refrigerators. There is an increased risk of electric shock if
your body is grounded.
= Do not expose power tools to rain or wet conditions. Water entering a
power tool will increase the risk of electric shock.
• Do not abuse the cord. Never use the cord for carrying, pulling, or
unplugging the power tool. Keep the cord away from heat, oil, sharp edges,
or moving parts. Damaged or entangled cords increase the risk of electric
shock.
When operating a power tool outdoors, use an extension cord suitable
for outdoor use. Use of a cord suitable for outdoor use reduces the risk of
electric shock.
if operating a power tool in a damp location is unavoidable, use a
ground fault circuit interrupter (GFCl} protected supply. Use of a GFCI
reduces the risk of electric shock.
Page 6 35078 ManuaLRevised_12 06:$5

PERSONAL SAFETY
• Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use the tool while tired or under the
influence of drugs, alcohol, or medication. A moment of inattention while
operating power tools may result in serious personal injury.
• Use personal protective equipment. Always wear eye protection.
Protective equipment, such as a dust mask, non-skid safety shoes, hard
hat, or hearing protection, used for appropriate conditions, will reduce
personal injuries.
• Prevent unintentional starting. Ensure that the switch is in the OFF
position before connecting to a power source and/or battery, picking up
or carrying the tool. Carrying power tools with your finger on the switch or
energizing power tools that have the switch turned on invites accidents.
Remove any adjusting key or wrench before turning the power tool
on. A wrench or a key left attached to a rotating part of the power tool may
result in personal injury.
• Do not overreach. Keep proper footing and balance at all times. This
enables better control of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewelry. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewelry or long
hair can be caught in moving parts.
• If devices are provided for the connection of dust extraction and
collection facilities, ensure that these are connected and properly used.
Use of these devices can reduce dust-related hazards.
POWER TOOL USE AND CARE
• Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and more safely at
the rate for which it was designed.
• Do not use the power tool if the switch does not turn it on and off. Any
power tool that cannot be controlled with the switch is dangerous and must
be repaired.
• Disconnect the plug from the power source and/or the battery from the
power tool before making any adjustments, changing accessories, or
storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
• Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to operate
the power tool. Power tools are dangerous in the hands of untrained users.
• Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool
operation. If damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
35078 Manual_Revised_12-0615 Page 7

Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
Use the power tool, accessories, tool bits, etc. in accordance with
these instructions, taking into account the working conditions and the
work to be performed. Use of the power tool for operations different from
those intended could result in a hazardous situation.
SERVICE
Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power
tool is maintained.
Follow instructions in the Maintenance section of this manual. Use of
unauthorized parts or failure to follow Maintenance instructions may create
a risk of shock or injury.
SPECIFIC SAFETY RULES FOR MULTI-TOOL
• Hold power tools by their insulated gripping surfaces when performing
an operation where the cutting tool may contact hidden wiring or its
own cord. Contact with a" live" wire will make exposed metal parts of the
tool live and will shock the operator.
•A suitable breathing respirator must be worn while sanding lead paint,
some woods and metal to avoid breathing the harmful/toxic dust or air.
=Always wear safety goggles and a dust mask when sanding, especially
when sanding over-head.
= The machine is not suitable for wet sanding.
= Do not use sanding paper larger than needed. Extra paper extending
beyond the sanding pad can cause serious lacerations.
= Secure the workpiece. A workpiece clamped with clamping devices or in a
vice is held more securely than by hand.
= Wear protective gloves when changing cutting tools. Cutting tools
become hot after prolonged use..
= Keep hands away from the cutting range. Do not reach under the
workpiece. Contact with the blade can lead to injuries.
Page 8 35078 ManuaLRevised_12 0615

KNOW YOUR MULTI=TOOL (Fig. 1}
Fig. 1
Quick-Release Lever
On/Off Switch Live Tool
Indicator Light
Variable-Speed Dial
Drive Shaft
Ribs
_[ange Bolt
PRODUCT SEPCIFICATIONS
Input 2.5 Amps
Rating 120V, 60Hz, AC
Oscillation Rate 11000-19000/min
Oscillation Angle _+1.4degrees
Tool Weight 3.5 Ibs.
_, WARNING: The safe use of this product requires an understanding of the
information on the tool and in this operator's manual as well as knowledge of the
project you are attempting. Before use of this product, familiarize yourself with
all operating features and safety rules.
35078 Manual_Revised_12-0615 Page 9

