Craftsman 315.175310 User manual

Operator's Manual
[ERRFTSMRN'I
FIXED ROUTER BASE
Model No.
315.175310
Save this manual for future reference
CAUTION: Read and follow all safety
rules and operating instructions before
first use of this product.
Customer Help Line: 1-800-932-3188
Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman Estates, IL 60179 USA
Visit the Craftsman Web page: www.sears.com/craftsman
COgS
983000-174
1-03

•Introduction ............................................................................................................................................................... 2
• Safety Rules ............................................................................................................................................................. 3
• Unpacking ................................................................................................................................................................. 3
• Features ................................................................................................................................................................... 4
• Assembly .................................................................................................................................................................. 5
• Exploded View and Parts List ............................................................................................................................... 6-7
• Customer Service Information .................................................................................................................................. 8
Your router accessory has many features for making
routing operations more pleasant and enjoyable. Safety,
performance and dependability have been given top
priority in the design of this product, making it easy to
maintain and operate.
_1 WARNING: Do not attempt to use this product
until you thoroughly read and completely
understand the operator's manual. Pay close
attention to the safety rules, including Dangers,
Warnings, and Cautions. If you use this product
properly and only as intended, you will enjoy years
of safe, reliable service.
_lb Look for this symbol to point out important safety precautions. It means attention!H
Your safety is involved.
,_ WARNING:
The operation of any tool can result in foreign objects being thrown into your eyes, which
can result in severe eye damage. Before beginning operation, always wear safety goggles
or safety glasses with side shields and a full face shield when needed. We recommend Wide
Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields.
Always wear eye protection which is marked to comply with ANSI Z87.1.
2

READ ALL INSTRUCTIONS
•Read these instructions and the instructions for
the router motor thoroughly before using this
accessory.
• Know your power tool. Read the operator's manual
for the router motor carefully. Learn the router's
applications and limitations as well as the specific
potential hazards related to this tool.
•Keep the work area clean and well lit. Cluttered
benches and dark areas invite accidents.
• Always wear safety glasses with side shields.
Everyday eyeglasses have only impact-resistant
lenses; they are NOT safety glasses.
•Disconnect the plug from power source before
making any adjustments, changing accessories,
or storing the tool. Such preventive safety mea-
sures reduce the risk of starting the tool accidentally.
•Do not use this product with other equipment or
for other purposes.
• Save these instructions. Refer to them frequently
and use them to instruct other users. If you loan
someone this product, also loan these instructions.
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the
explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves
eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention
measures.
SYMBOL MEANING
DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in serious injury.
CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may result in minor or
moderate injury. It may also be used to alert against unsafe practices that may cause property damage.
Important: Advises you of important information or instructionsvital to the operation or maintenance of
the equipment.
Note: Advises you of additional information concerning the operation or maintenance of the equipment.
INSTRUCTIONS
• Carefully remove the accessory from the box.
• Make sure that all items listed in the packing list are
included.
• Inspect the accessory carefully to be sure no break-
age or damage occurred during shipping.
• Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
tool with the accessory.
• If any parts are damaged or missing, please call
1-800-932-3188 for assistance.
PACKING LIST
Fixed Base
Operator's Manual
a_ WARNING: If any parts are missing, do not
operate your tool until the missing parts are
replaced. Failure to do so could result in serious
personal injury.
3

Before using the router, familiarize yourself with all
operating features and safety requirements. However,
do not let familiarity with the tool make you careless.
,_ WARNING: Exercise caution when using the
router. Careless actions, for even a fraction of a
second, can result in serious personal injury.
Your new router accessory is equipped with the
following features. See Figure 1.
DEPTH ADJUSTMENT RING
The depth adjustment ring allows you to adjust the
depth of cut.
LOCKING ARM
The locking arm secures the motor housing for the fixed
base.
CHIP SHIELD
A clear plastic chip shield is installed on the front of the
router base for protection against flying dust and chips.
Peel the horsepower label from chip shield and discard.
ERGONOMIC DESIGN
The design of the router base provides for easy
handling. It is designed for comfort and ease of grasp
when operating in different positions and at different
angles.
DEPTH
ADJUSTMENT
RING
CHIP
SHIELD ERGONOMIC
HANDLE
Fig. 1
4