QUICK-RELEASE LEVER
The quick-release lever allows for tool-less exchange of application tools.
VARIABLE=SPEED ADJUSTMENT DiAL
The variable-speed dial is located on the back of your tool for selecting the
appropriate speed.
LED WORKLIGHT
The LED worklight is located in the front of the tool. This feature provides extra
light for increased visibility.
LIVE TOOL INDICATOR LIGHT
The light shines green when tool is plugged into a power source.
,_ WARNING: If any parts are broken or missing, do not attempt to plug the
multi-tool to a power source or operate the multi-tool until the broken or missing
parts are replaced. Failure to do so could result in serious injury.
_1_ WARNING: Do not attempt to modify this tool or create accessories not
recommended for use with this multi-tool. Any such alteration or modification is
misuse and could result in a hazardous condition leading to serious injury.
,_ WARNING: To prevent accidental starting that could cause serious personal
injury, always unplug the tool from the power source when assembling parts.
UNPACKING
• Carefully remove the tool and any accessories from the carton. Make sure
that all items listed in the packing list are included.
Inspect the tool carefully to make sure no breakage or damage occurred
during shipping.
Do not discard the packing material until you have carefully inspected and
satisfactorily operated the tool.
If any parts are damaged or missing, please return the product to the place
of purchase.
PACKING LiST
Multi-tool, flush cut blade, scraper blade, carbide triangular rasp, carbide
circular blade, circular saw blade, sanding plate and sandpapers, carrying bag
and operator's manual.
Page 10 35078 Manual_Revised_12 0615

SELECTING THE APPLiCATiON TOOL
APPLiCATiON TOOL MATERIALS
Sanding Plate and
Sandpaper
Circular Saw Blade
Carbide Circular Blade
Scraper Blade
Carbide Triangular Rasp
Flush Cut Blade
Bare or Painted Wood,
Plaster, other surfaces,
depending on sandpaper grit
Wood, Plastic, Drywall, Non-
Ferrous Metals, Thin Sheet
Metal and other materials
Grout, Plaster, Porous
Concrete and Masonry
Paint & Varnish, Bonded
Carpet, Soft Adhesives, Vinyl
Flooring, wood and other
Floor Coverings.
Hardened Adhesives, Thinset,
Wood and Masonry
Wood, Plastic, Drywall, Soft
Metals and other materials
35078 Manual_Revised_12-0615 Page 11

ON/OFF SWITCH (Fig. 2)
1. Connect the power cord of
your multi-tool to a standard
household power outlet.
2. To turn the tool ON, push the
on/off switch forward.
3. To turn the tool OFF, pull the
on/off switch backward.
VARIABLE=SPEED DIAL (Fig. 3)
The variable-speed feature on this
multi-tool allows you to match the
proper speed to the material being
cut, sawed, scraped or sanded,
enhancing the overall performance
of your tool and helping to save the
application tool from undue wear.
1. The variable-speed dial is
used to adjust the speed of
the application tool.
2. Turn the dial to increase or
decrease the speed of the
tool (Fig. 3).
3. Position "1" selects the
slowest speed; position "6"
selects the fastest speed.
Adjust the application
tool speed for optimum
performance.
NOTICE: Determine the optimum
speed by making a trial cut in a
scrap piece of material.
LED WORKLIGHT (Fig. 4)
Fig. 2
Fig. 3
Variable-speed dial
Fig. 4
LED worklight
The LED worklight, located on
the front of the tool, will illuminate when the on/off switch is in the forward
(ON) position, and will turn off when the switch is pulled backwards (OFF). The
worklight provides additional light for operation in lower-light conditions.
Page 12 35078 ManuaLRevised_12 0615

LiVE TOOL iNDiCATOR LIGHT
(Fig. 5}
The live tool indicator light is a
green light located on the back
of the tool. This light is always on
when the multi-tool is plugged into
a power source.
:ig. 5Live tool indicator light
ATTACHING THE APPLiCATiON TOOLS (Figs. 6, 7, 8, 9 and 10}
,_k WARNING: Failure to unplug the tool from the power source when
assembling parts, making adjustments, or changing application tools could
result in accidental starting and cause serious injury.
,_, CAUTION: For all work or when changing application tools, always wear
protective gloves. The sharp edges of the application tools will cause personal
injury. Application tools can become very hot during use.
WARNING: Check that the application tools are correctly attached, incorrect
or insecurely fastened application tools can come Boose during operation and
cause a hazard.
1.
2.
3.
Disconnect the multi-tool from the power source.
Push the quick-release lever
fully open with your palm to
loosen the flange bolt (Fig. 6).
Remove the flange bolt.
Ensure that the inner threads
and the drive shaft are clean.
Fig. 6
35078 Manual_Revised_12-0615 Page 13

4. Align the grooves on the
application tool with the four
raised ribs on the drive shaft.
Put the application tool onto
the drive shaft (Figs. 7 and 8).
5. With your gloved hand
holding the application tool,
insert and depress the flange
bolt until you hear a click
indicating that the application
tool is secured (Fig. 9).
6. Push the quick-release lever
with your palm to lock the
driver shaft (Fig. 10).
NOTICE: Attach the application
tool in the desired orientation
for the task at hand. The shaft is
configured so that the application
tool can be attached at 0°, 45 °,
90 °, 270 ° and 315 °. The flush
cut blade, the scraper blade, the
carbide circular blade and the
circular saw blade should never
be attached so that they are
facing backwards.
,_ WARNING: Do not attach the
flush cut blade, the scraper blade,
carbide circular blade or circular
saw blade facing backwards, as
operation in this position may
cause serious injury.
Fig. 7
Fig. 8
Fig. 9
Page 14 35078 ManuaLRevised_12 0615

SANDPAPER KIT DESCRmPTION
(Fig. 11)
• 9 pieces sandpaper: 3 each
of 60, 120, and 180 grit.
• Always apply to the compatible
sanding plate (supplied with
your multi-tool).
The sandpaper kit is also
compatible with the Bosch
PMF180E, GOP 10.8V Li and
Craftsman Nextec Multi-tool.
Fig. 11
TO mNSTALL THE SANDING PLATE
1.
2.
3.
4.
Disconnect the multi-tool from the power source.
Push the quick-release Beverfully open with your palm to Boosen the flange
bolt (Fig. 6). Remove the flange bolt.
Ensure that the inner threads and the drive shaft are clean.
Align the grooves on the
sanding plate with the four Fig. 12
raised ribs on the drive shaft; Groove
put the sanding plate onto the
drive shaft (Fig. 12).
5. With your gloved hand holding
the sanding plate, insert and
depress the flange bolt until
you hear a click indicating that
the scraper blade is secured.
6. Push the quick-release Bever Rib
with your palm to lock the
driver shaft (Fig. 10)o
NOTICE: The ribs on the shaft and the grooves in the application tools permit
a firm connection of the application tools in increments of 45 ° around the shaft.
Apply the application tool in the orientation appropriate to the task at hand.
35078 Manual_Revised_12-0615 Page 15

TO iNSTALL THE SANDPAPER
(Fig. 12a)
,_ WARNING: Check that the
sanding plate and sandpaper are
correctly attached. An incorrect or
insecurely fastened application tool
can come loose during operation
and cause a hazard.
1. Follow the directions for
attaching the application tool
to attach the sanding plate to
the multi-tool.
Fig. 12a
Sandpaper
2. Align the sandpaper with the sanding plate and use your hand to press it
firmly onto the sanding plate.
3. Press the sandpaper firmly against a smooth surface for a short period of
time, then turn on the tool. The burr will form a non-slip bond with the outer
edge of the sandpaper felt. This will avoid premature wear.
4. If one point has become worn, pull off the sandpaper, turn it 120 ° and place
it on the sanding plate again.
SANDING (Fig. 13}
,_ WARNING: Do not touch the
motor housing after prolonged
use; it could be very hot.
= The removal rate and
the sanding pattern are
determined by the choice
of sanding sheet and the
work surface.
13
Apply uniform sanding
pressure to extend the life of
the sanding sheets.
• Intensifying the sanding pressure does not lead to an increase of the
sanding capacity; it increases wear on the machine and the sanding sheet.
For precise sanding of edges, corners and hard to reach areas, use only the
tip or an edge of the sanding sheet.
When selectively sanding on one spot, the sanding sheet can heat up
considerably. Remove the tool from the surface periodically to permit the
sanding sheet to cool down.
A sanding sheet that has been used for metal should not be used for
other materials.
• Use only Craftsman sanding accessories.
Page 16 35078 Manual_Revised_12 0615

CIRCULAR SAW BLADE
DESCRiPTiON {Fig° 14}
High=speed steel circular
cutting blade.
Designed for cutting wood,
plastic, drywall, non=ferrous
metals, thin sheet metal and
other materials.
The circular saw blade is
also compatible with the
Fein Multi=Master tool and
Craftsman Nextec Multi=tool.
TO mNSTALL THE CIRCULAR SAW BLADE
CAUTION: Wear protective gloves.
WARNING: Use sharp, undamaged saw blades only. Deformed or blunt saw
blades or saw blades that are otherwise damaged can break.
WARNING: When sawing light building materials, observe the precautions
and the recommendations dthe material suppliers.
_ WAF{NmNG: Plunge cuts may only be applied to soft materials, such as
wood, gypsum plaster boards, etc.
WARNING: The sawing teeth are very sharp. Do not touch during mounting
and application.
WARNING: Do not attach Fig. 15
the circular cutting blade facing
backwards (fig 15). Backwards
attachment my result in user injury.
1. Disconnect the multi=tool
from the power source.
35078 Manual Revised 12-0615 Page 17