_, WARNING:Theroutershouldneverbe
connectedtoapowersupplywhenyouare
assemblingparts,makingadjustments,cleaning,
performingmaintenance,orwhenthetoolisnotin
use.Disconnectingthetoolpreventsaccidental
startingthatcouldcauseseriousinjury.
INSTALLING THE ROUTER MOTOR IN THE
BASE
See Figures 2 and 3.
Follow these steps to install the router motor in the
base.
1. Unplug the router.
_, WARNING: Failure to unplug the tool could result
in serious injury due to accidental starting.
2. Place the base on a flat surface.
3. Loosen the locking arm.
4. Align the notch in the depth adjustment ring with the
indicator point on the base.
8. Slide the base onto the motor housing.
9. Turn the depth adjustment ring clockwise until the
spindle lock button slides above the locking arm.
10. Tighten the locking arm.
LOCKING
ARM
NOTCH
Fig. 2
5. Place the router motor upside down.
6. Align the spindle lock button with the groove in the
base.
7. Depress and hold the spindle lock button on the
motor.
Fig. 3
REMOVING THE CHIP SHIELD
A clear plastic chip shield is installed on the front of the
router base for protection against flying dust and chips.
,_ WARNING: Do not use the router unless the chip
shield is properly in place. Failure to heed this
warning could result in serious injury.
Follow these steps to remove the chip shield.
1. Squeeze the tabs on each side of the chip shield.
2. Pull out the chip shield.
Note: To replace the chip shield, squeeze the tabs
on each side of the chip shield and push the shield
into place.
5

CRAFTSMAN FIXED ROUTER BASE -- MODEL NUMBER 315.175310
8
11
10
7
3
_18
0/16
13 15
1 4
2
7
8
Note:The assembly shown represents an important part of the double insulated system. To avoid the possi-
bility of alteration or damage to the system, service should be performed by your nearest Sears repair
center. Contact your nearest Sears retail store for service center information.
6

CRAFTSMAN FIXED ROUTER BASE -- MODEL NUMBER 315.175310
The model number is on a plate attached to the motor housing. Always mention the model number all
in
correspondence regarding your FIXED ROUTER BASE or when ordering repair parts.
SEE BACK PAGE FOR PARTS ORDERING INSTRUCTIONS
PARTS LIST
Key Part
No. No.
1982993-092
2 612191-004
3 998586-001
4 983474-001
5 982991-001
6 982934-064
7 982500-131
8 617966-009
9 983689-001
10 982935-001
11 982933-001
12 982966-001
13 703477-057
14 982972-001
15 706382-357
16 982948-032
17 983451-202
18 983449-001
983000-174
Description Qty.
Base Assembly ...................................................................................................... 1
Subbase ................................................................................................................ 1
* Screw (#10-32 x 1/4 in. Pan Hal.) **STD511102 ................................................... 3
Right Handle Assembly ......................................................................................... 1
Left Handle Assembly ........................................................................................... 1
Pin Needle Roller .................................................................................................. 1
* Screw (#10-24 x 3/4 in. Pan Hal.) **STD511007 ................................................... 2
* Screw (#8-10 x 5/8 in. Pan Hd.) ............................................................................ 4
Spline .................................................................................................................... 1
Depth Indicator Ring .............................................................................................. 1
Depth Adjustment Ring ......................................................................................... 1
Chip Shield ............................................................................................................ 1
* Hex Nut (#1/4-20) **STD541425 ........................................................................... 1
Lock Stud .............................................................................................................. 1
Flat Washer ........................................................................................................... 1
Pin Needle Roller .................................................................................................. 1
Locking Arm .......................................................................................................... 1
Data Plate .............................................................................................................. 1
Operator's Manual ................................................................................................. 1
m
* Standard Hardware Item -- May Be Purchased Locally
** Available from Div. 98 -- Source 980.00
b,_ =A
7

Your Home
For repair-in your home-of all major brand appliances,
lawn and garden equipment, or heating and cooling systems,
no matter who made it, no matter who sold it!
For the replacement parts, accessories and
owner's manuals that you need to do-it-yourself.
For Sears professional installation of home appliances
and items like garage door openers and water heaters.
1-800-4-MY-HOME ®(1-800-469-4663)
Call anytime, day or night (U.S.A. and Canada)
www.sears.com www.sears.ca
Our Home
For repair of carry-in items like vacuums, lawn equipment,
and electronics, call or go on-line for the location of your nearest
Sears Parts & Repair Center.
1-800-488-1222
Call anytime, day or night (U.S.A. only)
www.sears.com
To purchase a protection agreement (U.S.A.)
or maintenance agreement (Canada) on a product serviced by Sears:
1-800-827-6655 (U.S.A.) 1-800-361-6665 (Canada)
Para pedir servicio de reparaci6n Au Canada pour service en fran_:ais:
a domicilio, y para ordenar piezas: 1-800-LE-FOYER Mc
1-888-SU-HOGAR sM (1-800-533-6937)
(1-888-784-6427) www.sears.ca
TM SM
® Registered Trademark /Trademark /Service Mark of Sears, Roebuck and Co.
TM SM
® Marca Registrada /Marca de F_brica /Marca de Servicio de Sears, Roebuck and Co.
MC MD
Marque de commerce /Marque d_pos6e de Sears, Roebuck and Co. @Sears, Roebuck and Co.