2. Push the quick-release lever
fully open with your palm to
loosen the flange bolt (Fig. 16).
Remove the flange bolt.
3. Ensure that the inner threads
and the drive shaft are clean.
4. Align the grooves on the
circular cutting blade with the
four raised ribs on the drive
shaft; put the blade onto the
drive shaft (Fig. 17).
5. With your gloved hand
holding the blade, insert and
depress the flange bolt until
you hear a click indicating
that the blade is secured.
6. Press the quick-release lever
with your palm to lock the
drive shaft (Fig. 10).
,_ WARNING: Do not attach
the circular saw blade facing
backwards, as operation in this
position may cause serious injury.
CARBIDE CIRCULAR BLADE
DESCRiPTiON (Fig. 18)
The carbide circular blade is
designed to cut out the grout
around wall tiles. It can also
be used to cut plaster, porous
concrete and masonry.
• Carbide-tipped, circular
grout disc.
Designed for grout, plaster,
Fig. 16
Fig. 17
©
Fig. 18
masonry or porous concrete removal around the wall tiles.
The carbide circular blade is compatible with Fein Multi-Master Tool and
Craftsman Nextec Multi-tool.
Page 18 35078 ManuaLRevised_12 06:$5

TO iNSTALL THE CARBIDE CIRCULAR BLADE
WARNING: Use sharp, undamaged saw blades only. Deformed, blunt saw
blades or saw blades that are otherwise damaged can break.
_, WARNING: When sawing light building materials, observe the precautions
and the recommendations of the material suppliers.
_, WARNING: Plunge cuts may only be applied to soft materials, such as
wood, gypsum plaster boards, etc.
_, CAUTION: Wear protective gloves.
1. Disconnect the multi-tool from the power source.
2. Push the quick-release lever fully open with your palm to loosen the flange
bolt (Fig. 6). Remove the flange bolt.
3. Ensure that the inner threads and the drive shaft are clean.
4. Align the grooves on the
carbide circular blade with the
four raised ribs on the drive
shaft; put the application tool
onto the drive shaft (Fig. 19).
5. With your gloved hand holding
the blade, insert and depress
the flange bolt until you hear a
click indicating that the carbide
circular blade is secured.
6. Push the quick-release lever
with your palm to lock the
driver shaft (Fig. 10).
WARNING: Do not attach
the carbide circular blade facing
backwards, as operation in this
position may cause serious injury.
NOTICE: The ribs on the shaft and
the grooves in the application tools
permit a firm connection of the
application tools in increments of
45 ° around the shaft, at 0% 45°, 90 °,
270 ° and 315 ° (Fig. 20). Apply the
application tool in the orientation
appropriate to the task at hand.
Fig. 19
Fig. 20
OO
270 °
45 °
315 °
90 °
35078 Manual_Revised_12-0615 Page 19

CUTTING GROUT WiTH THE
CARBIDE CIRCULAR BLADE
(Fig. 21)
1. Connect the multi-tool to a
power source.
2. Draw the cutting lines on
the workpiece, if desired.
3. Turn on the tool and allow it to
come to the full desired speed.
4. Place the carbide circular
blade against the workpiece
at a 90 ° angle.
5. Cut out the grout around the
tile, then use a hand chisel to
remove the tile from the wall.
NOTICE: When cutting grout,
masonry and porous cement,
take into consideration that the
application tools wear heavily when
used for longer periods of time.
SCRAPER BLADE DESCRiPTiON
(Fig. 22)
_.Fig. 21
Fig. 22
• Steel scraping blade designed for paint & varnish, bonded carpet, soft
adhesives, vinyl flooring, wood and other
floor coverings.
The scraper blade is also compatible with the Fein
Multi-Master Tool and Craftsman Nextec Multi-tool.
TO iNSTALL THE SCRAPER BLADE
A
,_L CAUTION: Wear protective gloves.
,_ WARNING: Check that the application tool is correctly attached. Incorrect or
insecurely fastened application tool can come loose during operation and cause
a hazard.
1. Disconnect the multi-tool from the power source.
2. Push the quick-release lever fully open with your palm to loosen the flange
bolt (Fig. 6). Remove the flange bolt.
3. Ensure that the inner threads and the drive shaft are clean.
Page 20 35078 ManuaLRevised_12 06:$5